Well, in my 20 years of piecing quilt tops, you are the first person on RUclips or in a quilt class that I have ever seen clearly define and show with a steady camera up close so that you can clearly see what a scant 1/4 inch actually looks like. Those descriptions you listed are all I have ever heard with no demonstration of it . Thank you, thank you, THANK YOU!!!😊
Many computerised sewing machines advise you not to have magnetic items near them. An alternative way is to use a bright tape as a guide. Great tutorials.
I just found your site, you have taught me so much that I guess I have lost over the years, you teach me how to do some things again, I used to teach, now I donate to churches for the needy. I love paper piecing now, I am 76 and turned my small apartment into my sewing studio, I feel you’re bringing me back. I so thank you for bringing my artistry back.❤
I’m almost finished my long awaited scrap Quilt plus “passion fabric of wild flowers “ instead of a solid. My much loved scraps have gently followed I’m totes, for about 20 years. I’m happy I did, I had pretty good taste. You’re quite the inspirational person. If I can figure out how to send you a pic, I shall I. Thank you Tiffany!!
I can't tell you how many video's and blogs I've watched and read but still didn't get what they were saying about the scant quarter inch. I'm thrilled to have found you!!! Your video's are clear and easy to understand. Thank you!!!!
Oh thank you Caroline! I’m so glad to hear that!! When I was learning, I had such a hard time finding the info too, it was something everyone just “talked” about!
Your explanation and demonstration of the scant 1/4" seam was brilliant! I had listened and watched other videos on this but none have ever done it as well as you have.Thank you very much!!
I’m relatively new to your channel; and after watching several of your videos, I’m now a subscriber. Your instruction style is so pleasant and easy to follow. You obviously enjoy piecing and making quilts, and your sincerity in sharing the knowledge you’ve gained comes across as genuine and unpretentious. 😊 I totally agree with you on the importance of sewing a scant 1/4” seam and especially how critical it is to test stitch prior to beginning each project. I also own a Juki TL series machine that’s straight stitch only, e.g. doesn’t have the ability to move the needle position to the right or left of center. However, some of your viewers might appreciate you demonstrating this option as another way to easily achieve a scant 1/4” seam. Of course, I’m assuming that you have another such machine available for this purpose! I’m 73 and been sewing and quilting for about 55 years now. I enjoy watching the younger generation of garment sewers and quilters because I remember my early years when I was learning all this for the first time. I have yet to see any new approaches being offered, but I love seeing the enthusiasm and all the beautiful fabric combinations used in the lovely quilts you all make. Thank you for your wonderful videos, Ms. Ledine!
absolutely love your clear, concise, thorough, and no-nonsense way of teaching. You get right to the point and don't waste our time. You also generously share your knowledge and techniques. Very much appreciated!
Very detailed on the scant quarter inch...extreme important. You have nailed the teacing component & have allowed us the viewer to completely understand what is a scan quarter inch. Again big thanks 🇨🇦
I cannot thank you enough for such a good explanation of a scant 1/4" seam! I immediately hit the like button and subscribed. Your method of teaching resonates with me.
I am a very new quilter and I’ve watched hundreds of videos about quilting but have never had anyone explain what a scant quarter inch was. Thanks for the detailed explanation.
Oh my gosh thank you! I'm advanced beginner quilter and I can never master getting all of my blocks to be accurate. This video is so helpful to my growth as a quilter. Thank you!
I actually wrote about that ‘scant 1/4 inch’ on my sewing blog way back in 2014. I couldn’t seem to find any good info on it etc… and even asked a lady at my local sewing store about it. She, who had made many quilts, had no idea what I was talking about. I ended up buying their 1/4” foot for my machine and when I got home I had to laugh because right on the packaging, in small print, it stated that it was also capable of the scant 1/4 inch. My only problem was using it with precut fabric with those darn ‘pinked’ edges. Those pinked points weren’t always consistent, but then neither am I 😂.
Isn't it funny how it seems to be a mystery?? I am in the same boat as you with precuts and the pinked edges. I've always read that you should measure and find where the manufacturer has measured it, either in the "valley" of the cuts or the top tips. I've tried that but it never seems to work out for me that way, maybe I'm too impatient! LOL
An important addition for testing: Measure your sample pieces before and after sample seam. For example 2.5" piece sewn to 2.5" piece minus 1/4" means your finished test should measure at 4.5". That is how I verify my scant is as accurate as I can comfortably make it and that my finished pieces will end up true to size. Without this test, my "scant" can still be too much or too little and multiplied over an entire quilt that still makes quite a difference. Oh and don't be like me and have the beginning of each seam a nice scant 1/4 and by the end I'm over or under because I''m not paying attention! I LOVE your video - clear and straight forward and great closeups:)
Wow!!! I'm a visual learner and a beginner when it comes to quilting. Yours is the first video on scant 1/4 that actually made sense to me!!!! Thank you!!!
