Whats the reason you want to get over 100%? I know it's overcapping but what happens when you reach 100% that you don't get at 99%. Also, do you get anything for going over 100%?
General info for newer players: I deleted the previous comment and post it as a single comment again. I see it way to often, that people are wondering about why their reflect gets disabled. You have to upgrade your reflect to chaos eight with a tenacity 10/10 on it for it to work :D Also check that your tenacity 10 mod tells you "100" percent negative status effects reduction. Cause you can also move a lower chaos tier mod to a higher chaos tier relic but the mod wont upgrade then. So for example you would have a campaign or chaos 1-7 mod quality on your chaos eight reflect. You always have to up the mod to the same chaos tier first and then move it to the relic where you want to have it. For example move a chaos 7 10/10 tenacity to your chaos 7 reflect relic and then upgrade it to chaos eight so the mod also gets upgraded to chaos eight and should show you 100 percent. So just check if it tells you 100 percent :) If thats the case then it should work even when your reflect sometimes seems disabled, cause that sometimes happens due to a visual bug. But it still works even when you see that the reflect is disabled. You can also tell if it works, when your proton or other defences behind it are still working, cause then youre tenacity on reflect does its job :)
I have followed this setup and its really strong but one problem i have is flyers, anyone have any answers on what i can do better? maybe my placements are off or it can be something else?
Thanks man! I just started playing again today after a long time and saw people using reflectors and proton beams and I was thinking, did they change that much? Reflectors for dmg? But after watching this video I understand it, time to get this setup
Juice is the Diverse Power Servo on the Boost not hitting the Reflect Beams now that there are two different Beams. ? Are they still considered unique? Thanks
The only reason you overcap the defense rate om protons is to uply poison when frost orcs come out? Im fairly new to the game and did floor 363 without having any defense rate on the proton. Not even a shard. Just had a garbage posion servo. Thanks in advance for explaining
You can put a reflect beam around the core, and wyverns and zappers wont be able to hit it (most of the time). The regular kamikaze's can be completly ignored, and for emp kobolts, I would use a bait tower for them to dive into, best would be frostbite tower or obelisk
i usually like to have a separate flame aura just for flyers. But i also have 2 skyguards setup in case i wanna use 1 for dps or both for some petrifying. I just obliterate them because I don't want to take a chance on my core with reflect beams since the AI is... odd lol.
@@MrJuicebags Does the "Torpedo Striker" shard from Chaos 8 give the same result as Vicious Strikes? It sounds like a Deadly Strikes, but for the explosions themselves. Or is "Torpedo Striker" 2x as good b/c it affects the Radius instead of the overall Diameter of each explosion? Is there even a difference? Which is best? Thanks!
i have several questions, i just got a tenacity 10 servo, do i upgrade it to C7 move it and all my other mods to a medallion then upgrade it to C8?, whats the lowest Defense rate servo i can have on the one amp i only have an 8 at the moment, are there any substitutes for anti-melee or should i keep grinding for a 10/10 anti-melee/controller (i only have a 9/10 diverse CD)?
You always want to upgrade whatever item you are moving a mod from to be the same level as the destination item. It takes a 10/10 Defense Rate to get to the speed cap. You can do it lower, but a 10/10 will get you to max rate. Anti Melee or Controller are really the sweet spot mods.
Might be a dumb question, but doesn't the frost orcs freeze affect on reflect beam's rate? There's rate shard/mod on proton, and in flame aura, but why not in reflect? Just wondering...
@@zenozephirus6569 Tested it, and their freeze drops also reflect beam's rate. And I have fully upgraded c8 reflect beam with 10 tenacity. So why not use rate shard there? Maybe I'm missing something here, who knows...
