This is excellent. Answered all my questions after 10 years of wondering how the blessed thing worked. Vaillent is missing a trick by not using you to create its user guidance videos. You are concise, informative and simple without being simplistic. Outstanding Compared to Vaillant’s instruction booklet which is bloated, over technical and and hard to follow.
Thankyou so much for your help. It’s the Christmas bank holidays, the water pressure in my boiler flashed f22 and my home was freezing. You’ve helped us stay warm and happy 🎄🥰
Thank you for this and your other videos I have viewed, Mark. I struggled to correctly adjust and customise the settings on my boiler despite following the manual. Your precise and clear instructions and excellent accompanying videos have made the task easier.
Thanks a lot. Mum had a new water tank fitted with much better insulation and now the water is too hot at the tap. I was dreading having to adjust it but this really helps.
This has been so helpful since moving into our new home, thank you - the comfort setting has been costing us and didn't even know about it. All I need to do now is find a user manual for the Danfoss RX1 box underneath it - no idea what this is for or how to use it!!!
We keep our central heating temperature at 50°c and it slowly heats up the house just fine, we simply had to adapt our thermostat timings so that it can have more time to get to the target temperature
Excellent , and easy to understand. I have to admit, that my Vaillant ( this model ) has not been as reliable as a Rolls Royce, which is what i was told, this brand was. Regular servicing didn't seem to guarantee performance or reliability.
Great video, very useful. .I have the EcoTec Pus 418 but no comfort setting. The manual does not cover Comfort either. Looks like you dont reply to comments but if you did that would be useful . Thanks again. Easy to understand video, well presented
Great video. At night I've noticed the boiler seems to fire up every 20 to 30 minutes for 20 to 30 seconds at a time. Why is this and can you turn it off.
Great video and it help a lot to work in this boiler. Mark would like to ask you, how we can take the spanner symbol off in this boiler? Even when they are serviced or have been serviced they like to show spanner symbol and it is nightmare take the symbol off. Could you help me or us in this with One video showing the process? Thank you very much
This is a very good video! Thanks! I have a question. On our vaillant thermostat in our living room the display says it’s in summer mode. But if I check the boiler there is no “umbrella” summer symbol. How can I change it to winter? I can’t change it on the thermostat. Thanks in advance.
Hello how much could cost new boiler installation ...we have pump now..and pump is in second floor. we think to buy in 3 bed house with 1 bathroom vaillant eco tec 830 .we wish to do vertical output.... and do your company do installation in basildon.... Thank you... Kind regards Jola
Thanks for this great video. I have one question about the settings though. When following your instructions on saving temperature settings, my boiler (Ecotec plus) does not display OK and cancel on the display at any time. The temperature display continues to flash after changing it. if I press the right button it just goes to the comfort setting. If I just leave it to set itself, it never does. Am I missing something?
Hello, I have a problem... once a day the maximum flame turns on and burns for a few seconds, heating the water to 80 degrees, then turns off, the temperature drops to 70 and turns on again, and so on many times in a row... and the comfort sign flashes... and I turn off the boiler... and then it works as usual...
I wanted to ask what is probably a stupid question, I usually turn the heating off, this time of year from the wall controller, how do I do that on the actual boiler??
Hey, I don't seem to have 2 handles on the bottom of my boiler, nor is there a braided wire anywhere else on the system. I can however open 2 valves with a screwdriver, but the pressure doesn't go past 0.2 bar. What am I missing?
On my Vaillant system the hot water cylinder tank in separate in the garage. It’s heated by gas but is wired in also. I wanted to see the cost difference in heating on electric instead of gas but switching on the electric feed to it seems to make no difference to the gas usage. Do I need to tell the system to use electric instead of gas for the hot water?
Hi we have this boiler and today the heating is working but no hot water. In fact there is nothing on the left digital display. What could that be? Thanks
Firstly it is a combination boiler? Do you have 5 pipes coming off the bottom of the boiler? if you only have 3 then you have a different boiler. You probable have a hot water tank. If so you need your boiler central heating set to 60 degrees. Also check the thermoset on the hot water tank. Should be set between 50 and 60 degrees.
