Hey I really like the way you’ve insulated the tub, we have the same one and are running in the winter as well, our insulation is not as good as you can see from our video. I’m taking notes I like the side wall insulation. Might have to add something similar. We’re in Michigan is does get cold. Is the tub still working well?
Are you able to estimate an average of how much it costs per month to run it? Of course it will cost more in the winter. Also, do you remember how much you spent on materials for insulation? Thank you!
Do you have the energysense cover? Can you still use that with your insulation boards around it? How does your insulation compare with using that cover?
Hi there i appreciate your video. I live in Edmonton Alberta and considering doing something like this. I'm wondering how much money you spend per month on power?
@@doingstuffwiththecards4446 Thanks! I wound up building a box with plywood and 2x4s with fiberglass insulation, and foam sheets under the tub and on top. We'll see how it handles -5 F tomorrow night in Tennessee.
What’s the coldest temp it’s has survived. I’m in Edmonton Alberta and thinking of trying to build something for winter but definitely worried about the few -40 days we get.
We had a lot of -30 days last year in Ontario. It did fantastic. I didn’t use the tub on those days but we had a steady week with it that cold and it made it through and stayed hot
You did a great job I live in Ontario Canada too I got an intex inflatable hot tub pure spa plus I haven't set it up yet Because it's so cold we are getting a bad snow storm tonight and very strong winds hope all goes well God bless you always have a beautiful day
We just went a couple inches more than the tub around the whole perimeter. We included the motor in the box so it stays warm as well. We added around 6” more for the base total so the foam side rests on top of the base.
This is a fantastic setup but my only concern is the cost of all the R10 sheets. They are 60 bucks a piece at home depot and looks like you needed one per side, two on the bottom, and two on the top (assuming tub is 71" x 71" x 28"). That's over $500 after tax for just the insulation!
Does is stay fry inside or is there a lot of condensation? I want to do this but was concerned that it may become stained with mold/mildew from condensation? Just curious
I did not have condensation or mildew. The biggest issue is after a big rainfall or snowfall if you leave the water sitting too long it will saturate the lid from the top
I don’t use the jets in the really cold weather as you are right it does cool it down faster. -5 and warmer I will though for a few minutes and it drops from 104 to 102 pretty quick - stays even for about 10-15 min then drops again so after about 10 min I turn the jets off.
Lasted all winter long and all through the summer. Had to make a few small motor repairs this fall as I do run it all the time including all winter so the bromine wore out the flow control valve and I had to replace the magnet.
I am going to buy durospan r10 and make the same insulation. I think the way you did is the best thing ordinary people could try
Excellent! Thank you! Exactly what I was looking for!
Thanks! I was looking everywhere for a fix. I had plans for a shed with heat...now I think I will copy your idea! Thanks again.
Hey I really like the way you’ve insulated the tub, we have the same one and are running in the winter as well, our insulation is not as good as you can see from our video. I’m taking notes I like the side wall insulation. Might have to add something similar. We’re in Michigan is does get cold. Is the tub still working well?
This is great thanks
Glad you like it!
So how is it holding up? I live in Utah it hasn't been minus 9 yet. This year it got to 7 degrees F. Just checking to see if it's still working
Are you able to estimate an average of how much it costs per month to run it? Of course it will cost more in the winter. Also, do you remember how much you spent on materials for insulation? Thank you!
Do you have the energysense cover? Can you still use that with your insulation boards around it? How does your insulation compare with using that cover?
Hi there i appreciate your video. I live in Edmonton Alberta and considering doing something like this. I'm wondering how much money you spend per month on power?
I would say about $30 a month extra.
Very nice. How sturdy is the insulation for climbing in and out?
When you use 2” foam it is very sturdy. We used extra pieces from cuts to reinforce the corner that we always get in and out from just to be sure
@@doingstuffwiththecards4446 Thanks! I wound up building a box with plywood and 2x4s with fiberglass insulation, and foam sheets under the tub and on top. We'll see how it handles -5 F tomorrow night in Tennessee.
What’s the coldest temp it’s has survived. I’m in Edmonton Alberta and thinking of trying to build something for winter but definitely worried about the few -40 days we get.
We had a lot of -30 days last year in Ontario. It did fantastic. I didn’t use the tub on those days but we had a steady week with it that cold and it made it through and stayed hot
@@doingstuffwiththecards4446 good to know! Thanks
You did a great job I live in Ontario Canada too I got an intex inflatable hot tub pure spa plus I haven't set it up yet Because it's so cold we are getting a bad snow storm tonight and very strong winds hope all goes well God bless you always have a beautiful day
Any updates regarding your hot tub?
@@steeltownbrown52 I have it set up its amazing I love it so much thank you have a beautiful day God bless you always
@@steeltownbrown52 I will be doing a review on my channel if you are interested
Would you share the mesures for your box? We just bought the sane hot tub (hawaii). Thx
We just went a couple inches more than the tub around the whole perimeter. We included the motor in the box so it stays warm as well. We added around 6” more for the base total so the foam side rests on top of the base.
This is a fantastic setup but my only concern is the cost of all the R10 sheets. They are 60 bucks a piece at home depot and looks like you needed one per side, two on the bottom, and two on the top (assuming tub is 71" x 71" x 28"). That's over $500 after tax for just the insulation!
It is true. We did spend a bit on the foam.
Does is stay fry inside or is there a lot of condensation? I want to do this but was concerned that it may become stained with mold/mildew from condensation? Just curious
I did not have condensation or mildew. The biggest issue is after a big rainfall or snowfall if you leave the water sitting too long it will saturate the lid from the top
The problem is as soon as you turn on the jets, it will go from 104 degrees to 96 degrees in 5 minutes so you really can't enjoy it long.
I don’t use the jets in the really cold weather as you are right it does cool it down faster. -5 and warmer I will though for a few minutes and it drops from 104 to 102 pretty quick - stays even for about 10-15 min then drops again so after about 10 min I turn the jets off.
So this worked all winter? Can yo send me links to all
What is the Tape you used to attach all pieces together?
I used tuck tape or construction sheathing tape which can withstand the cold
hi. is it running all winter ?
Yes, it is
Do you fill the bottom floor (where the drain is) with water?
Not sure what you mean. I have foam under the tub as well as around it. I only have one area which I can fill with water
Updates one year later?
Lasted all winter long and all through the summer. Had to make a few small motor repairs this fall as I do run it all the time including all winter so the bromine wore out the flow control valve and I had to replace the magnet.