@@MrJuicebags I see my description is a little bit misleading and needs further explanation :D If you position the proton slightly behind the reflect, even if it leaks out a bit to the right or left, it doesnt matter whether the proton has tenacity or not, because it is still protectet by the reflect. Cyborcs attack the closest defence they can find, which is the reflect, so the proton doesnt get touched. This is the reason why you dont have to protect defences from all sides by cyborcs but just from the front. So you can place them "outside" of the reflect's width but it has to be behind it in general. (You can even trap cyborcs at the spawn with a 2 node reflect and they really stay there and hit the reflect until the end of a wave if theres not enough damage to kill them :D ) I can confirm that no cyborcs came through with this method until at least floor 400, further i dont know yet. The thing is that if it works for me, then it probably works for others aswell, cause i also didnt have the perfect build up to this point and it still worked, even if you dont have the strongest reflect. With this knowledge you can build the same pattern but with one tenacity less. Many are looking for 10/10 tenacity, if you need one less, it's not that much of a hassle to get the build running. I had a chat with random persson, he said it doesnt work on higher floors. Although i cannot confirm that yet, i think it will definately help people who are currently below floor 400 . THIS IS NOT MEANT TO BE FOR "GENERAL" USE ! Of course the tenacity is useful! It is more for newer players, who wanna do their first onslaught push. So this can be used as a "cheap version" of your build. Also: Controlled burn lanes are kind of a problem because the proton does get hit for some reason, when they are directly behind the reflect, so i just had to move it back a little and you can also add some PDTs as assistance. You may wanna pin my comment, so more people will read this. This means, if you agree on what i'm saying :D Many thanks for the great content Juicebags! I really enjoy your videos, keep it up :) Greetings from ReXo aswell!
@@Ergonax But... as you push higher in floors and enemies don't die instantly (happened to me today on floor 506 after seeing your comment) Larger groups of cyborks get pushed over to the side where then the closest thing for them to hit is a proton even back away from the reflect. Plus the Cybork attack is not a single target attack, it is a wave that will hit anything exposed. Additionally, there is literally no where else in the build where I would want to spend 10DU to even risk it if it only happened 1 out of every 20 times. There is just no reason for a newer player to extend their risk on such a powerhouse of a build. Would only add the risk of failure, and heavily reduce your combo area with no gain but 10DU. Edit: Didn't see that massive wall of text before responding :P Of course there are other uses for reflect beams, but...those other uses have nothing to do with this video :) Don't confuse what this video is. It is a modular build that will allow a new player to use on almost any lane in the game while having very little understanding of all the games mechanics. Is there other ways to do things? Well of course there are, but everything listed in this video is with the intent to get people started. With next to no chance of failure.
@Cole Benoit In a lane with cursi kaze you can also use a pdt in there if you dont have a tenacity on proton. The PDT then doesnt get cursed if you put it further away so the goblins wont affect it. So you get the petrify AND the damage of a poison defence :) You also have to consider that on cursi kaze lanes your destructive pylon on proton and the slow still work. Even when the proton is cursed. You just loose the damage of the proton :) so if you have enough damage in your reflect or another defense it still works. But if you dont have that, then a tenacity on proton will be the better choice :)
Hey JuiceBags! I started playing recently, and i have watched a few or your videos. I'm at chaos 7 trying to climb floors at onslaught before going for ancient power reset. I don't have the tenacity mod, so i'm currently using WM with shocking revelation and the Petrify Combo (ES and PDT). But i'm still not doing that well, do you have any tips for me? i'm also farming the shards in mastery, and i have the 3 main shards on the towers i use (Dfense power, range and atack speed). Thank you!
The petrify combo works great. The weapon man is not a heavy hitter though. You would get far more damage using that 60 DU for literally any other damaging defenses that are suitable for that lane.
My advice: Use ballons instead of the weapon mans if you don't have a 10/10 C8 tenacity mod. Sure, most players are looking down on the ballons but the biggest plus for them is that they will always tick for 10 seconds after exploding. Even if a Cyborc is stunning them after exploding. So if that happens, they will kill the cyborcs in return before getting a time out for 10 more second (especially since orcs are a little dumb and often try to stun the ballon over and over again as long as it is ticking). That alone buys a lot of time. As soon as you've gotten high enough in onslaught you can try to reroll a tenacity mod and swap the ballon for other things but until then they are pure gold. At least in my opinion.
As long as they aren't lady orc's or frost mobs (because they are immune to slows), you get a lot of natural slow from Boosted Grasp on the Boost Aura. The Proton Beam also has a slow on it as well after you spec into it in Ascension. If you are having mobs leak, you can use a frostbite tower for even more slow and also a damage buff from the Frosty Power shard. For Lady Orc's and frost mobs, you can often just muscle through them with the double reflects (and FA's for frost mobs) even into the 200-300's of floors, but I mostly will re-roll those maps once I got into the 400's just because they got very frustrating to deal with mobs leaking every wave.
