@@Megachad You are correct, most helmets are painted in the recertification and reconditioning process. This procedure must be done by a NAERA/NOCSAE license.
@@Megachad It will also void the warranty Evidence of any of the following conditions will operate to void this warranty: Failure to have the helmet reconditioned at least every two (2) years by a NOCSAE Licensed Reconditioner. Installation of used parts instead of new parts whenever a liner replacement is necessary. Where shells have been damaged by a chemical reaction from the use of incompatible materials such as: Attachment of a guard, face mask or component of another manufacturer or mismatched material. Use of cleaners, waxes or paints of another manufacturer or failure to follow recommended cleaning and painting instructions. Excessive drilling of holes or drilling of any new holes less than 1⁄2” from each other or the edge of the shell. Abusive treatments or any use other than the playing of American football. Removal of, or obliteration of, the Warranty label, date code or warning labels. Varsity and youth football helmet component parts are warranted to be free of defects in material and workmanship for a period of one (1) year provided there has been normal use and proper maintenance. This warranty is in lieu of all other warranties, expressed or implied, whether Statutory or otherwise, including any implied warranties of merchantability or fitness for any particular purpose. Manufacturer shall not be liable for any consequential damages resulting from the use of its products. Products covered by these warranties should be returned to the manufacturer, along with evidence of the date of purchase. For more information on the reconditioning process, please visit NOCSAE or NAERA.
@@Megachad You do good work! But the BS is correct. Sort of like inspecting your car with out a license, the work may be correct… but its really not inspected.
I bought a new schutt f7 helmet a few weeks ago, and I need to paint it from gloss white to gloss scarlet because I just transferred schools, would I need to sand it because it's brand new or can I just go straight into painting it?
you need to scuff it for sure.. I would use a brillo pad. Your parents might have one laying around or you can have them get you one super cheap. Take time scuffing it up really good and then clean it off really well with paint thinner or a paint prepare spray. That helps get all the little dust off, but also helps the paint stick. Good luck bud!!
@@davidvoorhies812 i appreciate it.. I just don't want to get you the wrong stuff for the helmet you have. And I went to my local auto body shop. Not online.
I have a matte black speed flex rn and it has some scratches on it but I want to make it glossy white, will it come out afterwards as clean as yours did and what’s the exact process?
Any chance you could put up a specific list of what produce you use ? I sprayed my helmet with gloss white and it looked Matt also what are the steps so I don’t mess it up
Chad would you be willing to paint 2 white helmets and make them scarlet red? I will pay for all materials, your time and all freight. Thanks in advance.
I appreciate that you would trust me with your helmet. What I recommend is talking with a local body shop or highschool and seeing where they have their helmets painted.. im sure someone could do it locally for a lot less time and $$
Best thing to do is prep really good. Sand well, clean it off well and if you use an automotive paint from an auto paint supply store that is usually the strongest paint..
Just a brillo pad to scuff the helmet, the paint color you want in an acrylic enamel, and some paint thinner to clean the helmet up right before you paint it. just lightly rub the helmet with a cloth that won't leave a bunch of fuzzies on the helmet with some paint thinner on the cloth to clean the helmet really well, then wait for it to dry off and paint.
@@siahwackem i just did a full repaint on a brand new vicis.. it turned out excellent watch the vid it may help if you haven't painted your helmet already.
depending on paint, it takes about 1 week to cure and harden. if you can bake it in the sun for a couple hours and then put it in the house or garage it will cure and harden faster.
i actually used some paint thinner and cleaned it up after sanding that way, then painted it.. I usually use something called paint prep, but I had ran out. Paint thinner works great for something like this. Just make sure it dries all the way before throwing paint down.
helmets get painted all the time. I would say no. Especially since the most important part of the protection comes from inside the helmet in the padding. but there is a possibility it could. I am not an engineer.
@@Megachad Well, I was just thinking about my motorcycle and bicycle helmets. There was always a warning against painting them. But maybe football helmets are different since they're not DOT or MSF regulated.
@@Megachad I've been sanding doing a base coat wet sand final coat but still seeing some swirls was wondering if primer first would help that or maybe wet sand after I'm done sanding?
@@lifewitmeer6837 i used a primer that helps paint stick and it also helps fill in light sanding marks... probably shouldn't have used it honestly.. I also used a paint thinner to just clean the surface from dust or debris.