I have been watching many videos to learn as much as possible before beginning my very first quilt. Thank you for your quiet,patient and thorough manner in educating!! You give me confidence to begin what I thought was a daunting endeavor!!
I had a magnet like that 40 years ago when I was sewing curtains. I just purchased another and glad to see you suggesting it. My sewing teacher at the time said it was a "crutch". It sure helped me get straight seams on 90" curtain panels
So agree with others comments, Love that you drop the needle before feeding fabric through to stitch; I began doing this and it makes a difference. Am new to quilting but have been sewing for decades and always checked seam allowances for accuracy but your explanations and demonstrations are so reinforcing and encouraging my method of madness. Thank you for sharing your time and talent. Merry Christmas.
I just sent you a comment about 15min. ago asking about your guide, I was scrolling your videos, looking for very easy first time quiting videos, and I found were you explained the type of Magnetic guide you use, also you explained about a scant 1/4" yard, which I thought when I heard it for the first time they were just messing with me because I really don't know what I'm doing. I definitely don't know how to Sew with a Pattern, I just look at something and wing it. I learn by hands on and someone patient enough to show or tell me what to do. Thanks again for your great videos and help.
Bought my sewing machine during the pandemic and decided I would learn how to quilt. I also purchased tons of fabric online some turned out to be excellent quality, while some fabrics seemed like cheesecloth. It has been a journey. Thanks for explaining a scant quarter inch seam, I had it completely wrong.
I loved the visual off you showing the seam on a clear ruler. It made so much more sense. I always thought scans meant that the thread was on the quarter inch line. Your seam is even more scant than what I've been doing. I will have to try it to see if it improves my piecing because I can never make a block to the size of a pattern. I always end up off by a quarter to half an inch sometimes. I know that it adds up the further along in the project you go. Thank you.
Outstanding video. Like other comments I’ve watched many videos looking for help to understand what a “scant” 1/4 inch is. I’m not a quilter but helping a friend with a quilt kit and the instructions speaks about a scant 1/4. Both confused when her blocks didn’t match up. So glad mystery solved. Thank you.
I have sewn blocks together but have not had instruction on this quality of explanation. I want to watch every video you have done. Thank you so much. ❤
Your video is well done. You have clear and concise diction which really makes this video easy to listen to. Your background is well placed and staged. The use of color is pretty to see. No clutter or distracting décor. Your use of close ups was clear (mostly) and easy to watch. The use of the close-up on the ruler was hard to watch; maybe next time get a bit closer to the presser foot; not so close to you. Also, a scant 1/4" seam is a thread "width" smaller than a 1/4" (not a "thread length"). Thanks for the video. I'm looking forward to more.
I did actually figure out the “scant” measurement when garment sewing. It can make a big difference in your finished project. Thanks for bringing it in to the piecing directions :)
I love using a scant 1/4 it always creates better blocks without losing the thread width on multiple pieces. I have two machines and one of them has a foot that gives a perfect scant quarter inch
Thank you thank you! During sewing classes that I have taken I have mentioned how much the fabric and thread used impact our seam and finished project size but most are unaware. I have done a sample with different fabric and thread and I know that fact is true.
Thank you so very much for your video. I am a self taught quilter via RUclips and have always had trouble with the scant 1/4” seam. The close ups really help as well. SIDE NOTE: I would love to see a video on how to accurately cut fabric with close up views. After I initially cut my fabric to create a straight edge, I’m not sure where to place my ruler for my next cut. Say I want to cut a 5” strip by WOF, do I line my fabric up to the outer or inside edge of the 5” line? Or a 6” square or a 6”x7” rectangle etc. Sometimes my cuts are off by a scant or so. To avoid this, I usually verify the placement of my ruler using my tape measure before I make my cut just to make sure I am getting the size of fabric I want which is way too much work. Thanks and Happy Sewing!
Glad you enjoyed the video Shel! That's a great idea for a future video. Cutting yardage can certainly be confusing sometimes, I'll definitely put that on the list for future video ideas! So watch out for it! Thank you!!
