"Thanks for watching"... Man, thanks for letting us watch! That was such a pleasure to bear witness to. Amazing attention to detail and so professionally finished. I'm going to give it a whirl tomorrow using some scrap MDF, with my blunt, rusty, tenon saw, my square which isn't quite square, and sat on my kitchen floor tiles with no vice or clamps. Wish me luck :)
Nice. Functional and elegant design. I'll just make the fence for vertical operation in the other end. Think it's safer when the band is running downwards. Have to figure out how to operate the switch, though. Will definitely build this.👍
This has so many features that are incredible. I also love the idea that the sander can easily be removed and used at it was designed as well. I may have to watch this several times if I decide to do this with my Craftsman Pro :)
definitely the best design I've seen on this concept. 3 in 1....or 4 in one because you still are able to use the belt sander as it was originally intended.
Very nice video with very good ideas! a little tip that could help you and make your sandblaster more efficient and safer: change the last end support; the sanding belt must always go down when sanding.
This looks so amazing! I really like it when people make their own DIY tools to assist with their DIY projects :) Thanks for sharing :) Make more video! It even have movable elements to it. You definitely have a talent :)
Meus parabéns! É o único vídeo que vale a pena copiar ,porque você mostrou os problemas que podem acontecer durante o processo! Sua humildade conquistou mais um inscrito!
Hi Eric! 4 years since you publish this video and it's still has the best ideas for sandbelt jig! Really good ideas in the video. I will apply them for my green PBS75 E. Tell me something, in order to make the sun belt with the cord down, is it enough that I just make the plan "mirror -like", or there are some technical issues (the machine construction?), that I have to take into consideration? Thanks for your comments.
Thx! With the cord down, I assume that by cord down, you mean using the jig in vertical position. If so, simply extend the length of the jig so that the cord doesn't go in the way, if it makes sense.
Very slick my man! Been needing to build something like this. Tired of laying the belt sander down, holding it with one hand while I accidentally sand my fingertips with the other hand.
Similar I'd say, but his jig requires to attach the belt sander for good, which prevents him from using his tool on the go! Anyway, his video is mentioned in the video description, as well as a few others, so that viewers get plenty of inspiration to build a stand of their own.
TY! I use my belt sander without the jig quite often, so I wanted to be able to release it from the jig in a couple seconds. that's the main reason why I built it this way.
Is it possible that your video is somehow backwards? When you have the sander upright with the cord coming out of the top, that should mean your belt is moving upwards toward the electrical cord from the side where we can see it. That is how all of them operate. But in your video it looks as if the belt is moving away from the cord, in the opposite direction. Am I perceiving that correctly?
Actually, the belt moves upward, meaning I should have built this jig with the belt sander upside down (and the cord coming from the bottom)! I As a result, I only use this jig in the 1st and 2nd positions.
Hey Eric. First of all thank you for sharing ths great idea. :-) But are you still happy with the green Bosch sander? I'm a little suspicious if it's long lasting or not when using it often (besides the one in blue). So what's you're expirience after all? Greetings from Vienna
Hi Stefan, for the price, it's a good little belt sander. The belt inside broke once, but it was my mistake. Other than that, no problem. I use it often, but not intensively. Should I need to use a belt sander on a daily basis, I'd go for a Makita 9403, much more powerful, but also 2.5x more expensive!
самый оптимальный вариант..я так сделаю...сделал а ленту наждачную как менять..гавно проект надо все переделывать..время и материал перевел..люди не не делайте так..она еще и в верх жопой..гавноляп..как всегда показуха..
This is not "an how" to video and it is for inspiration only. I'm not a pro and if I can do what I do, I feel that any motivated DIYer should be able to do the same, or even better. I build stuff on the go when I need something and I make mistakes, that's how I make progress! And that's why you'll probably never see any detailed how to videos here or any available plan of what I did on this channel. There are plenty of them elsewhere on RUclips and on the web anyway. Thanks for sharing your thoughts though...
"Thanks for watching"...
Man, thanks for letting us watch!
That was such a pleasure to bear witness to.
Amazing attention to detail and so professionally finished.
I'm going to give it a whirl tomorrow using some scrap MDF, with my blunt, rusty, tenon saw, my square which isn't quite square, and sat on my kitchen floor tiles with no vice or clamps. Wish me luck :)
Thanks and good luck ;-)
Nice. Functional and elegant design. I'll just make the fence for vertical operation in the other end. Think it's safer when the band is running downwards. Have to figure out how to operate the switch, though.
Will definitely build this.👍
This has so many features that are incredible. I also love the idea that the sander can easily be removed and used at it was designed as well. I may have to watch this several times if I decide to do this with my Craftsman Pro :)
The most professional stand out there.
Excellent work!
Best Vid on the Tube for making a belt sanding a truly useful tool. Thank you and keep broadcasting!!
definitely the best design I've seen on this concept. 3 in 1....or 4 in one because you still are able to use the belt sander as it was originally intended.
Very nice video with very good ideas! a little tip that could help you and make your sandblaster more efficient and safer: change the last end support; the sanding belt must always go down when sanding.
Thanks for the advice, it makes sense!
Very versatile and portable box! love it!
Nice fabrication. It was done in a very logical and methodical fashion.
great utility value of this 3 in 1 belt sander.
Very good idea. Thanks for the video.
