ShopJimmyO.com Support the build!! / jimmyoakes / jimmyoakes Send some sub mail!! Jimmy Oakes PMB 169 61 N. Plains Industrial Rd. Wallingford, CT 06492
60fps was the best change mike made for adam. It just looks so much better. Like i'd take 720/60 over 1080/30 any day. Also when are you guys tossing a turbo and a shift kit in that gs300? Stevie can't be running an na 2jz working with you.
Also really hype on the 60 fps but I gotta disagree with you g. Anything below 1080 on any screen larger than a mobile device really doesn’t look acceptable in 2022. 1080/60 fs the sweet spot unless he’s tryna build something crazy to render with.
Considering movies still use 24fps as standard.. I'd say it's proof enough that quality is more important than frame rate. So I prefer 1080/30 over 720/60... BUT you need a steady cam and proper settings if you're gonna be using lower frame rates because that shit will give you a sore head with a shaky camera.
Jimmy the end the hoop on as you walk in put hoist to right for the long term projects to sit in the down period to leave main work hoist open yea be slight pain moving them but same time keeps flow and forward momentum. As for the shelves down left wall if clear door opening then all sore trans/ engines and parts and then the far end a chill out area/ half pipe
It's really what I've been loving since he joined. Most of the videos Adam and Taylor Ray post are more mechanically leaning and so they'll mention some things and not elaborate as much. Stevie asking every man questions really helps me learn as well as I'm just recently getting more into the mechanical side of things myself.
Love the content, been watching since 2017 H2Oi and so glad you never stopped on the YT grind. Never comment on videos but I think moving the fourpost lifts you already have into the storage bay, will clean up the front of the shop and allow more storage in the storage bay and give you some more working room in the shop, I know it is a lot to do but for me and many others, satisying content. Plus could build the "loft" around the lifts and make it look like the red Z is in the loft
I think the reason the transmission wouldn’t go smoothly all the way onto the engine is because you’re supposed to put the clutch disc and pressure plate onto the transmission, install the transmission onto the engine and then tighten the pressure plate through the access plates on the gearbox. Doing this way allows the transmission to slide onto the back of the engine smoothly and easily, and eliminates the needs for an alignment tool too :)
I cannot believe that DJ didn’t just buy an irrigation hose instead of a garden hose but he also used it to wash his car, I would love to see that sight, it’s like something out of a comedy sketch!
The fact there was a skatepark in your shop previously is testament to the fact you need to put a little half pipe in for little jam sessions!! Love the content as always!
Should put a prep/paint corner just tarps etc would work like Bryan used to have.. Could go in the close corner by the bay door so you can blow all the mess out there after and still have heaps of room for storage? Be sweet to have a corner for that we all know you need it 😜
Looks better 60fps👍 I'm wathing your channel for years now, long enougt to change my rides from VAG to BMW and JDM. First test drive e30 and 2 weeks later I'm owning, 2 days later diff been welded and me drift to lamp post.Drift Lesson nr 1 learned.Love your passion for cars and drift. Tony is less red face in front of camera finally but is nothing wrong to be shy. Stevie recording studio is progressing fast. All the best for all of you.
Push or pull handle the same, whats the biggest downfall for the pull type, is u have more of a risk running into crank walk...just get rid of the clutch/neutral safety switch, and it's no big deal.
I appreciate how informative your videos are. Recently came across your whole crew RUclips collective, love the content. Keep up the hustle! From New Zealand 🤙
I do appreciate stevey asking questions because I had the same question but he asked it for us! Dope, that he's into the car scene but doesn't front like he knows it all. Total good viibes from him always :)
How about a Loft at the wall to the old bay and some windows there? Then You could watch all the cars from the loft and also have like a little tunnel to drive through.
Can’t tell you how many times I used a 3/8ths impact to put a trans on when it wouldn’t slide on, I’ve never damaged anything it’s one of those things that everyone says you shouldn’t do but if you have any sense at all it’s really hard to mess up
Lmfao here’s Donny But yo the look on jimmy’s face when the old dude came in saw them destroying the wall was hilarious went from happy to oh shit serious time
Tell DJ the green flexzilla hoses are the bomb and way worth the money don't cheap out on a hose. All of you trust me they are the best water hose you can buy!!