Thank you so much! I've been quilting for 30 years and I just love your videos. You have a very calming voice and instruct beautifully. I'm so glad to have found your channel. I'll be watching for more videos. Subscribing now.
Your explanations are so accurate and professional. I have enjoyed several and will find all you have done. Beginners and experienced sewists can learn some new things! Thank you.
I have a mystery quilt to do. It's from a few yrs ago. It's has a 1)4 scant. I got the fabric,had a rough time. Put everything up and actually used most of to doing something else. Now I may try and work on it at some point. Thank you.
Thank you! I have a Juki also and the needle doesn't move, as my quilt instructions suggested. I do have a magnetic seam guide, and I am able to get the scant 1/4 inch just like you showed.
You are so right, the needle position can't be adjusted on several models of Juki (mine included), so this is a great solution to get a scant 1/4" seam!
Thank you for showing this and IT does make a difference with the thread as well I found that out the hard way because I didn’t test first 😳 good video really helpful 👍👍👍
Hi Ledine. My Name is Susan Smith from Texas. I am working on a wall hanging and it called for a Scant 1/4" seam. Your video was very helpful.!!! I have a 1/4" foot for my machine and could not figure out how to make it a scant. Could you tell me where you purchased the Magnetic Guide you use? That sounds exactly what I need. Thank you so much. Susan
I use a little stack of post-it notes taped to my machine. I also have used an old credit card taped to my machine, but no matter what I use as a guide I still measure with a ruler as you to double check the 1/4 “
I am taking a quilting class and my 1/4 seam allowance is always scant, and I am not getting a passing grade at school. Does a pattern say when to use the scant 1/4" , not a full 1/4 " seam? We are not piecing from patterns, lessons with instructions are hand outs from the teacher. Thank you for the thoughtful tutorials.
Thanks for this video. I’d like to ask you about your pink lamp shown in front of the window. I’m looking for a good bright lamp for my quilting station.
I love that you used the ruler to measure after you had sewn what you thought was your scant 1/4”. On a sidenote… binding, when it comes to finding I’m happy to sew on the front with the sewing machine. But I always hand sew the backside. The reason is I’m a perfectionist I don’t like the way it lines up on the front side when I see the backside. Tips or tricks?
I just got a sewing machine and found your channel. I can't wait to dive into your content. Do you use a scant 1/4 inch instead of a 1/4 inch, which is what I would have guessed, to save fabric? Does it have to do with piecing? Thanks for sharing .💗👀 (the link for the white thread is broken. thx.)
Thank you so much and I'm glad to have you here! The advantage to using the scant 1/4" is that because it is accounting for the width of fabric, thread and the pressing of the seams, it should make your blocks the accurate size. So a true 1/4" may be too large (wide) when not accounting for the fibers. Does that make sense? Good luck in your journey!
I am very new at quilting, so new that I am trying to figure out what machine I want to purchase. (If you have a suggestion, I would love to hear it). I love your video’s, you explain everything very clearly and love that you do the close up of your material and everything. I just have one question, when do you use the scant 1/4 seam? Thank you for all your videos.
It’s best to test 1/4” with your fabric and thread first and see how things measure after pressing. I tend to use a scant all the time. With certain techniques it’s a good idea too. But measuring first will save you every time!
When using a scant 1/4" seam, what is your test block suppose to measure? As long as you use the same seam allowance throughout your project, it should allow your piecing to match up, right?
A test block is to measure whether your finished size is accurate or not. Yes using the same seam allowance throughout an entire may not always be a problem, BUT many quilters struggle with consistency as well. So setting yourself up to learn the proper seam allowance is a better approach...in my opinion of course :-)
Hi ! I am a beginner quilter and I never understood the scant 1/4” But , now I do ! Thank you so much ! So this should be used all the time when piecing blocks ?
I'm glad this helped! I now use a scant in all of my piecing but it took me a while to get used to that. If you are setting yourself up with an accurate scant then I would make that your goal. But regularly check to make sure your seams are lining up and that your blocks are the proper size. Then you can adjust accordingly! Hope this helps!
