I'm installing these on a 2022 Z650 ABS 50th Anniversary edition along with the integrated tail light. I ran into an issue, contacted CSR, hopefully it's a simple thing, but I'm afraid I'll have to send back one side of the signals. The problem I have is one side, when I connect the light blue wire the brake lights come on and only the brake lights. I installed just the tail light. Tail light works as expected. Running light, programmable brake light, and turn signals all work fine. I install the Right side of Qaud D lights. Works fine. Install the left side and the moment I touch the blue wire for that side to the blue wire Y plug, I don't know what it's called..it's the 1 into 2 plug on the harness, the brake lights come on. Since the blue wire is the running light, I'm guessing there is a short in the light or something. I couldn't get it to do anything else. Like I said, I did contact customer service. I'm just hoping this doesn't take forever to replace/fix. Other than that issue. These lights look great on the red z650 combined with the smoke integrated light. Customer Service has been great answering all the questions I've sent them. I'm sure this is just a unicorn and I got unlucky. I've installed the BL6 Sequential front lights and they worked perfect. The tail light works perfect. I just hit this one snag.
If you emailed our Customer Support, they will be able to respond and get you all sorted. A video showing the issue would be helpful but either way, we will make sure we get you all taken care of!
Just wondering after installation, would the tst integrated tail light sequential function still work along with the sequential turn & brake lights? I have an R3 and ordered an ZX6R to pickup next month, got the TST kits and turn signals to work together on the R3 so wondering would it be the same.
I'm not sure I fully understand your question but if you're wanting to use our tail light paired with these signals and have both flash at the same rate, as long as an LED Flasher Relay is installed, it should work with no issues.
Not sure if it’s the same. I have the 2024 ninja 500 se model. I was going to install a tst fender eliminator kit with quadrix d lights. However I’m stuck with finding which wiring is for the tail light and which is for the brake light… any help would be appreciated. Can’t find it in the manual nor online so far lol
@@kaimanahana6972 are you asking about the color codes for the oem wires leading to the tail light? We can provide that. I will have to glance inside our 500 when i get to the office. I don't want to go from memory.
@@TSTindustries it’s the wires. From connecting the sub harness har1023. Connecting that to the wires on the bike themselves. I need to figure out which is the tail light and which is the break light before installing.
These turn signals are beautiful! Great product as always!
Thank you . Glad you like them
I'm installing these on a 2022 Z650 ABS 50th Anniversary edition along with the integrated tail light. I ran into an issue, contacted CSR, hopefully it's a simple thing, but I'm afraid I'll have to send back one side of the signals. The problem I have is one side, when I connect the light blue wire the brake lights come on and only the brake lights. I installed just the tail light. Tail light works as expected. Running light, programmable brake light, and turn signals all work fine. I install the Right side of Qaud D lights. Works fine. Install the left side and the moment I touch the blue wire for that side to the blue wire Y plug, I don't know what it's called..it's the 1 into 2 plug on the harness, the brake lights come on. Since the blue wire is the running light, I'm guessing there is a short in the light or something. I couldn't get it to do anything else. Like I said, I did contact customer service. I'm just hoping this doesn't take forever to replace/fix.
Other than that issue. These lights look great on the red z650 combined with the smoke integrated light.
Customer Service has been great answering all the questions I've sent them. I'm sure this is just a unicorn and I got unlucky.
I've installed the BL6 Sequential front lights and they worked perfect. The tail light works perfect. I just hit this one snag.
If you emailed our Customer Support, they will be able to respond and get you all sorted. A video showing the issue would be helpful but either way, we will make sure we get you all taken care of!
Been looking for this one!! Thank you fellas!
You're welcome. Sorry it took a few more days than I told you.
@@TSTindustries no worries brotha! This video helps tremendously
Just wondering after installation, would the tst integrated tail light sequential function still work along with the sequential turn & brake lights?
I have an R3 and ordered an ZX6R to pickup next month, got the TST kits and turn signals to work together on the R3 so wondering would it be the same.
I'm not sure I fully understand your question but if you're wanting to use our tail light paired with these signals and have both flash at the same rate, as long as an LED Flasher Relay is installed, it should work with no issues.
These look great, Is there any chance there will be a non-sequential option?
Not at this time but if the demand calls for it, we can potentially explore that option.
@@TSTindustries Well fine, I'll order 1 pair for now anyway. Thank you for the reply :)
Not sure if it’s the same. I have the 2024 ninja 500 se model. I was going to install a tst fender eliminator kit with quadrix d lights. However I’m stuck with finding which wiring is for the tail light and which is for the brake light… any help would be appreciated. Can’t find it in the manual nor online so far lol
@@kaimanahana6972 are you asking about the color codes for the oem wires leading to the tail light? We can provide that. I will have to glance inside our 500 when i get to the office. I don't want to go from memory.
@@TSTindustries it’s the wires. From connecting the sub harness har1023. Connecting that to the wires on the bike themselves. I need to figure out which is the tail light and which is the break light before installing.
@@kaimanahana6972 from HAR-1023 to your bike:
Yellow -> Blue
Blue -> Red
Black -> Black
i cant get my quadrix to strobe, only my brake light
Dang. I shoulda gone with red brake lines. Who saw that looking good? Not me!
the bike has enough red accents that red lines end up looking good
@@TSTindustries Its smart. Just right.