Hey my friend. I had a problem with low pressure but managed to sort that and increased the bar. I have hot water but no heating. My thermostat light isn't even coming on. I was thinking no water is going into the radiators.....any advice would be great
Wow very nice video you are professional engineer 😀 can you please kindly help me on my vaillant ecotec plus 837 R1 on central heating the boiler does on go on low flame at all ? It's just goes to high flame 🔥 and cuts out to the set heating temperature ie 60°C and cuts out then the temperature drops down to 34 °C and then its start again its keep on doing this the central heating system works fine and the radiator gets hot but the boiler is not going to the low flame? Please kindly help me on this issue waiting for your reply Thankyou
Very knowledgeable video very well explained we t have this boiler but it seems to take an age to heat our radiators up the digital temperature numbers take an age to climb is there a reason or this our friends have the same and it heats up in no time its like our boiler stops and starts constantly can you give any advice please .
I don't have a tap symbol on my boiker anymore. I use to have bith radiator and tap as in this video but tap symbol disappear, So I cannot follow this instructions. How can I bring it back and follow those instructions?
My boiler came fitted with Neomitis controls which have no provision for timed on off periods. The 'smart control' is tied to background temperature so if it's a cold night the boiler will work on the temperature differential and turn on anything up to three hours before the time you want for desired room temperature. This is all very well, but gas is so expensive that I have to resort to turning the heating control off every night and on again in the morning when I get up, this works ok but is a ruddy nuisance.
Hi Mark.. my boiler is vaillant ecofit pure. Need to pressurise but the valve is very tight and will not turn....😢..the hot water valve. Please anyway to loosen the valve so I can turn the know. Thanking you in advance
I have thus bouker but I don't have a tap sign on thw boiler anymore so I cannot follow tgise insyructions. How to make both option, tap and radiator, to c9me back 9n display.
My central heating turns itself on at all hours of the day, by itself, sometimes turns itself on at 3am. Once comfort is off, will this also stop? Thank you in advance
Us too! Our lowest temp seems to have been set by the previous owners engineers to 15°c. Does anyone know how to lower this? We don't need it st that temp when we're not in / at night.
My Vaillant ecotec plus doesn't have loads of pipes and valves underneath. Just 2 thick pipes with a blue and red big knob on the pipes.. i tried switching it the other way but nothing Happens. So how do i top it up ???
I have a EcoTec Plus 837. The rads are not getting hot enough after changing the thermostat. The flame candle on the left hand side is really low. Any ideas what it could be?
Hi mate love the video just a quick question pls in my display on my valiant boiler the radiator sign is flashing all the will heating is on is that normal?thanks
Excellent video, thank you. I had this boiler installed today along with the hive thermostat. I had to go to work with the engineers still in situ so I can’t prove if this worked. I set the boost function 45 minutes before I went home, and sure enough the heating was on. However, I can’t switch the heating off with the app or the thermostat. After watching your video, the only way I can switch it off is by setting the boiler temperature. The black radiator symbol is flashing. (As a footnote, they had to remove cupboard covers to enable a proper installation and they asked me if they would like to dispose of them. When I came home, they were still there along with much of the other waste that they should of disposed of). Your assistance would be much appreciated.
Hi, thank you for the video. I recently bought a Vaillant EcoTec plus boiler which has been set to weather dependent mode by the installer. At the moment I often have the problem that due to this setting, the temperature of the target flow is rather low which causes the room to stay half a degree below the setpoint while the pump keeps going. After a while the radiators are cold but the pump is still running because the setpoint isn't reached. Could u tell me how I can switch the control to a fixed target flow temperature like u use in the video? Thx in advance!
Hi, great video. Can you please tell us what those numbers 0,8 3,0 are under the bar pressure? ruclips.net/video/cnwJZYNQoh0/видео.html Thanks in advance.
Very concise and clear!! Thank you
Came here to find out why my heating wasn’t working and learnt a lot more in the process!!
Amazing explanation. 👏 very easy to understand, saved me calling out a plumber/ gas engineer. Thanks so much
This is excellent. Answered all my questions after 10 years of wondering how the blessed thing worked.