Any kind of piecing should you use a scant 1/4 Inch here my theory I made a bunch of these blocks called Potato chip blocks and I added sashing in between ran into a mess where I had to ripp out the sashing and trim one of the blocks on both sides to get the row to fit at the end very frustrating I only been quilting now for 3 years so in future I'm saying should I go with a scant 1/4 inch to get everything to fit nice especially if I add sashing in between each of my blocks hope you can direct me thanks again for the video
I have a magnetic guide but it says not to use them with digital machines. Also I always wonder why ppl keep on about 1/4 inch seams I literally just line my fabric with the edge of the foot and that's my seam allowance. I'm very very new to quilting and sewing I'm advanced with crochet can even do my own patterns or make items seen just in a picture online and I also advance in card crafting too so sewing was new to me just over a month away I've made baby blankets a double quilt for my daughter a king size quilt for me and hubby and nearly finished a single quilt for my granddaughter's birthday in 2 weeks. I think I'm finally getting the hang of cutting the fabric right as well as really struggled with that to begin with
HI, SUGAR I have several 5" charm blocks. When I find them I will HAPPILY use them. Meanwhile in think I'll use my 2 1/2" strips and give it a Go. Any thoughts folks Ty
You do what you like!! I have PLENTY of 2.5” squares and strips. They are great to sew with too! This just happens to be a way of making 4 patches with charm packs!
Baby Lock presser feet are different than the ones I have here with my Juki, but they have comparable ones, including a 1/4" foot. Just make sure you measure and set yourself up well if you get one!
It’s the standard holder on my machine which is a Juki TL2010Q. I have seen separate stands/holders that you can place next to or behind your machine, good luck!
Well, in my 20 years of piecing quilt tops, you are the first person on RUclips or in a quilt class that I have ever seen clearly define and show with a steady camera up close so that you can clearly see what a scant 1/4 inch actually looks like. Those descriptions you listed are all I have ever heard with no demonstration of it . Thank you, thank you, THANK YOU!!!😊
Many computerised sewing machines advise you not to have magnetic items near them. An alternative way is to use a bright tape as a guide. Great tutorials.
I just found your site, you have taught me so much that I guess I have lost over the years, you teach me how to do some things again, I used to teach, now I donate to churches for the needy. I love paper piecing now, I am 76 and turned my small apartment into my sewing studio, I feel you’re bringing me back. I so thank you for bringing my artistry back.❤
I’m almost finished my long awaited scrap
Quilt plus “passion fabric of wild flowers “ instead of a solid. My much loved scraps have gently followed I’m totes, for about 20 years. I’m happy I did, I had pretty good taste. You’re quite the inspirational person. If I can figure out how to send you a pic, I shall I. Thank you Tiffany!!
I can't tell you how many video's and blogs I've watched and read but still didn't get what they were saying about the scant quarter inch. I'm thrilled to have found you!!! Your video's are clear and easy to understand. Thank you!!!!
Oh thank you Caroline! I’m so glad to hear that!! When I was learning, I had such a hard time finding the info too, it was something everyone just “talked” about!
@@sugarstitchesquiltco exactly! Thank you!
My Juki will not sew with Coats and Clark thread, its Aurafil or nothing. Thank you for the video.
Your explanation and demonstration of the scant 1/4" seam was brilliant! I had listened and watched other videos on this but none have ever done it as well as you have.Thank you very much!!
I’m relatively new to your channel; and after watching several of your videos, I’m now a subscriber. Your instruction style is so pleasant and easy to follow. You obviously enjoy piecing and making quilts, and your sincerity in sharing the knowledge you’ve gained comes across as genuine and unpretentious. 😊
I totally agree with you on the importance of sewing a scant 1/4” seam and especially how critical it is to test stitch prior to beginning each project.
I also own a Juki TL series machine that’s straight stitch only, e.g. doesn’t have the ability to move the needle position to the right or left of center. However, some of your viewers might appreciate you demonstrating this option as another way to easily achieve a scant 1/4” seam. Of course, I’m assuming that you have another such machine available for this purpose!
I’m 73 and been sewing and quilting for about 55 years now. I enjoy watching the younger generation of garment sewers and quilters because I remember my early years when I was learning all this for the first time. I have yet to see any new approaches being offered, but I love seeing the enthusiasm and all the beautiful fabric combinations used in the lovely quilts you all make.
Thank you for your wonderful videos, Ms. Ledine!
Thank you so much. Well done!
Thanks for watching!!
absolutely love your clear, concise, thorough, and no-nonsense way of teaching. You get right to the point and don't waste our time. You also generously share your knowledge and techniques. Very much appreciated!
You're very welcome! Thanks for watching!! Glad to have you here!!
Very detailed on the scant quarter inch...extreme important.
You have nailed the teacing component & have allowed us the viewer to completely understand what is a scan quarter inch. Again big thanks 🇨🇦
That’s great to hear! Thank you!!!
