Not a lot of people will tell you, your pinion shaft needs to be at the same angle as your Transmission/transfer case Pinion. Doesn’t matter your drive shaft angle. , you might go through u-joints quick with a steamer angle. As long as your Pinion shaft in your transmission shaft same angle good to go.
some "just for giggles", if the bracket over the axle is used to axle mount the steering servo, the peculiar bump steer would be gone real quick. with a servo Y harness, could slap a front axle in the rear, to steer half as much as the front by linking shorter on the servo arm, without going crazy with a full on 4 mode 4 wheel steering setup. maybe advantageous for crawling?
i was gonna install the 2xN30 motors to solve it today.. after struggling with soldering the motor wires i finnally connected it to the esc and connected the battery but when i push the throttle... nothing happends to the motor, but magic smoke comes out the esc.. i gave up for today..
Not a lot of people will tell you, your pinion shaft needs to be at the same angle as your Transmission/transfer case Pinion. Doesn’t matter your drive shaft angle. , you might go through u-joints quick with a steamer angle. As long as your Pinion shaft in your transmission shaft same angle good to go.
some "just for giggles", if the bracket over the axle is used to axle mount the steering servo, the peculiar bump steer would be gone real quick. with a servo Y harness, could slap a front axle in the rear, to steer half as much as the front by linking shorter on the servo arm, without going crazy with a full on 4 mode 4 wheel steering setup. maybe advantageous for crawling?
I made a 4 wheel steer by just switch everything from the back to what's in the front and using channel meshing and channel reversing to crab walk
awesome upgrades man! i have the same problem with the driveshaft rubbing on the motor.. it dont run well..
Gordo RC thinking about it all day lol....
i was gonna install the 2xN30 motors to solve it today.. after struggling with soldering the motor wires i finnally connected it to the esc and connected the battery but when i push the throttle... nothing happends to the motor, but magic smoke comes out the esc.. i gave up for today..
Gordo RC wow more fun
Is that just a massive kit of parts??
Yes i ordered through taobao.com with the help of a chinese friend.
Dam how do I get me one?
I just went to taobao.com and ordered multiple parts amd had them sent to me. But i got lucky a man over in china filled my order info for me
Where are the axles + driveshafts bought?
Aliexpress.com or banggood.com
Ok Thanks For Information
Ok I painted my diffs covers and now my truck is going slow and binding when i give it any throttle can anyone help
Show,,,,,,,,,,,
Show? What you want to show. Lol
@@supastihl89 Parabéns gostei muito,,,,,,,,
Looking good man! Btw where did u get those shocks?
Eddy A aliexpress but they're too small. Actually lowers it lol
.... go to sleep man!
I swear you are talking to me right now. LOL