Better simple bracket is using Spring Steel banding straps... there's free scraps to be found at your local lumber yard... more ductile... and come in various widths. Heavier but barely.
I've used several of these methods on my trucks over the years. My last one, the Axial G6, I used some neodymium magnets I got off the E-bay. Shoe goo'd 4 under the lexan and 4 on top of the body posts. holds pretty tight, until side loaded.
Ya, that's what I thought !!! - Thankyou for your input, I am trying to decide which mounting system to use !!!? - I probably will use the magnent style mounting approach !! 🤔..... ??? Or the velcro style, cuz I won't need a whole lot of "hold" for my light weight JEEP CREEP BODY !! 😁 It's going on a GMADE (GS02F) CHASSIS !!! - OH YA !!!! 👍😜🤘😎 My GMADE (GS02F) "IS" THE BEST AVAILABLE, (STOCK) RC CRAWLER, IN THE WORLD !!!! .....SO FAR... CHECK IT OUT ON THE "ADVENTURE RC" CHANNEL !!! AND YOU WILL SEE WHY IT IS THE BEST PERFORMING (STOCK) CRAWLER, OUT OF THE BOX !!!! - PERIOD. 💪 GMADE "ROCKS", NOW THAT THEY CAME OUT WITH THIS NEW RC CRAWLER BACK IN DECEMBER 2020 !!!! 🏁 [#☝️] IN THE WORLD !!!!! 🤘
A lot of great ideas for sure. I was really hoping to see how you guys came up with mounting the jeep Cherokee hard especially when the 2 front locations can't be used after the hood is cut open.
smart.. ive been using velcro on my new bright cause the body needs to come off pretty often, but the brackets seem like the way to go if your willing to take some time taking it on and off
Hi, we could use some sort of locating pin with the velcro if the body is not aligning every time, just a thought. And thanks for your great efforts in showing your tips. You go to length in detail and camera work brother. :-)
They do work well. I purchased a gen 8 pack and in the process of a custom build for a trail truck. Works well. Magnets was tough didn't sit low enough for magnets to contact. Using brackets with a rear hinge system works well.
WHY didn't I watch this BEFORE drilling holes in my Landfreeder body!!!???? 😲 Well, I'm glad I've also got a Vaterra 67 Ford F100 body. I'm trying #5 for SURE! Thank you
Carmine Allocca - Because you didn't know this yet! 😜😜 It's all good brother. At this time, you and I have started our first "real Scaler Rig" projects!! Hopefully, someone will step up soon, to help you guys get out of this mess. There's even a couple of RC'ers who've made videos, asking their subs to donate a little money, to help your family get back on your feet again! Some people here are GREAT! Murph
yup i used 2 simple brakets to mount a hilux body to my scx10 thay work for the new bright mud slinger body that i have customized thay duble as rock sliders
Nice vid man i got a ? Thats been drivein me nuts on my boomracing d110 with the team raffee bidy i got severl lights and when i take the body off the wires cuz problems uk do u have any idias on how to disconnect the lights easer lol tu
Ive been doing this for a while now and never thought of the clips underneath. Great ideas! Thank you for sharing all these.
Thanks for the comments!
great simple body mount ideas on some v-nice trucks
This is cool. I'll be watching more of your videos.
Awesome! Thanks for the different ideas!!
Better simple bracket is using Spring Steel banding straps... there's free scraps to be found at your local lumber yard... more ductile... and come in various widths. Heavier but barely.
I've used several of these methods on my trucks over the years. My last one, the Axial G6, I used some neodymium magnets I got off the E-bay. Shoe goo'd 4 under the lexan and 4 on top of the body posts. holds pretty tight, until side loaded.
That's a great addition! Using the magnets does work very well!
Thanks!
Ya, that's what I thought !!!
- Thankyou for your input, I am trying to decide which mounting system to use !!!?
- I probably will use the magnent style mounting approach !! 🤔..... ???
Or the velcro style, cuz I won't need a whole lot of "hold" for my light weight JEEP CREEP BODY !! 😁
It's going on a GMADE (GS02F) CHASSIS !!!
- OH YA !!!! 👍😜🤘😎
My GMADE (GS02F) "IS" THE BEST AVAILABLE, (STOCK) RC CRAWLER, IN THE WORLD !!!! .....SO FAR...