I cannot thank you enough for such a good explanation of a scant 1/4" seam! I immediately hit the like button and subscribed. Your method of teaching resonates with me.
Finally an explanation that truly explains the scant quarter inch.😊
I am a very new quilter and I’ve watched hundreds of videos about quilting but have never had anyone explain what a scant quarter inch was. Thanks for the detailed explanation.
Oh I'm so glad to hear that and I appreciate you watching!
Oh my gosh thank you! I'm advanced beginner quilter and I can never master getting all of my blocks to be accurate. This video is so helpful to my growth as a quilter. Thank you!
I actually wrote about that ‘scant 1/4 inch’ on my sewing blog way back in 2014. I couldn’t seem to find any good info on it etc… and even asked a lady at my local sewing store about it. She, who had made many quilts, had no idea what I was talking about. I ended up buying their 1/4” foot for my machine and when I got home I had to laugh because right on the packaging, in small print, it stated that it was also capable of the scant 1/4 inch. My only problem was using it with precut fabric with those darn ‘pinked’ edges. Those pinked points weren’t always consistent, but then neither am I 😂.
Isn't it funny how it seems to be a mystery?? I am in the same boat as you with precuts and the pinked edges. I've always read that you should measure and find where the manufacturer has measured it, either in the "valley" of the cuts or the top tips. I've tried that but it never seems to work out for me that way, maybe I'm too impatient! LOL
An important addition for testing: Measure your sample pieces before and after sample seam. For example 2.5" piece sewn to 2.5" piece minus 1/4" means your finished test should measure at 4.5". That is how I verify my scant is as accurate as I can comfortably make it and that my finished pieces will end up true to size. Without this test, my "scant" can still be too much or too little and multiplied over an entire quilt that still makes quite a difference. Oh and don't be like me and have the beginning of each seam a nice scant 1/4 and by the end I'm over or under because I''m not paying attention! I LOVE your video - clear and straight forward and great closeups:)
Thanks for the extra tips!! Good luck!
Wow!!! I'm a visual learner and a beginner when it comes to quilting. Yours is the first video on scant 1/4 that actually made sense to me!!!! Thank you!!!
I have been watching many videos to learn as much as possible before beginning my very first quilt. Thank you for your quiet,patient and thorough manner in educating!! You give me confidence to begin what I thought was a daunting endeavor!!
Yes this helped with a scant 1/4 seam, but which seam allowance should I use?
I had a magnet like that 40 years ago when I was sewing curtains. I just purchased another and glad to see you suggesting it. My sewing teacher at the time said it was a "crutch". It sure helped me get straight seams on 90" curtain panels
Some people think that, but oh well! If it helps, that's all that matters! There's no medal for doing it "perfectly" is there? Good luck to you!
So agree with others comments, Love that you drop the needle before feeding fabric through to stitch; I began doing this and it makes a difference. Am new to quilting but have been sewing for decades and always checked seam allowances for accuracy but your explanations and demonstrations are so reinforcing and encouraging my method of madness. Thank you for sharing your time and talent. Merry Christmas.
I just sent you a comment about 15min. ago asking about your guide, I was scrolling your videos, looking for very easy first time quiting videos, and I found were you explained the type of Magnetic guide you use, also you explained about a scant 1/4" yard, which I thought when I heard it for the first time they were just messing with me because I really don't know what I'm doing. I definitely don't know how to Sew with a Pattern, I just look at something and wing it. I learn by hands on and someone patient enough to show or tell me what to do. Thanks again for your great videos and help.
Bought my sewing machine during the pandemic and decided I would learn how to quilt. I also purchased tons of fabric online some turned out to be excellent quality, while some fabrics seemed like cheesecloth. It has been a journey. Thanks for explaining a scant quarter inch seam, I had it completely wrong.
Welcome to the amazing world of quilting!!! You’ll be addicted soon!!! Good luck and thanks for watching!!
I loved the visual off you showing the seam on a clear ruler. It made so much more sense. I always thought scans meant that the thread was on the quarter inch line. Your seam is even more scant than what I've been doing. I will have to try it to see if it improves my piecing because I can never make a block to the size of a pattern. I always end up off by a quarter to half an inch sometimes. I know that it adds up the further along in the project you go. Thank you.
Glad it was helpful! Good luck!!
Now it all makes sense! Thank You!
Now I understand what a scant quarter inch means. Thank you
Thank you for this information. For a beginner quilter this explanation will help me a lot.