Vaillent is missing a trick by not using you to create its user guidance videos. You are concise, informative and simple without being simplistic. Outstanding
Compared to Vaillant’s instruction booklet which is bloated, over technical and and hard to follow.
ABSOLUTELY BRILLIANT 🎉THANK YOU my shower was set too hot when installed but have adjusted it like you say and now 🤞🤞🤞it is not too cold 😶❤️👍🤞
Very useful and informative video, and with clear presentation. Thank you.
Thank you. Just moved into a rental house with no manual 😂😂😂 you saved me
Thankyou so much for your help. It’s the Christmas bank holidays, the water pressure in my boiler flashed f22 and my home was freezing. You’ve helped us stay warm and happy 🎄🥰
Thank you for this and your other videos I have viewed, Mark. I struggled to correctly adjust and customise the settings on my boiler despite following the manual. Your precise and clear instructions and excellent accompanying videos have made the task easier.
Really clear instructions, very grateful for your help Mark
Thanks a lot. Mum had a new water tank fitted with much better insulation and now the water is too hot at the tap. I was dreading having to adjust it but this really helps.
Great advice, clear and concise. Needed to top up and your guide did the trick!
Excellent, very informative, thank you Mark.
Thank u!! My family and I are in Uk for vacations and we didn’t know what was that machine, we thought it was a freezer 🙈
Brilliant!
Super helpful.
Thanks for sharing Master!
Great video, thank you for the very clear advices! Greetings from Belgium :)
Super clear instructions. Thank You
This has been so helpful since moving into our new home, thank you - the comfort setting has been costing us and didn't even know about it. All I need to do now is find a user manual for the Danfoss RX1 box underneath it - no idea what this is for or how to use it!!!
Thank you for making this video very very useful
many thanks for an excellent informative video
Wonderfully clear explanation. Thank-you!
Thank you so much for doing this,it has been really helpful👍
You have save me time. Thanks.
We keep our central heating temperature at 50°c and it slowly heats up the house just fine, we simply had to adapt our thermostat timings so that it can have more time to get to the target temperature
Omg such a helpful video. Thanks soo much. 👏👏
Should you not always have your hot water at 50 degrees to avoid bacteria like legionnaires?
Thank you! This is so helpful :)
Excellent , and easy to understand. I have to admit, that my Vaillant ( this model ) has not been as reliable as a Rolls Royce, which is what i was told, this brand was. Regular servicing didn't seem to guarantee performance or reliability.
Great video, very useful. .I have the EcoTec Pus 418 but no comfort setting. The manual does not cover Comfort either. Looks like you dont reply to comments but if you did that would be useful . Thanks again. Easy to understand video, well presented
Thanks, very helpful!
Thanks that was very helpful
What you video didn't do very well though was give directions to the donation box!
Thanks Mark!
Great video. At night I've noticed the boiler seems to fire up every 20 to 30 minutes for 20 to 30 seconds at a time. Why is this and can you turn it off.
Super clear thanks!
How do you reduce pressure? Mine is at 3.2bar and flashing.
Amazing, thank you so much
Brilliant thank you
Very informative
yes its well explained how great 😄😄
Thank you for a good video
Great video and it help a lot to work in this boiler. Mark would like to ask you, how we can take the spanner symbol off in this boiler? Even when they are serviced or have been serviced they like to show spanner symbol and it is nightmare take the symbol off. Could you help me or us in this with One video showing the process?
Thank you very much
Thank you 🙏🏾
This is a very good video! Thanks!
I have a question. On our vaillant thermostat in our living room the display says it’s in summer mode. But if I check the boiler there is no “umbrella” summer symbol. How can I change it to winter? I can’t change it on the thermostat. Thanks in advance.
Hello how much could cost new boiler installation ...we have pump now..and pump is in second floor. we think to buy in 3 bed house with 1 bathroom vaillant eco tec 830 .we wish to do vertical output.... and do your company do installation in basildon....
Thank you...
Kind regards
Jola
I switched off the boiler on Summer. I'm confused. . Pressed button " boiler" on the wall. About setting I remember, but how switch on a gas? 😢😢😢
Thanks for this great video. I have one question about the settings though. When following your instructions on saving temperature settings, my boiler (Ecotec plus) does not display OK and cancel on the display at any time. The temperature display continues to flash after changing it. if I press the right button it just goes to the comfort setting. If I just leave it to set itself, it never does. Am I missing something?