@@ft3Safety1st2 Like swinnin already told him, you cant slow bersercs or frost mobs sadly :( If you need more power to kill them, you can also use a frostbite with the shard frosty power on it. For mods on the frostbite you can watch juicebags video about it. This will help you kill them easier, but also only to a certain point cause the damage wont be enough on higher floors like swimmin also told him. But if you dont wanna reroll all the time, this can give you a bit off assistance until it also wont work. Also the frostbite wont attack frostmobs and for the frosty power shard to work he has to hit the an enemie so if you see him attacking, the other defences in the range of the frostbite should get the buff. So if your frostbite doesnt shoot at all in a complete frost lane, cause he doesnt attack frost mobs, like i mentioned earlier, your buff wont work :)
@@MrJuicebags Does it do it by increasing the crit rate of the other towers or does it simply calculate it's own sort of DPS for itself nd then give a portion of that estimated DPs to towers?
You also need to make sure that you put a chaos 7 10/10 tenacity on a chaos 7 relic before upgrading to chaos 8. I had a friend put a servo from a chaos 7 relic onto a chaos 8 mod, but it stays at chaos 7 so it isn't 100%. Also, when the cyborgs attack your RB's, it will get the stars around it like it is disabled, but as long as the beams aren't down they didn't actually disable it. It's just a visual from their attacks.
It's just RNG, but you can re-roll any tenacity if you farm tokens from either of the Drakenfrost maps. I believe that after 285 rolls you are guaranteed a 10/10 mod. It takes a lot of time grinding, but while you are grinding out the tokens you also have a chance for one to drop!
Looks like Random is gonna get 999 with the help of two others? Are they as clean and no ancient power as Random or are they sporting self-stunning weapon mans, lol?
He wasn't getting helped by those 2, he was grouping with those 2. You can't solo up to 999. Muggs has 70 resets and fale had 0. Legacy wmfs arent that good, muggs does have one but they didn't use it.
1 single chaos 8 ampoule. chaos 8 ampoules are rare drops from onslaught above floor 30. a chaos 7 , 10/10 tenacity mod reduces negative effects by 95%, but a chaos 8 10/10 tenacity mod reduces it 100%
i dont know but this build doesnt work anyway... the only stuff i am missing is a second tenacity but this build still have no damage... i am loosing prime5 with not even a kill.... AND.... the building cap is not enough in most maps mfr and flame works better then this... lol
The problem with generic builds is people become dependent on them and when they hit a wall (which they always do) they've had it. People are lazy Juice and you're giving them an out instead of showing them how to build correctly for what comes out those doors.
its another build that exemplifies what killed the game... you have to spend 15 years farming far beyond what you need to win...to win easier. like the south park wow episode after all that work...now we can finally play the game. no amps no 10/10 poison bees and earth vipers beat all these builds without having to upgrade 600 relics across 1041.9 heroes
@@codyriede9681 i do bees with poison and vipers with earth and for the omega waves i have a character for obelisk, i have 1 rank 10 on a tower i dont use and only 3 gilded shards and i have all but do not use the hyper shards
Fissures from lavamancer have more natural range but flames deal more damage. So its your decision what you prefer:) Either the better range of Fissures or the higher damage of flames :D
@@rexo1624 Another thing to consider is you sometimes have an easier time placing FA's around this build compared to fissures, and FA's get more benefits from upgrades compared to fissures. It's the same relic though, so feel free to swap between them and see what works best for you. I personally started using fissures, but swapped to FA's at around floor 150 or 200 and they haven't let me down up at floor 530 so far!
If you are upgrading Protons to Chaos 8 anyways, then 8/10 Rate Servo with non-gilded Defence Rate shard gives exactly the same as c7 9/10 Rate.
ty
Ah... Ok, i thought its not actually overcapped
Random Persson huh, I’ve been using a C8 10 DRate with a Guilded DefenseRate 😄 oops
Whats the reason you want to get over 100%?
I know it's overcapping but what happens when you reach 100% that you don't get at 99%. Also, do you get anything for going over 100%?
@@mattigutt9695 immune to frost orc. if u havent reach 100%. Frost orc gonna drop ur rate.
General info for newer players:
I deleted the previous comment and post it as a single comment again.
I see it way to often, that people are wondering about why their reflect gets disabled.