CHECK IT OUT ON THE "ADVENTURE RC" CHANNEL !!! AND YOU WILL SEE WHY IT IS THE BEST PERFORMING (STOCK) CRAWLER, OUT OF THE BOX !!!! - PERIOD.
💪 GMADE "ROCKS",
NOW THAT THEY CAME OUT WITH THIS NEW RC CRAWLER BACK IN DECEMBER 2020 !!!! 🏁
[#☝️] IN THE WORLD !!!!! 🤘
Great video, thx for the tips.
Nice video, very informative
Glad it was helpful!
A lot of great ideas for sure. I was really hoping to see how you guys came up with mounting the jeep Cherokee hard especially when the 2 front locations can't be used after the hood is cut open.
We have a full mount setup for CMAX and SCX already, and you can open the XJ hood. Yes.
@@GCMRacing1 you guys sell a mounting kit for an xj hard body for the scx10.2?
smart.. ive been using velcro on my new bright cause the body needs to come off pretty often, but the brackets seem like the way to go if your willing to take some time taking it on and off
Great ideas. Thanks.
Hi, we could use some sort of locating pin with the velcro if the body is not aligning every time, just a thought. And thanks for your great efforts in showing your tips. You go to length in detail and camera work brother. :-)
Pins yeah! That's a good idea also.. to get it centered, and then have the velcro hold it down. Yeah.
- "Greatest Idea" in this comment section, at least it is new to me !! - I have never heard of it before !! 🤔...!???
- Thankyou sooo much !!!!👍
I put a vaterra blazer body on my scx10 using bent aluminum post, then velcro works nice
this gets the brain juices going for sure!
Great! Happy trucking!
Neodymium magnets work well too.
They do work well. I purchased a gen 8 pack and in the process of a custom build for a trail truck. Works well. Magnets was tough didn't sit low enough for magnets to contact. Using brackets with a rear hinge system works well.
What kind of tires are you running on the blue ford?
WHY didn't I watch this BEFORE drilling holes in my Landfreeder body!!!???? 😲
Well, I'm glad I've also got a Vaterra 67 Ford F100 body. I'm trying #5 for SURE! Thank you
Carmine Allocca - Because you didn't know this yet! 😜😜
It's all good brother. At this time, you and I have started our first "real Scaler Rig" projects!!
Hopefully, someone will step up soon, to help you guys get out of this mess. There's even a couple of RC'ers who've made videos, asking their subs to donate a little money, to help your family get back on your feet again! Some people here are GREAT!
Murph
yup i used 2 simple brakets to mount a hilux body to my scx10 thay work for the new bright mud slinger body that i have customized thay duble as rock sliders
GCMRacing1 where do you get all of your custom body's for the SCX10
Great video. Do you build chassis?
Yes sir, gcmracing.ca
How did you mount the accessories in the bed
nice tricks i use velcro
well with hard body and pickups its easy.what about the vaterra blazer body?
I would add some styrene features into a lexan body and use many of the same tricks. Glue in posts, or slots for clips etc.
Did you guys build the chassis of that blue Ford pick up truck?
We did build that chassis yes, we have many new chassis now at gcmracing.ca
Plus one: Scaler 44. I was going to ask the exact same question. I really want a jeep hardbody. Hard to find
+Josh Graziosi great hobbies canada, rc mart, and ebay.
+GCMRacing1 - Scale Truck RC in Canada
...Great, Thanks for the info!
Nice vid man i got a ? Thats been drivein me nuts on my boomracing d110 with the team raffee bidy i got severl lights and when i take the body off the wires cuz problems uk do u have any idias on how to disconnect the lights easer lol tu
Yes. Wire it all through a 6s lipo balance plug. One end on the cabin, one end on the frame, single plug.
im a beginner in the scale rc world and im sorry but i don't know the scx10 body post mod could u show me pleases
Very nice👌🙏
Thank you! Cheers!
+GCMRacing1 I didn't see any on the two website could you give me a link for a 4 door jeep hardbody
+Scaler 44 google newbright 1/8 jeep hard body and you will find them.
8:04. Bwahahaha, I nearly fell off my chair.
Ola amigo quantos mm te o amortecedor traseiro e dianteiro do jeep rubicon vermelho por favor?
Nice tip
Thanks !
So I'm gonna pay close to $200 for a 4 door jeep
This is cool. I'll be watching more of your videos.