Everyone needs a 90-120lb helper. Adam has Sean, Rudnick has willy, jimmy has ant. They are able to reach in those tight spots for ya. 😂 I got 2 little Indian fellas that I hired for that reason in my shop. I love em.
I think that second shop area would work really well as storage for a few lower class cars and also some big shelving for tons of part storage, trannys, engines, body kits, all that sort of stuff!
I think Stevie brings a couple things none of the other do and the major thing being a less car educated mind being there to ask the right questions that most car savvy people wouldn’t think to ask.
13:09 “it’s gonna leave your body” - Ant… that was so dark someone needs to crop that and make a tik tok And DJ is a City worker at heart. “He said the whole wall right” 😂 this crew is insane! I love it!
![Run Away - Tzuyu(TWICE) ツウィ 쯔위 [Music Bank] | KBS WORLD TV 240906](http://i.ytimg.com/vi/KnHNNyAYiu0/mqdefault.jpg)
Dj buying the wrong hose with all the holes in it literally made me cry laughing 🤣🤣🤣
Dude that shit was hilarious!!!!
Yeah that got me 🤣
To grow tomatoes 😂😂😂
Yup dude is Sound as a pound but man he's a derp 🤣 he could use that hose to grow his own plants 🪴😂
"i got soaked washing my car" he fully committed too😂💀
60fps was the best change mike made for adam. It just looks so much better. Like i'd take 720/60 over 1080/30 any day. Also when are you guys tossing a turbo and a shift kit in that gs300? Stevie can't be running an na 2jz working with you.
Also really hype on the 60 fps but I gotta disagree with you g. Anything below 1080 on any screen larger than a mobile device really doesn’t look acceptable in 2022. 1080/60 fs the sweet spot unless he’s tryna build something crazy to render with.
@@ALC570 I mean I was sitting there on my lunch break sitting in my car. I was on my phone,.
Ok, so I suppose I’m one of the only ones that hates watching videos in 60fps when it’s not action sports
Considering movies still use 24fps as standard.. I'd say it's proof enough that quality is more important than frame rate. So I prefer 1080/30 over 720/60... BUT you need a steady cam and proper settings if you're gonna be using lower frame rates because that shit will give you a sore head with a shaky camera.
Jimmy the end the hoop on as you walk in put hoist to right for the long term projects to sit in the down period to leave main work hoist open yea be slight pain moving them but same time keeps flow and forward momentum. As for the shelves down left wall if clear door opening then all sore trans/ engines and parts and then the far end a chill out area/ half pipe
60FPS looks like a video game, I like it
The lighting in the storage side really shows how nice of lighting you have in the working shop
Facts
I love that stevie is enjoying learning as he films. I feel like he’d rock a nice clean chaser. Nothing crazy but classy as fuck
It's really what I've been loving since he joined. Most of the videos Adam and Taylor Ray post are more mechanically leaning and so they'll mention some things and not elaborate as much. Stevie asking every man questions really helps me learn as well as I'm just recently getting more into the mechanical side of things myself.
Vskf's would be fitting to stevie
Oh he is getting into it.
A VIP for sureeee hahaha
he feels like a VIP car guy
I like when Stevie ask questions cuz then we get more info and content about the car and car stuff
It’s almost heart warming too because i know he’s just trying to learn more
It’s awesome to think so many other people learning to and I learn new stuff all the time watching
@@hezekiah5537 right, I’ve been watching the CT crew since the haggard days and I’ve learned so much lol
@@gabrielcastaneda4387 same dude good times lol
Side garage would look great with an epoxy floor with the O symbol.
💯
And move the 4 post lift over there and put the z, maybe a few more 4 post
Love the content, been watching since 2017 H2Oi and so glad you never stopped on the YT grind. Never comment on videos but I think moving the fourpost lifts you already have into the storage bay, will clean up the front of the shop and allow more storage in the storage bay and give you some more working room in the shop, I know it is a lot to do but for me and many others, satisying content. Plus could build the "loft" around the lifts and make it look like the red Z is in the loft
That would look sick, have it raise up into the loft, great idea.
Stevies been learning so much I'm sure he'll be building cars in no time. Would be dope to see him get a gangster car and do the basics on it
He’s got a stock gs300 so I’m hoping he’d do something with that
The garages being conmected is such a dope flex.. TTMN
60FPS is noooice!