You have to upgrade your reflect to chaos eight with a tenacity 10/10 on it for it to work :D Also check that your tenacity 10 mod tells you "100" percent negative status effects reduction. Cause you can also move a lower chaos tier mod to a higher chaos tier relic but the mod wont upgrade then. So for example you would have a campaign or chaos 1-7 mod quality on your chaos eight reflect.
You always have to up the mod to the same chaos tier first and then move it to the relic where you want to have it. For example move a chaos 7 10/10 tenacity to your chaos 7 reflect relic and then upgrade it to chaos eight so the mod also gets upgraded to chaos eight and should show you 100 percent. So just check if it tells you 100 percent :) If thats the case then it should work even when your reflect sometimes seems disabled, cause that sometimes happens due to a visual bug. But it still works even when you see that the reflect is disabled. You can also tell if it works, when your proton or other defences behind it are still working, cause then youre tenacity on reflect does its job :)
So what is the best way to get a 10/10 tenacity?
Coneeect farm farm farm, or spend like 80 mil gold lmao
Thanks for looking out for the newbies!
I have followed this setup and its really strong but one problem i have is flyers, anyone have any answers on what i can do better? maybe my placements are off or it can be something else?
Normally there's spare du to throw down sgt or a flame lightning combo on a flyer
I don't suppose that by any chance you have a little 10/10 tenacity mod on a medallion ;) ..... Dont suppose you would chuck it this way would you? ;)
Thanks man! I just started playing again today after a long time and saw people using reflectors and proton beams and I was thinking, did they change that much? Reflectors for dmg? But after watching this video I understand it, time to get this setup
Juice is the Diverse Power Servo on the Boost not hitting the Reflect Beams now that there are two different Beams. ? Are they still considered unique? Thanks
The only reason you overcap the defense rate om protons is to uply poison when frost orcs come out?
Im fairly new to the game and did floor 363 without having any defense rate on the proton.
Not even a shard.
Just had a garbage posion servo.
Thanks in advance for explaining
yup, it is quite helpful against frost lanes. Any level of Poison MOD will get the job done!
Ive got ground lanes down solid, but the air lanes can be a pain sometimes. Anyone have a good air defense set up or other tower set up for air?
You can put a reflect beam around the core, and wyverns and zappers wont be able to hit it (most of the time). The regular kamikaze's can be completly ignored, and for emp kobolts, I would use a bait tower for them to dive into, best would be frostbite tower or obelisk
i usually like to have a separate flame aura just for flyers. But i also have 2 skyguards setup in case i wanna use 1 for dps or both for some petrifying. I just obliterate them because I don't want to take a chance on my core with reflect beams since the AI is... odd lol.
Full AFK C7. Yay :)
Juicebags a Question would it be useful to use the shard which strengthens the buff of buff auras effekt instead of destruction shard ?
Should be using both :)
2 points into the visious strikes give you the max range of 800 no need to put 12 points?
Yup, I use it on many different things though. So only putting in 2 points would hurt me when I swap it to something else.
@@MrJuicebags Does the "Torpedo Striker" shard from Chaos 8 give the same result as Vicious Strikes? It sounds like a Deadly Strikes, but for the explosions themselves. Or is "Torpedo Striker" 2x as good b/c it affects the Radius instead of the overall Diameter of each explosion? Is there even a difference? Which is best? Thanks!
@@jerryj5472 vicious is better
I’m having problems with my protons being stunned by cyborgs because they get past the beam and go straight for the protons. Any tips?
They won't get past the reflect beam with careful placement. DOn;t go too close to the spawns and they won't push through!
Alright I’ll try
yeah i use this build alot it's a good one to do
12:00 why would you use freeze on the proton beam if you are already using the earth/poison combo?
Why would you not? It is the single most useful shard on a proton beam! Additional chances to stun!
@@MrJuicebags Doesn't the short freeze stun on the proton beam worsen diminishing returns on all other stuns?
@@MrVhatever freeze has no DR
My impression from the spread sheet that Random posts is that he has done ancient power to get 999 ascension?
Would fissure be a better anti frost defence given the same setup as that anti frost flame aura or does flame aura outclass fissure?
i have several questions, i just got a tenacity 10 servo, do i upgrade it to C7 move it and all my other mods to a medallion then upgrade it to C8?, whats the lowest Defense rate servo i can have on the one amp i only have an 8 at the moment, are there any substitutes for anti-melee or should i keep grinding for a 10/10 anti-melee/controller (i only have a 9/10 diverse CD)?