Hello. I turned off the comfort mode.. but when I use hot water.. both the tap symbol and the comfort symbol appear on the display..
The tap logo is not showing in the left hand box, how do I fix this ?
Hello, I have a problem... once a day the maximum flame turns on and burns for a few seconds, heating the water to 80 degrees, then turns off, the temperature drops to 70 and turns on again, and so on many times in a row... and the comfort sign flashes... and I turn off the boiler... and then it works as usual...
I wanted to ask what is probably a stupid question, I usually turn the heating off, this time of year from the wall controller, how do I do that on the actual boiler??
Hey, I don't seem to have 2 handles on the bottom of my boiler, nor is there a braided wire anywhere else on the system. I can however open 2 valves with a screwdriver, but the pressure doesn't go past 0.2 bar. What am I missing?
Amazing
My valves were open for several weeks which I was unaware of .....what damage would this have done to my boiler please?
On my Vaillant system the hot water cylinder tank in separate in the garage. It’s heated by gas but is wired in also. I wanted to see the cost difference in heating on electric instead of gas but switching on the electric feed to it seems to make no difference to the gas usage. Do I need to tell the system to use electric instead of gas for the hot water?
Can anyone help, I don't have the tap Icon in the display. What do I need to do to get it back?
Us too!
Hi we have this boiler and today the heating is working but no hot water. In fact there is nothing on the left digital display. What could that be? Thanks
Mark very useful video. My problem is I've no tap icon on the display. It's nor showing and my water lukewarm. Any ideas?
Firstly it is a combination boiler? Do you have 5 pipes coming off the bottom of the boiler? if you only have 3 then you have a different boiler. You probable have a hot water tank. If so you need your boiler central heating set to 60 degrees. Also check the thermoset on the hot water tank. Should be set between 50 and 60 degrees.
This boiler is connected to a device that sends a WiFi signal to the thermostat does this burn a lot of energy?
Hey Mark, how do you bleed the hot water heater if there is too much pressure?
Hey my friend. I had a problem with low pressure but managed to sort that and increased the bar. I have hot water but no heating. My thermostat light isn't even coming on. I was thinking no water is going into the radiators.....any advice would be great
Wow very nice video you are professional engineer 😀 can you please kindly help me on my vaillant ecotec plus 837 R1 on central heating the boiler does on go on low flame at all ? It's just goes to high flame 🔥 and cuts out to the set heating temperature ie 60°C and cuts out then the temperature drops down to 34 °C and then its start again its keep on doing this the central heating system works fine and the radiator gets hot but the boiler is not going to the low flame? Please kindly help me on this issue waiting for your reply Thankyou
Very knowledgeable video very well explained we t have this boiler but it seems to take an age to heat our radiators up the digital temperature numbers take an age to climb is there a reason or this our friends have the same and it heats up in no time its like our boiler stops and starts constantly can you give any advice please .
I don't have a tap symbol on my boiker anymore. I use to have bith radiator and tap as in this video but tap symbol disappear, So I cannot follow this instructions. How can I bring it back and follow those instructions?
My boiler came fitted with Neomitis controls which have no provision for timed on off periods. The 'smart control' is tied to background temperature so if it's a cold night the boiler will work on the temperature differential and turn on anything up to three hours before the time you want for desired room temperature. This is all very well, but gas is so expensive that I have to resort to turning the heating control off every night and on again in the morning when I get up, this works ok but is a ruddy nuisance.
Hi Mark.. my boiler is vaillant ecofit pure.
Need to pressurise but the valve is very tight and will not turn....😢..the hot water valve.
Please anyway to loosen the valve so I can turn the know.
Thanking you in advance
When I went to change the temperature of my water. It said it was turned off. Is that normal? Its a new boiler we have never changed the temperature
I have thus bouker but I don't have a tap sign on thw boiler anymore so I cannot follow tgise insyructions. How to make both option, tap and radiator, to c9me back 9n display.