Awesome video. You are fantastic. Thank you
So nice of you!! Thanks!!
Thank you so much. I an new to quilting and your videos are great.
You are so welcome! Thank you!!
Outstanding video. Like other comments I’ve watched many videos looking for help to understand what a “scant” 1/4 inch is. I’m not a quilter but helping a friend with a quilt kit and the instructions speaks about a scant 1/4. Both confused when her blocks didn’t match up. So glad mystery solved. Thank you.
So glad to hear!! Thanks for watching (and helping your friend!)
I have sewn blocks together but have not had instruction on this quality of explanation. I want to watch every video you have done. Thank you so much. ❤
I have always had trouble with this. thank you so much. All the close up shots really help
Great to hear! Thanks for watching!
I like your teaching. Sometimes I have a bit of a hard time understanding what is being taught for sewing squares. Thank you !
THANKS! I DID IT!!! I have a Singer 9960 and I used the Seam Guide. When I measured as you showed, it worked perfectly. Thanks a million!
I enjoyed this video as I strive to improve my quilting. Thanks for sharing.😊
Your video is well done. You have clear and concise diction which really makes this video easy to listen to. Your background is well placed and staged. The use of color is pretty to see. No clutter or distracting décor. Your use of close ups was clear (mostly) and easy to watch. The use of the close-up on the ruler was hard to watch; maybe next time get a bit closer to the presser foot; not so close to you. Also, a scant 1/4" seam is a thread "width" smaller than a 1/4" (not a "thread length"). Thanks for the video. I'm looking forward to more.
Thanks for watching and for the tips!
I did actually figure out the “scant” measurement when garment sewing. It can make a big difference in your finished project. Thanks for bringing it in to the piecing directions :)
You’re so welcome! Glad it was helpful!
Great video thank you for the info. I too have been struggle with my 1/4” seams.
Glad it was helpful!
Thank you, Ledine! I appreciate your excellent teaching. I feel a little more confident as a beginner quilter.
That is so wonderful to hear! Thanks for watching!
Great teaching video, Thank you!
Thank you for demystifying the scant 1/4 in seam. Your explanation was very clear!
This is my first time watching your videos they are very helpful I am new to Quilting and I want to learn. i will be following your channel.
Wonderful to hear!! Glad to have you!!
Thank you so much. My block measures a quarter inch less than required. I'll search for my magnetic guide and work it out!!! Bless you ❤
This was super helpful for me! I’m going out today to buy one of these magnetic guides. Thank you!
Great video easy to follow. Now I understand wery well what is a scan !/4" seam. Thankyou very much. Tx/PR😊
Just found your channel today, love your video! Subscribed 🤩🇺🇸
Yay! Thank you!
Super helpful! I’ve come across this several times and it has been very confusing! Thanks for the video!
Do you always sew a scant 1/4 when piecing? ( except for the half square triangles)
Gave you a thumbs up and subscribed. Thank you for this explanation….
Awesome, thank you! So glad to have you!
I love using a scant 1/4 it always creates better blocks without losing the thread width on multiple pieces. I have two machines and one of them has a foot that gives a perfect scant quarter inch
That’s great!
Thanks for a great explanation! ❤
You have easily explained what I find difficult to attain. Maybe now I can learn to use the scant 1/4" Thank you.
That’s great to hear!!! I hope it works well for you!!
Thanks a million! I am just learning and I have been wondering what a scant quarter inch is!!
Thank you thank you! During sewing classes that I have taken I have mentioned how much the fabric and thread used impact our seam and finished project size but most are unaware. I have done a sample with different fabric and thread and I know that fact is true.
Wonderful! I didn't really believe it when I first heard it and then when I started experimenting I was happily surprised to find out it's true!
Thanks so much for this video!
Thank you was very helpful.
Thank you so very much for your video. I am a self taught quilter via RUclips and have always had trouble with the scant 1/4” seam. The close ups really help as well. SIDE NOTE: I would love to see a video on how to accurately cut fabric with close up views. After I initially cut my fabric to create a straight edge, I’m not sure where to place my ruler for my next cut. Say I want to cut a 5” strip by WOF, do I line my fabric up to the outer or inside edge of the 5” line? Or a 6” square or a 6”x7” rectangle etc. Sometimes my cuts are off by a scant or so. To avoid this, I usually verify the placement of my ruler using my tape measure before I make my cut just to make sure I am getting the size of fabric I want which is way too much work. Thanks and Happy Sewing!
