2004 Dodge Ram Check Gauges Fix. P2502 & P2509 Voltage

Поделиться
HTML-код
  • Опубликовано: 16 сен 2024
  • 2004 Dodge Ram Check Gauges low voltage fix P2502 & P2509 OBT Code.

Комментарии • 19

  • @christianduran9266
    @christianduran9266 4 года назад +4

    Thank you for your information.. this information works for me.

  • @slinkyaroo
    @slinkyaroo 3 года назад +5

    Do a Guage recalibration first whenever a Guage seems off. Hold the trip pin in and turn the ignition to run, not start. There's vids on it.

    • @slinkyaroo
      @slinkyaroo 3 года назад +1

      ruclips.net/video/iEh2mAIq05Q/видео.html

  • @Josesaldivar706
    @Josesaldivar706 2 года назад +2

    Brother I got the same issue on 06 Cummins you save me some 💰💰💰💰

  • @jamesporter1574
    @jamesporter1574 3 года назад +1

    I had the same kind of instant happen but with me it was the water pump was intermittent causing a signal and then overheat it. I opened the hood and it was the water pump that went. I also had three engines on the 4.7 L Dodge 1500 I wasn't too happy.

  • @Ruben901
    @Ruben901 3 года назад +2

    I replaced both of my bats on my 04 3500 and the light came on. I double checked and made sure terminals were clean and tight.

    • @MrChuntaro
      @MrChuntaro  3 года назад +1

      It's been two days now, is the light still on?

    • @Ruben901
      @Ruben901 3 года назад +2

      @@MrChuntaro
      Update: After a week of the check gages light being on, as i was driving my ABS light, brake light, and Airbag light came on, i was losing acceleration as i was driving home. I just removed the alternator tonight, and hopefully replace it tomorrow morning. Will be updating on this post. FYI: i bought my dually used in the year 2016...only god knows how old that alternator is.

    • @Ruben901
      @Ruben901 3 года назад +3

      Another update: So apparently when installing the new batteries i seem to have forgot to bolt back the alternator cable to the battery 😅😅😅. Well i hope that was it, tomorrow will be the day

    • @Ruben901
      @Ruben901 3 года назад +5

      OK! FINAL UPDATE! It turned out to be the alternator cable that i forgot to bolt back onto the battery. Truck starts like new

  • @dixsigns1717
    @dixsigns1717 3 года назад +1

    Thank you.

  • @Lamarblaze24
    @Lamarblaze24 Год назад +1

    So my check gages light came on I went to autozone to get it charged and and it was still on then it died so I thought my battery was just old so I got a new battery and about 15mins away from work the check gages light came on again

  • @Bigdawgblu74
    @Bigdawgblu74 Год назад +1

    If the gauge goes to high is that a bad thing cause thats whats happening with mine now

    • @andybilakshow260
      @andybilakshow260 Год назад

      Voltage regulator bad. Might overcharge your battery.

  • @justlikeyourmom
    @justlikeyourmom 3 года назад +1

    Does your temp gauge work ?

    • @MrChuntaro
      @MrChuntaro  3 года назад +1

      Yes. The truck was just cold.

  • @jgomez3223
    @jgomez3223 3 года назад +2

    Does it start rough mine takes about two times to start.

    • @MrChuntaro
      @MrChuntaro  3 года назад

      No. It would start right up.

  • @maxdeal1856
    @maxdeal1856 Год назад +1

    Cross over wire