You always want to upgrade whatever item you are moving a mod from to be the same level as the destination item. It takes a 10/10 Defense Rate to get to the speed cap. You can do it lower, but a 10/10 will get you to max rate. Anti Melee or Controller are really the sweet spot mods.
should i put my 7/10 tenacity on my c7 medallion or just wait for a 10/10 tenacity ?,. is 7/10 tenacity completely useless ?
You can reroll the 7/10 to get a better one, but yea, 7/10 is useless sadly :(
Broke out the ps4 today just bought a 10/10 power servo for 5 mil🤘🏻
Just bought a c8 amp for 2 mil getting lucky today
Might be a dumb question, but doesn't the frost orcs freeze affect on reflect beam's rate? There's rate shard/mod on proton, and in flame aura, but why not in reflect? Just wondering...
I think it's because the 100% protection from Tenacity 10/10 C8.
@@zenozephirus6569 Tested it, and their freeze drops also reflect beam's rate. And I have fully upgraded c8 reflect beam with 10 tenacity. So why not use rate shard there? Maybe I'm missing something here, who knows...
@@Mike-mi4fy Maybe... Just to be sure... is there a "100%" on the Tenacity mod??
@@zenozephirus6569 absolutely yes
So I really don't understand, if you overcap proton and flame aura, why not overcap rb's rate then!
Hey juice! if you have a gildet Defense rate What Will you put in instead of Defense rate servo on that flame aura?
Another anti mod since they stack in multiples.
What about the Flyers then?
The proton beam doesnt need tenacity, it doesnt get hit even if it is at the side of the reflect
It won't get hit every time, but it can get hit there, and does frequently. Move it back as shown, remove the possibility.
@@MrJuicebags I see my description is a little bit misleading and needs further explanation :D
If you position the proton slightly behind the reflect, even if it leaks out a bit to the right or left, it doesnt matter whether the proton has tenacity or not, because it is still protectet by the reflect. Cyborcs attack the closest defence they can find, which is the reflect, so the proton doesnt get touched. This is the reason why you dont have to protect defences from all sides by cyborcs but just from the front. So you can place them "outside" of the reflect's width but it has to be behind it in general.
(You can even trap cyborcs at the spawn with a 2 node reflect and they really stay there and hit the reflect until the end of a wave if theres not enough damage to kill them :D )
I can confirm that no cyborcs came through with this method until at least floor 400, further i dont know yet.
The thing is that if it works for me, then it probably works for others aswell, cause i also didnt have the perfect build up to this point and it still worked, even if you dont have the strongest reflect.
With this knowledge you can build the same pattern but with one tenacity less.
Many are looking for 10/10 tenacity, if you need one less, it's not that much of a hassle to get the build running.
I had a chat with random persson, he said it doesnt work on higher floors.
Although i cannot confirm that yet, i think it will definately help people who are currently below floor 400
.
THIS IS NOT MEANT TO BE FOR "GENERAL" USE !
Of course the tenacity is useful!
It is more for newer players, who wanna do their first onslaught push. So this can be used as a "cheap version" of your build.
Also: Controlled burn lanes are kind of a problem because the proton does get hit for some reason, when they are directly behind the reflect, so i just had to move it back a little and you can also add some PDTs as assistance.
You may wanna pin my comment, so more people will read this.
This means, if you agree on what i'm saying :D
Many thanks for the great content Juicebags!
I really enjoy your videos, keep it up :)
Greetings from ReXo aswell!
@@Ergonax But... as you push higher in floors and enemies don't die instantly (happened to me today on floor 506 after seeing your comment) Larger groups of cyborks get pushed over to the side where then the closest thing for them to hit is a proton even back away from the reflect. Plus the Cybork attack is not a single target attack, it is a wave that will hit anything exposed. Additionally, there is literally no where else in the build where I would want to spend 10DU to even risk it if it only happened 1 out of every 20 times. There is just no reason for a newer player to extend their risk on such a powerhouse of a build. Would only add the risk of failure, and heavily reduce your combo area with no gain but 10DU. Edit: Didn't see that massive wall of text before responding :P Of course there are other uses for reflect beams, but...those other uses have nothing to do with this video :) Don't confuse what this video is. It is a modular build that will allow a new player to use on almost any lane in the game while having very little understanding of all the games mechanics. Is there other ways to do things? Well of course there are, but everything listed in this video is with the intent to get people started. With next to no chance of failure.