Glad you enjoyed the video Shel! That's a great idea for a future video. Cutting yardage can certainly be confusing sometimes, I'll definitely put that on the list for future video ideas! So watch out for it! Thank you!!
Very helpful Ledine!
Thanks!! Appreciate you watching!
Thank you so much! I've been quilting for 30 years and I just love your videos. You have a very calming voice and instruct beautifully. I'm so glad to have found your channel. I'll be watching for more videos. Subscribing now.
I pushed the wrong LIKE button. Lol
Thank you so much Marcy! Glad to have you here!! Would love to learn from you too and all that experience!
Finally… thank you!
This is so helpful! Thanks!
Thank you ☺️ this is very helpful
Your explanation is a relief. Thank you! I’d like to know though when to use the squant 1/4” and when not? That still confuses me …
It sure can be confusing! But a few times of your blocks not coming out the right size and then a scant might be the answer!
Your explanations are so accurate and professional. I have enjoyed several and will find all you have done. Beginners and experienced sewists can learn some new things! Thank you.
I have a mystery quilt to do. It's from a few yrs ago. It's has a 1)4 scant. I got the fabric,had a rough time. Put everything up and actually used most of to doing something else. Now I may try and work on it at some point. Thank you.
Sounds great! Good luck! You can do it!
Thank you!
You’re so welcome! Thanks for watching!
THANK YOU 🥰🤗
You’re welcome 😊
Wonderful videos, you’re a great teacher
Thank you very much!
Your video is very helpful, thanks
Glad it was helpful!
Great to know! Thank you.
Glad it was helpful!
Yes I sew with a scant quarter
I can't do without it!
Thank you! I have a Juki also and the needle doesn't move, as my quilt instructions suggested. I do have a magnetic seam guide, and I am able to get the scant 1/4 inch just like you showed.
You are so right, the needle position can't be adjusted on several models of Juki (mine included), so this is a great solution to get a scant 1/4" seam!
Very glad I found you. Your instructions are very clear and along with the video it’s a bonus😊
Well I'm glad you are here!! Thanks for watching!
Thank you for showing this and IT does make a difference with the thread as well I found that out the hard way because I didn’t test first 😳 good video really helpful 👍👍👍
It really does! I wish I had a microscope lens to show it better LOL Glad it was helpful!
Hi Ledine. My Name is Susan Smith from Texas. I am working on a wall hanging and it called for a Scant 1/4" seam. Your video was very helpful.!!!
I have a 1/4" foot for my machine and could not figure out how to make it a scant.
Could you tell me where you purchased the Magnetic Guide you use? That sounds exactly what I need. Thank you so much. Susan
I use 1/4” mark on the machine but I move the needle to right one time.
That’s a good tip!!
I use a little stack of post-it notes taped to my machine. I also have used an old credit card taped to my machine, but no matter what I use as a guide I still measure with a ruler as you to double check the 1/4 “
I’ve heard of that as well! Great idea!!
Thanks for the information. 🙌
You bet!
I am taking a quilting class and my 1/4 seam allowance is always scant, and I am not getting a passing grade at school. Does a pattern say when to use the scant 1/4" , not a full 1/4 " seam? We are not piecing from patterns, lessons with instructions
are hand outs from the teacher. Thank you for the thoughtful tutorials.
Thanks for this video. I’d like to ask you about your pink lamp shown in front of the window. I’m looking for a good bright lamp for my quilting station.
I love that you used the ruler to measure after you had sewn what you thought was your scant 1/4”.
On a sidenote… binding, when it comes to finding I’m happy to sew on the front with the sewing machine. But I always hand sew the backside. The reason is I’m a perfectionist I don’t like the way it lines up on the front side when I see the backside. Tips or tricks?
Thanks for watching Cheryl! I have a whole binding series coming very soon!
It also makes a difference in the weight of the thread you use to piece
It sure does!
I will tried this thank you
Welcome 😊 good luck!
I just got a sewing machine and found your channel. I can't wait to dive into your content. Do you use a scant 1/4 inch instead of a 1/4 inch, which is what I would have guessed, to save fabric? Does it have to do with piecing? Thanks for sharing .💗👀 (the link for the white thread is broken. thx.)
Thank you so much and I'm glad to have you here! The advantage to using the scant 1/4" is that because it is accounting for the width of fabric, thread and the pressing of the seams, it should make your blocks the accurate size. So a true 1/4" may be too large (wide) when not accounting for the fibers. Does that make sense? Good luck in your journey!