Major opportunity missed to have DJ with his hard hat on rip a 110 right through the drywall.
Dj would’ve been down to do that in a heartbeat 🤣
“Here’s Donny” had me in stitches!! Loving the shop progress.
I absolutely love when Stevie asks questions. Just like me, sometimes I don’t know what they’re talking about. We all learn
I think the reason the transmission wouldn’t go smoothly all the way onto the engine is because you’re supposed to put the clutch disc and pressure plate onto the transmission, install the transmission onto the engine and then tighten the pressure plate through the access plates on the gearbox. Doing this way allows the transmission to slide onto the back of the engine smoothly and easily, and eliminates the needs for an alignment tool too :)
I cannot believe that DJ didn’t just buy an irrigation hose instead of a garden hose but he also used it to wash his car, I would love to see that sight, it’s like something out of a comedy sketch!
Donald in all his safety gear absolutely fucking kills me 😂😂😂
Move the 4 post lift into there and get some pallet racking for parts on the wall that abuts the old shop.
The Blitz 03s should definitely go on the chaser! its such a good combo!
i dig the 2k/60fps footage. killing it bro!
Running 60fps at 1080p resolution on the video... *chefs kiss*
Seriously it looks phenomenal!
I'm liking the 60 looking 👌
"that thing just got me dirty 😳". Laughed out loud, woke up my baby 🤣🤣🤣🤣🤣
The fact there was a skatepark in your shop previously is testament to the fact you need to put a little half pipe in for little jam sessions!! Love the content as always!
Love the 60fps at the highest res you can bring!
Pro tip to walk a transmission in: use ratcheting wood clamps. They're light, come in all sizes, and aren't going to damage anything.
The dedication DJ had to washing that car was unmatched.
60FPS is so clean and smooth, such a difference cinematically
18 blitz crazy he gave those up STONKS!
Should put a prep/paint corner just tarps etc would work like Bryan used to have.. Could go in the close corner by the bay door so you can blow all the mess out there after and still have heaps of room for storage? Be sweet to have a corner for that we all know you need it 😜
Looks better 60fps👍 I'm wathing your channel for years now, long enougt to change my rides from VAG to BMW and JDM. First test drive e30 and 2 weeks later I'm owning, 2 days later diff been welded and me drift to lamp post.Drift Lesson nr 1 learned.Love your passion for cars and drift. Tony is less red face in front of camera finally but is nothing wrong to be shy. Stevie recording studio is progressing fast. All the best for all of you.
60FPS IS SO NICE
Ngl that transition of clearing out stuff from in front of the wall was hard af
New space pallet racks for parts and car stackers for storage, and still have space for activities.
16:49 was so damn funny! You looked like you got caught by your dad doing something he JUST told you NOT to do🤣
14:43 The way DJ lights up is fucking gold.
You need some ceiling height pallet racking. That way you store everything vertically and have more space
One thing that would be good to see. Now your de cluttering the shop is to have a section just for your engine building, like a work bench etc
Patreon gang where you at?
Wuz good G
You beat me this time!
@@derpman2013 just this time?
Yo dj is so funny …hangs down my favorite RUclipsr
Oh yeah right on time!!!
Push or pull handle the same, whats the biggest downfall for the pull type, is u have more of a risk running into crank walk...just get rid of the clutch/neutral safety switch, and it's no big deal.
Awesome to see the chaser finally getting closer to being done. Also Djay buying that irrigation hose was fucking hilarious. Really herbed that one 😂
60fps on a bigger TV looks great. Awesome quality
60 looks good but for vlogs i think 30 would be better unless it involves drifting
Make that the Dyno room and add couple four post lifts on each side of the dyno for storage
60 fps looks soo good. Keep it up jimmy, this year is already crazy for you
I’m a huge fan of any extra frames, it definitely smooths everything out.
Definitely keep the 60FPS. Bigger change than the most recent camera upgrade imo.
The hose cracked me up 😂🤦
In low light settings you could always film in 30 to get better lighting but daytime and shop 60 frames all day.
I appreciate how informative your videos are. Recently came across your whole crew RUclips collective, love the content. Keep up the hustle!
From New Zealand 🤙
I do appreciate stevey asking questions because I had the same question but he asked it for us! Dope, that he's into the car scene but doesn't front like he knows it all. Total good viibes from him always :)
The more frames the better also ! 60fps hits it reminds me when the ufc camera swaps we all call it the "video game" camera.
