Can this gearbox support the Heng Long 1/16 Tank motor or is it too small?, because I get no answer anywhere else and I'm looking for a motor with speed and torque.
Here is finally our solution: www.banggood.com/URUAV-WPL-1Set-Original-Metal-Gears-For-Speed-Change-Gear-Box-B1-B24-B16-B36-C24-116-4WD-6WD-Rc-Car-p-1464398.html?rmmds=myorder&cur_warehouse=CN
A lot of folks upgrade the drive shafts to the metal upgrade parts that are sold on ebay, bangood, etc. I'm awaiting delivery of mine- the plastic ones bind and pop and strip out easily.
I had problems with this engine, the front tires go backwards and the rear tires go forward. I do not know if my remote control will be unconfigured. Does anyone know a solution?
Looks like a FlySky FS-GT3C. 3rd channel is just on/off, so the placement of the connector between the shifting servo and the gear selector shaft has to be set, but that's quick and easy
it does need more grease in there
That was the video I needed to see! Thankyou.
So in order to run the two speed box I have to upgrade my controller and receiver also?
Good job, thanks for showing!
Hi thanks for showing inside of the gearbox, do we have grease the gear ?
I think you have to add your voice to quickly grow your channel
Nice video! What battery should I use with the 2 speed gearbox? Using a 30A esc with jst plug.
What is that button on the radio called?
Don which do you think is better the two speed diff in ur video or the big aluminum three gear diff
Can i use 180 or 370 motor with Standart Esc?
Thanks for showing us this :-)
Can you tell what ( by proximaty ) the ratio is between the 2 speeds?
Can this gearbox support the Heng Long 1/16 Tank motor or is it too small?, because I get no answer anywhere else and I'm looking for a motor with speed and torque.
Nice video but I hate the plastic gear Box,because mine b36 broken it's so much power of motor 180 or 370
Here is finally our solution: www.banggood.com/URUAV-WPL-1Set-Original-Metal-Gears-For-Speed-Change-Gear-Box-B1-B24-B16-B36-C24-116-4WD-6WD-Rc-Car-p-1464398.html?rmmds=myorder&cur_warehouse=CN
Che telecomando usi ?
This video is very cool !!!
whether the first gear is stronger than the transmission in a standard box?
Hi, do you know the current (mA) consumption of this motor at high speed ? thanks
My Speedbox its diferent not shippen the arms with servo
Do you upgrade the battery to?
Do you have to buy different driveshafts? I got one of these but all videos show a different style drive shaft than stock.
A lot of folks upgrade the drive shafts to the metal upgrade parts that are sold on ebay, bangood, etc. I'm awaiting delivery of mine- the plastic ones bind and pop and strip out easily.
Big heavy duty gears !
Good video bro
I just use a 2speed gearbox to my c24, but when i press the throttle it goes on reverse intead of going forward. is that normal in 2speed?
No. You need to change + and - on the motor
I had problems with this engine, the front tires go backwards and the rear tires go forward. I do not know if my remote control will be unconfigured. Does anyone know a solution?
Maybe wrong installation of the axle gears?
turn one of the axle housings around 180*
What is the remote control called? And you just have to do that as in the video or do you have to do something else?
Looks like a FlySky FS-GT3C. 3rd channel is just on/off, so the placement of the connector between the shifting servo and the gear selector shaft has to be set, but that's quick and easy
how to control the lights if the gearbox goe to the 3rd channel? tnx
He isn't using the original radio
+Filipe Santos thanks,
Can i replace the motor with brushless with the same diameter?
Yes, it should work.
Is there an angle limit on servo?
It's a - 45/0/+45 degree servo
Dont change gear in full speed man.. Easy to strip the gears then..
Show,,,,,,,,,
You need to talk
Gear for plastic..
is lower speed reduction or add faster speed than original?
Both! The first gear is slower and the second is faster.
Show,,,,,,,,,,