@@theuniversalathlete5247 Bro, done it for years without any problems.. also, paint isn't oil based anymore,, it's water based. So paint doesn't ruin or deteriorate plastic like it used to.
Rn I have a gloss navy blue speed flex . I need to turn into a matte navy blue speed flex . Any ideas where I can get it done at ? What’s the materials I need to make it look polish and new ?
You would have to get a matte spray color.. They don't turn out as well as gloss that you already have.. Are the coaches making you change it or do you just want to change it. I don't think they really care if it is gloss as long as it is the right color.. Matte colors are more expensive and harder to make it look right.
MEGACHAD the coaches are making me change it . My helmet is a darker blue bc it’s gloss. Do you think it’s possible I can paint my navy blue helmet white , and then repaint it with a matte navy blue cover. Or is that doing too much . Do you think the matte wouldn’t come out good at all bc it’s kind of the same color?
Yes. I would recommend a brillo pad more than sand paper even. Scuff it up good, clean it off with paint thinner. Let the paint thinner dry off then spray away.. If you can get an acrylic paint.
@@barryN69 it shouldn't if you prep the helmet properly. So just like he did in the video... Sand (or use a brillo pad), then clean up with paint thinner and let it dry completely, then paint it with primer and let it dry completely. Once the primer is completely dry you can paint it with your color of choice. Remember to use short bursts to avoid over spraying an area and having it look sloppy and uneven.
who else needs this bc they transferred 😭
This will decertify the helmet. It could not be used in games.
You are way wrong bro.. helmets get repainted by nfl, universities, highschools ever year.
@@Megachad You are correct, most helmets are painted in the recertification and reconditioning process. This procedure must be done by a NAERA/NOCSAE license.
@@Megachad It will also void the warranty
Evidence of any of the following conditions will operate to void this warranty:
Failure to have the helmet reconditioned at least every two (2) years by a NOCSAE Licensed Reconditioner.
Installation of used parts instead of new parts whenever a liner replacement is necessary.
Where shells have been damaged by a chemical reaction from the use of incompatible materials such as:
Attachment of a guard, face mask or component of another manufacturer or mismatched material.
Use of cleaners, waxes or paints of another manufacturer or failure to follow recommended cleaning and painting instructions.
Excessive drilling of holes or drilling of any new holes less than 1⁄2” from each other or the edge of the shell. Abusive treatments or any use other than the playing of American football.
Removal of, or obliteration of, the Warranty label, date code or warning labels.
Varsity and youth football helmet component parts are warranted to be free of defects in material and workmanship for a period of one (1) year provided there has been normal use and proper maintenance. This warranty is in lieu of all other warranties, expressed or implied, whether Statutory or otherwise, including any implied warranties of merchantability or fitness for any particular purpose. Manufacturer shall not be liable for any consequential damages resulting from the use of its products. Products covered by these warranties should be returned to the manufacturer, along with evidence of the date of purchase.
For more information on the reconditioning process, please visit NOCSAE or NAERA.
@@tonybeam93 That's all B.S. However do whatever you feel is necessary..
@@Megachad You do good work! But the BS is correct. Sort of like inspecting your car with out a license, the work may be correct… but its really not inspected.
I bought a new schutt f7 helmet a few weeks ago, and I need to paint it from gloss white to gloss scarlet because I just transferred schools, would I need to sand it because it's brand new or can I just go straight into painting it?
you need to scuff it for sure.. I would use a brillo pad. Your parents might have one laying around or you can have them get you one super cheap. Take time scuffing it up really good and then clean it off really well with paint thinner or a paint prepare spray. That helps get all the little dust off, but also helps the paint stick. Good luck bud!!
How did it turn out?
Will you link all the paints, primers, sand papers, etc. that you use? Was hard to see from the video.
go to an autobody paint supply store.. take your helmet.. show them what you are painting. they will get you everything you need.
@@Megachad Thanks. Just figured I'd use your affiliate links if you had them to help with the channel.
@@davidvoorhies812 i appreciate it.. I just don't want to get you the wrong stuff for the helmet you have. And I went to my local auto body shop. Not online.
Really appreciate this video need to do this to my helmet
How long it took to dry
I need my helmet the color of your old helmet😂
how did you remove the warning sticker? and the production date? is it easy to put back on?
you can tape around it, or heat it up really good with a blow dryer and peel it off. it isn't going back on.
I have a matte black speed flex rn and it has some scratches on it but I want to make it glossy white, will it come out afterwards as clean as yours did and what’s the exact process?
