PT1 HOW I PUT 26’’ RIMS ON MY IMPALA SS
HTML-код
- Опубликовано: 13 фев 2023
- This video shows what I did different to put 26 inch rims on a 96 impala ss.
@LifewithCoreySSG_ @CJON32s @RedAndBlackCollection
@RELLTOREAL @Mr96Impala @SprayWayCustoms
@TrueGrittCustoms @Mr75Delt
@houstonincimpalasncaprices6600
@DonkPlanet @DonkmasterTV 
Развлечения
![Remble - Colors (ft. Mozzy & Stoneda5th) [Official Music Video]](http://i.ytimg.com/vi/KF-3AU9g9xg/mqdefault.jpg)
The back was was too low and you sit her on jack stands and drop the rear end. Makes it so much easier.
💯💪🏿..I appreciate it
Ice cold 🥶 💯💯💪🏾💪🏾
I appreciate bro💯💪🏿
💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
💯💪🏿
Blue cheese almost ready❤
Almost 💯💪🏿
You’re goin to need some adjustable extended trailing arms for the rear so you can center the rear wheels in the wheel well… might also have to shorten your rear axle just a tad bit to eliminate rubbing
💯💪🏿..I got it done already
@@Coming-n-hotwhere get them from fam ?
That’s some good game.
@@bottomboybg2498 check with BMR suspension
I see ya bro! I know exactly where that shop is… I grew up like 2 minutes from there in Glendale park… Yosef has the cheapest prices!
Check out the Billet Stop if you need mods done to it. They do a lotta work on these cars that’s necessary to fit those larger wheels on them.
Definitely gone have to trim that bumper unfortunately..
Apparently Yosef is well known in the area…I seen a video on RUclips somebody was going to his shop and then I got 2 recommendations to go to his shop…Glad I did…the guy was kool as hell and got me in and out
Who center your rear end, I have the kit but No one in Louisiana to put it on
I went to the billet shop in Waxahachie Tx.. getting somebody to do your rear end right I recommend them guys…you got all your stuff so that’s save you a few dollars and he do it the same day..they don’t take long..
Should have went with lexani tires,these other tires are to fat.lexani is still 275/25/26 but they are thinner, less cutting, ive owned 3 impalas on 26s and this is the only tire i use,and i never centered my rear wheel, if you center it you will have to cut more in back....
Nall I didn’t want a smaller tire I like the 255/30/26 tires because of these bad roads in Texas…the cutting was really minor in my situation I will show that in my next video….💯💪🏿..
What shops in Texas puts 6s on impala I just moved here
I went to Big Boys it’s down the street from Corleone Forge ..in Fort Worth
Welcome to Texas 🫡
What's that part number for the studs? I'm putting 6's on a 95 Fleetwood.
💯💪🏿💙..I don’t remember
Extended Length Lower Control Arms
💯💪🏿
Skies
Your rearend isn't centered that's what the problem is 😡
What did you do to get the front on have a impala and can’t figure what to do to the front but back end of front?
My next video I will try to go in more detail but my car was already pre cut from the previous owner it also have those blocks in the spring in the front which I will add 2 more to each side with a total of 6 3 on each side…n air shocks in the front with a lil cutting..and you should be good..every car is different..so you might have to do more r less cutting…
@@Coming-n-hot I cut the bumper to clear the front of the wheel and that clears but it catches the back metal and rubs.
So I got my guty to cut that plate off cuz on the passenger side the whole plate was gone but on the drive side it will hit in the back …so I got my guy to hit it with a hammer and cute the metal plate out some were it was scrubbing at…..
@@Coming-n-hot damn u nailed it mine is the driver side as well. So cut it then? I appreciate it brother I’ve been trying to figure this out all week then you video popped up on the Facebook group.
Yea cut it bro…and good luck on it..💯💪🏿
What size lips
5”
You should've jacked it up from the side instead of the rear end. It's not hanging down, when you jacked the rear end up it took the hub up also. Your working against yourself
Fosho💪🏿💯
Struggling to put a wheel on he grew up without a daddy
Rear needed to be jacked up higher
💯💪🏿
26 inch on impala smh
💯💪🏿