Gotta Slap 2 4 posts in the storage shop and get a bunch of shelving for parts storage!
How about a Loft at the wall to the old bay and some windows there? Then You could watch all the cars from the loft and also have like a little tunnel to drive through.
60fps is the best to watch in my opinion, 1080p/60fps is the move
Can’t tell you how many times I used a 3/8ths impact to put a trans on when it wouldn’t slide on, I’ve never damaged anything it’s one of those things that everyone says you shouldn’t do but if you have any sense at all it’s really hard to mess up
I kinda like the 60fps. so smooth and crisp.
“He must like you or sum”🤣😂😂😂
Lmfao here’s Donny
But yo the look on jimmy’s face when the old dude came in saw them destroying the wall was hilarious went from happy to oh shit serious time
Jumping in to say I'd welcome a switch to 60 FPS 👌
Tell DJ the green flexzilla hoses are the bomb and way worth the money don't cheap out on a hose. All of you trust me they are the best water hose you can buy!!
1440@60 is dope. Keep it!
Pleeeeease always upload in 1440p 60fps!! Jimmy it's gorgeous
Put 2 storage lifts in the new shop will look dope and open up ur side more
1440p 60fps is a nice upgrade from 1080/30, i prefer it because i usually watch on my OLED TV so it looks way better.
Love Stevie’s commentary 🤣👍🏽
Blitz on the chaser 100%!
Damn, jimmy in the boys are here 2 times as long. 60 frames, crispy
Move the four post lift in to the new spot for storing cars.
Put some 4 post lifts in for storage or move them from the old bay into the new bay and put another 2 post
Jimmy I appreciate your content, the knowledge and your friend/family support it’s awesome to see all you collaborating together
Adam has the LZ Compound so Jimmy is slowly taking over an industrial complex.
I run a 2jz with a r154 on a pull clutch as a drift car over 600 hp and still going strong it is a 6 paddle competition clutch
Everyone needs a 90-120lb helper. Adam has Sean, Rudnick has willy, jimmy has ant. They are able to reach in those tight spots for ya. 😂 I got 2 little Indian fellas that I hired for that reason in my shop. I love em.
17:40 good thing Dj had his hard hat on🤣
So lucky to pick that exact spot for the door to new shop, it's already damaged and would be perfect to fix with a doorway.
60fps looks good... LET IT BANG🔥
Is no one gonna mention the snap when ant was tightening and Jimmy was literally saying if you feel tension stop and back off hahaha
Also, 60fps looks super nice and crispy
Always stoked when you upload🔥
Not just 60fps but 1440 at 60fps! Hot damn it’s a good day!
I feel like 60fps is more appropriate for the vlogs. Keep 30fps for the music videos :)
I think that second shop area would work really well as storage for a few lower class cars and also some big shelving for tons of part storage, trannys, engines, body kits, all that sort of stuff!
60fps looks good
60fps looks so much more live. please keep it that way, way higher quality looking
I think Stevie brings a couple things none of the other do and the major thing being a less car educated mind being there to ask the right questions that most car savvy people wouldn’t think to ask.
jimmy uplaoding right when my classes finish is the best friday gift.
13:09 “it’s gonna leave your body” - Ant… that was so dark someone needs to crop that and make a tik tok
And DJ is a City worker at heart. “He said the whole wall right” 😂 this crew is insane! I love it!
Should definitely make the garage more like a showroom for you builds
Yo jimmy, if you still have all the old flags from the OLD shop that all came from sub mail, you should chuck them all up in the new storage workshop
yes Jimmy frames are life
I just put a brand new r154 in my 1jz soarer. would have been great to have this video before i finished. 60fps also looks good for the vlog
Get a mini paint booth or pop up body work space so you can have b hall come by and body work the cars from time to time.
Let it bang on 60 for vlogs. Use 30 for brolls and cinematic stuff.
Dj was ready to wreck some shit. 😂😂
16:48 I'm not Mad. I'm disappointed 🤣
Bro this quality is AMAZING!! I’m in love 😍
loving thr 60 frames! its super clean!
You want a box beam header over the bay to add some structure back, you can buy them pre made and it's usually cheaper than building one