Watch the whole video start to finish. I think that shows the process. Yes matte black to white will work just fine.
man, i wish i could pay you to do mine 😭
i’ll do it for you i just did mines today 💀
@@nehemiahlowery5843 what paint can you use for a Riddell revo speed?
@@Fento999 you can use any type of spray paint i just got a generic one i found at walmart
Any chance you could put up a specific list of what produce you use ? I sprayed my helmet with gloss white and it looked Matt also what are the steps so I don’t mess it up
I am repainting my sons helmet again today for the new season. I'll try and go over it even better this time. Should be posting video tonight.
@@Megachad omg you life saver
How did you keep the paint out of the 5 holes that inflate/deflate the inside pads?
I pulled the pads out
@@Megachad thanks!
My son got a sppedflex for christmas rhats grey. We need to paint royal blue glossy. Can i use any primer? What would you suggest.
I wouldn't use primer. I would just scuff it up really well with a 400 grit sand paper and paint it with the color myself.
i subscribed just cause this video a plug
thank you
I have a matte black speedflex but transferred and need it to be matte purple. Would I do the same steps or add anything else? Thank you
Just same steps.. take apart, sand down/scuff up really good with brillow pad, clean, paint.
How long does it take it to dry
let it sit for a day a couple days before use
What color was that in the video before you painted in white? The darker color?
matte blue
Chad would you be willing to paint 2 white helmets and make them scarlet red? I will pay for all materials, your time and all freight. Thanks in advance.
I appreciate that you would trust me with your helmet. What I recommend is talking with a local body shop or highschool and seeing where they have their helmets painted.. im sure someone could do it locally for a lot less time and $$
So just sandpaper, alcohol , paint thinner and acrylic enamel?
pretty much!
I recently got a metalic white speedflex j have to paint it Matte black what do I need ?
i have it pretty detailed out in the vid
If you live in Europe what grit level would you recommend for sandpaper. I dont think Brillo is here.
I have a glossy white speedflex and I want to paint it matte black how many coats do I need
probably 3-4
did the paint peel off? or like not stick on
I’m trying to paint mine Matt black what would I need
Just the brillo/scotchbrite pad, paint, and some sort of paint prep cleaner to clean helmet just before painting. I used paint thinner for that.
Can I send you mine to paint?
What brand is the white paint ?
What grit of paper did you use???
400-800 is good. anything smaller will leave a ton of scratch marks on the helmet.
If I have a matte black schutt f7 do I still need to sand it?
yes
Thank you 😊
did u just use straight up spray paint after the primer
YES
Sir what kind of white is that matte or metallic?
gloss
@@Megachad sir after it dryed it did it stay shiny just the paint it self or you made it look shinny
@@jnhjordan6133 hi gloss stays shinny
@@Megachad and sir what the name of can spray pain because I did not hear it
@@jnhjordan6133 You can use Krylon Acrylic Enamel.
Thank you so much!
you are welcome
i had to paint a helmet of mine what do i do to keep the paint from chipping
Best thing to do is prep really good. Sand well, clean it off well and if you use an automotive paint from an auto paint supply store that is usually the strongest paint..
If the helmet is as old as you say, it should be professionally reconditioned
it was 2 seasons old.. it is no longer being used. we are onto a vicis.
OK, I apologize. I thought you said in the video is much older. I’m getting older so maybe my hearing is not so great ha ha
Can you link the products you used because I need to paint mine
Just a brillo pad to scuff the helmet, the paint color you want in an acrylic enamel, and some paint thinner to clean the helmet up right before you paint it. just lightly rub the helmet with a cloth that won't leave a bunch of fuzzies on the helmet with some paint thinner on the cloth to clean the helmet really well, then wait for it to dry off and paint.
Do I need to sand my helmet before painting it even tho it’s white?
yes. always sand it down first.
gloss white spraypaint?
if you are looking for a gloss white yes.. try to get an acrylic enamel
Will a heat gun help dry the helmet faster
I’m abt to order a metallic white f7 I need to spray paint it metallic grey so I sand paper it or no?
you must scuff it up well. . why not order the color you need???
@@Megachad Because it’s out of stock I checked everywhere
@@siahwackem thats a bummer..
@@Megachad Ik I’ve been looking everywhere
@@siahwackem i just did a full repaint on a brand new vicis.. it turned out excellent watch the vid it may help if you haven't painted your helmet already.