@Cole Benoit In a lane with cursi kaze you can also use a pdt in there if you dont have a tenacity on proton. The PDT then doesnt get cursed if you put it further away so the goblins wont affect it. So you get the petrify AND the damage of a poison defence :) You also have to consider that on cursi kaze lanes your destructive pylon on proton and the slow still work. Even when the proton is cursed. You just loose the damage of the proton :) so if you have enough damage in your reflect or another defense it still works. But if you dont have that, then a tenacity on proton will be the better choice :)
Does random have a chanel where he showed his climb ?
No, tough to do a hard grind like that and create content at the same time. Maybe he will add one in the future!
This works crazy well however I don’t have a 10 10 so it’s not at its full potential
is a 9/10 tenacity good too?
What do you mean by double stacking mods at 13:12 ? :)
Anti Mods stack multiplicatively
Hey JuiceBags! I started playing recently, and i have watched a few or your videos. I'm at chaos 7 trying to climb floors at onslaught before going for ancient power reset. I don't have the tenacity mod, so i'm currently using WM with shocking revelation and the Petrify Combo (ES and PDT). But i'm still not doing that well, do you have any tips for me? i'm also farming the shards in mastery, and i have the 3 main shards on the towers i use (Dfense power, range and atack speed). Thank you!
The petrify combo works great. The weapon man is not a heavy hitter though. You would get far more damage using that 60 DU for literally any other damaging defenses that are suitable for that lane.
My advice: Use ballons instead of the weapon mans if you don't have a 10/10 C8 tenacity mod. Sure, most players are looking down on the ballons but the biggest plus for them is that they will always tick for 10 seconds after exploding. Even if a Cyborc is stunning them after exploding. So if that happens, they will kill the cyborcs in return before getting a time out for 10 more second (especially since orcs are a little dumb and often try to stun the ballon over and over again as long as it is ticking). That alone buys a lot of time. As soon as you've gotten high enough in onslaught you can try to reroll a tenacity mod and swap the ballon for other things but until then they are pure gold. At least in my opinion.
Anyone know if this still works with arachnophobia lanes?
Don't fight the base strategies! If it is a spider lane use ranged towers, it is the natural counter.
@@MrJuicebags good point thanks for replying juice
do lady orcs and ogres count as orcs?
Yes to ladyorcs.
Juice bags!!!
What side is the front
Is the poisen servo still existing? I‘ve never seen one
Yup still around!
Hi Juice any Idea of how to deal with headstrong ?
As long as they aren't lady orc's or frost mobs (because they are immune to slows), you get a lot of natural slow from Boosted Grasp on the Boost Aura. The Proton Beam also has a slow on it as well after you spec into it in Ascension. If you are having mobs leak, you can use a frostbite tower for even more slow and also a damage buff from the Frosty Power shard. For Lady Orc's and frost mobs, you can often just muscle through them with the double reflects (and FA's for frost mobs) even into the 200-300's of floors, but I mostly will re-roll those maps once I got into the 400's just because they got very frustrating to deal with mobs leaking every wave.
I think you just have to slow them with the proton and boost as he shows in the video. Headstrong assassins is another story.
@@ft3Safety1st2 Like swinnin already told him, you cant slow bersercs or frost mobs sadly :( If you need more power to kill them, you can also use a frostbite with the shard frosty power on it. For mods on the frostbite you can watch juicebags video about it. This will help you kill them easier, but also only to a certain point cause the damage wont be enough on higher floors like swimmin also told him. But if you dont wanna reroll all the time, this can give you a bit off assistance until it also wont work. Also the frostbite wont attack frostmobs and for the frosty power shard to work he has to hit the an enemie so if you see him attacking, the other defences in the range of the frostbite should get the buff. So if your frostbite doesnt shoot at all in a complete frost lane, cause he doesnt attack frost mobs, like i mentioned earlier, your buff wont work :)
Sorry maybe I should specify from floor 350s and up it’s a terrible combo if you get headstrong frost and lady orcs this is what I’m asking
I need help with flame aura
Does he use reflect beams around the crystal with same auras for aerials?
below floor 500 ish I have just used skyquards. Depending on the flyer lane, if it is all ranged flyers reflects work great, no auras needed.
@@MrJuicebags thank you for the response and information
Wait, what? how does boost aura gain from critical mods when it does no damage?