My central heating turns itself on at all hours of the day, by itself, sometimes turns itself on at 3am. Once comfort is off, will this also stop? Thank you in advance
Us too!
Our lowest temp seems to have been set by the previous owners engineers to 15°c.
Does anyone know how to lower this? We don't need it st that temp when we're not in / at night.
Hello, i have the eco plus the same model as this but i have to put water on it every day cause always the water finish... what i can do ?
On my Home Screen I have my central heating symbol how do I get rid of it it’s an eco pure fit. My water is stone cold
I have a Vaillant eco tec plus 418 . It only has one tap , how do I set about balancing it ?
My Vaillant ecotec plus doesn't have loads of pipes and valves underneath. Just 2 thick pipes with a blue and red big knob on the pipes.. i tried switching it the other way but nothing Happens. So how do i top it up ???
Hi, good video. Can you please explain how to decrease the water pressure?
When I press the radiator button the display goes straight to pressure and doesn’t allow changed to the heating temperature, why is this?
I have a EcoTec Plus 837. The rads are not getting hot enough after changing the thermostat. The flame candle on the left hand side is really low. Any ideas what it could be?
Hi there. My boiler fails to start. Can you help?
Hi mate love the video just a quick question pls in my display on my valiant boiler the radiator sign is flashing all the will heating is on is that normal?thanks
Mine don’t have a tap
Hi Mark, any ideas about why my thermostat keeps working or not working - even after new batteries ? Eco tec plus 837 boiler model.
Excellent video, thank you. I had this boiler installed today along with the hive thermostat. I had to go to work with the engineers still in situ so I can’t prove if this worked. I set the boost function 45 minutes before I went home, and sure enough the heating was on. However, I can’t switch the heating off with the app or the thermostat. After watching your video, the only way I can switch it off is by setting the boiler temperature. The black radiator symbol is flashing. (As a footnote, they had to remove cupboard covers to enable a proper installation and they asked me if they would like to dispose of them. When I came home, they were still there along with much of the other waste that they should of disposed of). Your assistance would be much appreciated.
I have a Victorian house terrace house and 65 wasn't cutting it. Do I have to fiddle with it to 70 or 67 or something...
How do you change mode on a Vaillant ecoFIT pure 618 non combination boiler ?
Than6❤
Hi, thank you for the video. I recently bought a Vaillant EcoTec plus boiler which has been set to weather dependent mode by the installer. At the moment I often have the problem that due to this setting, the temperature of the target flow is rather low which causes the room to stay half a degree below the setpoint while the pump keeps going. After a while the radiators are cold but the pump is still running because the setpoint isn't reached. Could u tell me how I can switch the control to a fixed target flow temperature like u use in the video? Thx in advance!
What happens when you don’t have the handles because mine has none
How do u stop the egg timer coming on
I keep getting f23 when I use the hot water it’s driving me mad
What is the ! F75
Does suport opentherm?
Could you help me how to reduce the pressure. Mine shows 2,7 bars
When showing 2.7 is that when your heating is on or off ?
I get the heater on and no hot water. Can anyone help
But I came here to see why I've got very high pressure, like almost maximum, how to reduce it
Same problem, why explain how to increase pressure without explaining how to reduce it?
I have the same problem it was 3.6, just bled a heater and reduced it down to 3.0
Now my boiler makes a noise when any hot water tap is turned on
@@tapen678s6 did you solve a problem? I have also high pressure but a i dont know why its hapening?
@@azathioprine3852 there is a expansion valve inside the boiler I took some air out 👍
my tap icon has dissapeared any ideas
Same
Same
F28 fault?
Hi, great video. Can you please tell us what those numbers 0,8 3,0 are under the bar pressure? ruclips.net/video/cnwJZYNQoh0/видео.html
Thanks in advance.
I was hoping to say thanks but your Vaillant eco tec plus is *not* like ours! 🤔 so it doesn't help!!
Vaillant rather than vailliant😂
The worst boiler ever. Every year for 5 years it takes days to turn the heating off.. Please re-invent the on and off switch.
Very useful and informative video, and with clear presentation. Thank you.
Tap sign is blinking on the display.What does that mean?