Would a clear coat make the paint last longer?
not necessarily.. if you are usuing a single coat paint then no. if you are using a full blown auto 3 stage paint then yes..
How did you make that little swivel stand the helmet was on?
it was just a 5lb sledge hammer upside down.
How many hours do you leave it to dry for?
depending on paint, it takes about 1 week to cure and harden. if you can bake it in the sun for a couple hours and then put it in the house or garage it will cure and harden faster.
I need to paint the same type of helmet white but it’s originally red. What type of paint prep did you use?
i actually used some paint thinner and cleaned it up after sanding that way, then painted it.. I usually use something called paint prep, but I had ran out. Paint thinner works great for something like this. Just make sure it dries all the way before throwing paint down.
MEGACHAD ok, so you sanded it first then used the paint thinner? Or you used the paint thinner first then sanded
@@marsaliscarter6718 Sanded first, then light paint thinner to just clean all the stuff off so the paint will stick really well.
This wouldn't compromise the protection value of the helmet, would it?
helmets get painted all the time. I would say no. Especially since the most important part of the protection comes from inside the helmet in the padding. but there is a possibility it could. I am not an engineer.
@@Megachad Well, I was just thinking about my motorcycle and bicycle helmets. There was always a warning against painting them. But maybe football helmets are different since they're not DOT or MSF regulated.
@@Fletchman1313 Football helmets are Nocsae so maybe.
@@Megachad Well, in any case, thanks for the video.
How long do you let the primer coat dry usually ?
10-15min
@@Megachad I've been sanding doing a base coat wet sand final coat but still seeing some swirls was wondering if primer first would help that or maybe wet sand after I'm done sanding?
@@o2cmycbr2005 what grit are you using.. should be very fine grit.. also swirls aren't something i would worry about on a helmet.
@@Megachad 220 then 320
What is the spray paint called ?
just any acrylic enamel spray paint is ok really. it's the prep that is the most important thing
MEGACHAD whats the stuff your sprayed before you put the actual paint on ?
@@lifewitmeer6837 i used a primer that helps paint stick and it also helps fill in light sanding marks... probably shouldn't have used it honestly.. I also used a paint thinner to just clean the surface from dust or debris.
How many coats did it take to get the gloss finish? I've used 3 coats on mine so far and it's still a matte finish
Depends on the paint. If you have matte paint it will be. You need a hi gloss paint.
Certain paints will degrade the shell due to chemical reactions in the helmet shell I wouldn't advise this as it could cause the shell to crack
all football programs paint their helmets often. colleges, highschools.. it's a normal thing.
@@Megachad at Noscae reconditioning companies
@@theuniversalathlete5247 Bro, go troll someone else.
@@Megachad bro do you even know what your talking about you're not suppose to spray paint helmets google it if you don't believe me
@@theuniversalathlete5247 Bro, done it for years without any problems.. also, paint isn't oil based anymore,, it's water based. So paint doesn't ruin or deteriorate plastic like it used to.
Rn I have a gloss navy blue speed flex . I need to turn into a matte navy blue speed flex . Any ideas where I can get it done at ? What’s the materials I need to make it look polish and new ?
You would have to get a matte spray color.. They don't turn out as well as gloss that you already have.. Are the coaches making you change it or do you just want to change it. I don't think they really care if it is gloss as long as it is the right color.. Matte colors are more expensive and harder to make it look right.
MEGACHAD the coaches are making me change it . My helmet is a darker blue bc it’s gloss. Do you think it’s possible I can paint my navy blue helmet white , and then repaint it with a matte navy blue cover. Or is that doing too much . Do you think the matte wouldn’t come out good at all bc it’s kind of the same color?
@@jamarworthy4065 i think the matte will come through ok. you'll have to try it.. i don't think you;ll have to paint white first.
are sand paper, paint thinner, and hi gloss paint the only components I need?
Yes. I would recommend a brillo pad more than sand paper even. Scuff it up good, clean it off with paint thinner. Let the paint thinner dry off then spray away.. If you can get an acrylic paint.
Wouldn’t the helmet show the scuff marks when you repaint it ?
@@barryN69 it shouldn't if you prep the helmet properly. So just like he did in the video... Sand (or use a brillo pad), then clean up with paint thinner and let it dry completely, then paint it with primer and let it dry completely. Once the primer is completely dry you can paint it with your color of choice. Remember to use short bursts to avoid over spraying an area and having it look sloppy and uneven.