Just like Defense Power, it passes a portion of it along to the defenses it is buffing!
@@MrJuicebags Does it do it by increasing the crit rate of the other towers or does it simply calculate it's own sort of DPS for itself nd then give a portion of that estimated DPs to towers?
ik this video is old but what doe amp mean
It's a crafting material
What are the shards for the reflect beam if you have a 10/10 defense rate mod on it?
7:50
havent played this game in a long time, reflect beams still the best "dps trap" ? lmao
trendie didnt bother to fix its issues and made another reboot that cost 40 dollars.
@@meepst6267 trendy doesnt exist anymore, cromatic games made dd1, trendy purchased cg, trendy made dd2, cg purchased trendy, cg made dda.
@@kemoka3357 cg didn't make dd1 trendy did
Even after reflect beam, my defense is getting stunned by the enemy of Chaos 2.
on onslaught floor 92
You also need to make sure that you put a chaos 7 10/10 tenacity on a chaos 7 relic before upgrading to chaos 8. I had a friend put a servo from a chaos 7 relic onto a chaos 8 mod, but it stays at chaos 7 so it isn't 100%.
Also, when the cyborgs attack your RB's, it will get the stars around it like it is disabled, but as long as the beams aren't down they didn't actually disable it. It's just a visual from their attacks.
i'm having trouble getting a 10 tenacity any tips or is it just pure luck
It's just RNG, but you can re-roll any tenacity if you farm tokens from either of the Drakenfrost maps. I believe that after 285 rolls you are guaranteed a 10/10 mod. It takes a lot of time grinding, but while you are grinding out the tokens you also have a chance for one to drop!
you have to keep re-rolling. Had to win drakenfrost resort or keep 138 times for the reroll tokens... it's a long grind.
Looks like Random is gonna get 999 with the help of two others? Are they as clean and no ancient power as Random or are they sporting self-stunning weapon mans, lol?
He wasn't getting helped by those 2, he was grouping with those 2. You can't solo up to 999. Muggs has 70 resets and fale had 0. Legacy wmfs arent that good, muggs does have one but they didn't use it.
what does one amp even stand for`?
1 single chaos 8 ampoule. chaos 8 ampoules are rare drops from onslaught above floor 30. a chaos 7 , 10/10 tenacity mod reduces negative effects by 95%, but a chaos 8 10/10 tenacity mod reduces it 100%
What the hell Is an amp
A crafting material, maybe take a look at tinkering basics here! ruclips.net/video/Km0SxX-mEO0/видео.html
i dont know but this build doesnt work anyway... the only stuff i am missing is a second tenacity but this build still have no damage... i am loosing prime5 with not even a kill.... AND.... the building cap is not enough in most maps mfr and flame works better then this... lol
Strongest setup in the game lmao, you must be doing something wrong
@@bradyshockey7637 isnt hard to copy ^^ but what ever i keep my own build :P it feels stronger...
Frank I know it isn’t hard to copy lmao, but you can easily push to floor 500 with this build
The problem with generic builds is people become dependent on them and when they hit a wall (which they always do) they've had it. People are lazy Juice and you're giving them an out instead of showing them how to build correctly for what comes out those doors.
its another build that exemplifies what killed the game... you have to spend 15 years farming far beyond what you need to win...to win easier. like the south park wow episode after all that work...now we can finally play the game. no amps no 10/10 poison bees and earth vipers beat all these builds without having to upgrade 600 relics across 1041.9 heroes
What build are you running ?
@@codyriede9681 i do bees with poison and vipers with earth and for the omega waves i have a character for obelisk, i have 1 rank 10 on a tower i dont use and only 3 gilded shards and i have all but do not use the hyper shards
So budget build? Uhhh..
Oh yea, big time. A full set up for a high onslaught build costs like literally 100X what you would have in to this.
can i use lavamancer against frost?
Oh ya, I use both regularly.
Fissures from lavamancer have more natural range but flames deal more damage. So its your decision what you prefer:) Either the better range of Fissures or the higher damage of flames :D
@@rexo1624 Another thing to consider is you sometimes have an easier time placing FA's around this build compared to fissures, and FA's get more benefits from upgrades compared to fissures. It's the same relic though, so feel free to swap between them and see what works best for you. I personally started using fissures, but swapped to FA's at around floor 150 or 200 and they haven't let me down up at floor 530 so far!