@@sugarstitchesquiltco Thank you!!
Can you please tell me where to get that magnetic guide for my Juki? Thank you!
The link is in the description! Good luck!
I am very new at quilting, so new that I am trying to figure out what machine I want to purchase. (If you have a suggestion, I would love to hear it). I love your video’s, you explain everything very clearly and love that you do the close up of your material and everything. I just have one question, when do you use the scant 1/4 seam? Thank you for all your videos.
It’s best to test 1/4” with your fabric and thread first and see how things measure after pressing. I tend to use a scant all the time. With certain techniques it’s a good idea too. But measuring first will save you every time!
When using a scant 1/4" seam, what is your test block suppose to measure? As long as you use the same seam allowance throughout your project, it should allow your piecing to match up, right?
A test block is to measure whether your finished size is accurate or not. Yes using the same seam allowance throughout an entire may not always be a problem, BUT many quilters struggle with consistency as well. So setting yourself up to learn the proper seam allowance is a better approach...in my opinion of course :-)
I loooove all your closeups. 👍
I'm so glad to hear that. Thank you!
Hi ! I am a beginner quilter and I never understood the scant 1/4” But , now I do ! Thank you so much ! So this should be used all the time when piecing blocks ?
I'm glad this helped! I now use a scant in all of my piecing but it took me a while to get used to that. If you are setting yourself up with an accurate scant then I would make that your goal. But regularly check to make sure your seams are lining up and that your blocks are the proper size. Then you can adjust accordingly! Hope this helps!
I'm going to look into the Aurafil 50wt. I use a scant 1/4" now, but it's not helping, but my thread is 40wt.
Any kind of piecing should you use a scant 1/4 Inch here my theory I made a bunch of these blocks called Potato chip blocks and I added sashing in between ran into a mess where I had to ripp out the sashing and trim one of the blocks on both sides to get the row to fit at the end very frustrating I only been quilting now for 3 years so in future I'm saying should I go with a scant 1/4 inch to get everything to fit nice especially if I add sashing in between each of my blocks hope you can direct me thanks again for the video
New quilter here. So, does that mean all quilters or most of them always sew with a scant quarter inch and not an actual quarter inch?
I have a magnetic guide but it says not to use them with digital machines.
Also I always wonder why ppl keep on about 1/4 inch seams I literally just line my fabric with the edge of the foot and that's my seam allowance. I'm very very new to quilting and sewing I'm advanced with crochet can even do my own patterns or make items seen just in a picture online and I also advance in card crafting too so sewing was new to me just over a month away I've made baby blankets a double quilt for my daughter a king size quilt for me and hubby and nearly finished a single quilt for my granddaughter's birthday in 2 weeks. I think I'm finally getting the hang of cutting the fabric right as well as really struggled with that to begin with
HI, SUGAR
I have several 5" charm blocks.
When I find them I will HAPPILY use them. Meanwhile in think I'll use my 2 1/2" strips and give it a Go. Any thoughts folks
Ty
You do what you like!! I have PLENTY of 2.5” squares and strips. They are great to sew with too! This just happens to be a way of making 4 patches with charm packs!
@@sugarstitchesquiltco Found the BOX with the Charm Packs. Whoopie. Doing well with my Progress. TYVM
Is that aurafil in both top and bobbin ?
It's important to use the same thread in your bobbin and spool.👍💪
Would moving your needle to the right also make a scant seam?
I press to the side…is a scant quarter inch helpful for me as well? Or is it mainly helpful for those who press their seams open?
A scant can be used with any pressing direction! Good luck!
@@sugarstitchesquiltco oh thank you!
A scant 1/4” is a 1/16”. Working as a text designer with printers measurements had to be accurate, even to 1/32”.
Wouldn't a scant 1/4 inch be 3/16?
@@joantinker1693yes!
3/16, NOT 1/16😊
Do you backtac when you sell them
I typically don't when I'm sewing individual blocks, only when I'm sewing my rows and columns together :-) Thanks for watching!
Is this work with frying geese block?
I have a Baby-Lok and do not have that type of foot
Baby Lock presser feet are different than the ones I have here with my Juki, but they have comparable ones, including a 1/4" foot. Just make sure you measure and set yourself up well if you get one!
Can you tell me the name of the thread spool holder you have in your scant 1/4 inch video. I want a thread holder for cone of thread.
It’s the standard holder on my machine which is a Juki TL2010Q. I have seen separate stands/holders that you can place next to or behind your machine, good luck!