This looks so amazing! I really like it when people make their own DIY tools to assist with their DIY projects :) Thanks for sharing :) Make more video! It even have movable elements to it. You definitely have a talent :)
Been looking for a good jig for my belt sander. This is definitely the best inspiration yet! :) Great work!
What is the a great way to design. Really good, congrats...
Very cool! I can see how that would come in handy! I might have to borrow this design from you. Thanks for sharing
It looks like this video is made for me, because I've got the same bosch PBS 75 AE Belt sander!
Also GREAT job! :D
Damn I love this, I already built one and don't know how I wound up here but I'm copying your modifications. Great Video.
Meus parabéns! É o único vídeo que vale a pena copiar ,porque você mostrou os problemas que podem acontecer durante o processo! Sua humildade conquistou mais um inscrito!
Hi Eric! 4 years since you publish this video and it's still has the best ideas for sandbelt jig!
Really good ideas in the video. I will apply them for my green PBS75 E.
Tell me something, in order to make the sun belt with the cord down, is it enough that I just make the plan "mirror -like", or there are some technical issues (the machine construction?), that I have to take into consideration?
Thanks for your comments.
Thx! With the cord down, I assume that by cord down, you mean using the jig in vertical position. If so, simply extend the length of the jig so that the cord doesn't go in the way, if it makes sense.
Very slick my man! Been needing to build something like this. Tired of laying the belt sander down, holding it with one hand while I accidentally sand my fingertips with the other hand.
Vero good project! Gonna make me own with my belt sander!
Should have watched your video a view days earlier. Your solution is much better than mine... I like!
great ideas put into practice.well done & thank you.
Real good build thanks for the idea
What is the piano hinge for? Did I miss something? At 5:04
Very clever!
Looks like the Humus Workshop stand!
Similar I'd say, but his jig requires to attach the belt sander for good, which prevents him from using his tool on the go! Anyway, his video is mentioned in the video description, as well as a few others, so that viewers get plenty of inspiration to build a stand of their own.
Excellent. A work of art!
Thanks!
Great Video brother. I like ther versatility of the design
Thanks bro!
Good job and inspiring but:
Why do not you use the threaded holes in the base of the tool to fix it to the wood?
I think it would be easier
TY! I use my belt sander without the jig quite often, so I wanted to be able to release it from the jig in a couple seconds. that's the main reason why I built it this way.
LO MEJOR PARA LIMPIAR LA LIJA ES UN TROZO DE METACRILATO Y LA SINTA FUNCIONANDO VA PERFECTO QUEDA COMO NUEVA
The belt sander is most useful when it’s an edge sander. I did similar to you recently. But you have gone 2 better.
Great Job!
nice work man!
Excellent Thanks!
Waiting for your third video !! 😏 And i subscribed !! 🙋
Thanks! 😀
What's the use of the piano hinge ?
Change the position of the belt sander
It is an absolute shame that that Bosch belt sander is no longer available in the United States!
Nice work!
TY!
Thanks for this video,,,,awesome,,
Very imaginative!
where can I buy those hex bolt nuts that goes into the wood? he uses it for the screw of the handle in the 8:03 minute of the video
Look for threaded insert nuts on Amazon or wherever you shop!
Awesome!
Hi, what do you call that tube vertical up and down action sander?
An oscillating spindle sander.
Is it possible that your video is somehow backwards? When you have the sander upright with the cord coming out of the top, that should mean your belt is moving upwards toward the electrical cord from the side where we can see it. That is how all of them operate. But in your video it looks as if the belt is moving away from the cord, in the opposite direction. Am I perceiving that correctly?
Actually, the belt moves upward, meaning I should have built this jig with the belt sander upside down (and the cord coming from the bottom)! I As a result, I only use this jig in the 1st and 2nd positions.
Great work!!!
Nice one👍👍👍
Hey Eric. First of all thank you for sharing ths great idea. :-) But are you still happy with the green Bosch sander? I'm a little suspicious if it's long lasting or not when using it often (besides the one in blue). So what's you're expirience after all? Greetings from Vienna
Hi Stefan, for the price, it's a good little belt sander. The belt inside broke once, but it was my mistake. Other than that, no problem. I use it often, but not intensively. Should I need to use a belt sander on a daily basis, I'd go for a Makita 9403, much more powerful, but also 2.5x more expensive!
@@HODYODesign Thanks very much for your answer. :-)
Are detailed drawings available
I'm afraid not
dear sir,
What grain of sandpaper do you use? I use P60.
+Gregory Van der Auwera Most of the time 80 grit, as it's more forgiving.
which brand of belt sander is it ?
Bosch PBS 75
👏👏👏👏👏👏👏👏👏👏👏👏👏
Nice. 👍👍👍
Dang. Here I thought clamping it down was good enough .. I have been proven very, very wrong.
LOVE IT 😍
Super!!!
Все хорошо. Но зачем так много всего городить чтобы закрепить. Там на крышке есть 2 отверстия для болтов 6мм можно спокойно прикрутить и все.
В таком случае ( с болтов), если хочеш използоват как мобильний, практически трудно. Закрепи, открепи, закрепи, открепи...😅
viel zu viel Aufwand! aber hast du fein gemacht ;)
I love
I like more Music 👍
❄️Coool❄️
It Would Be Nice If You Could Have Left The Plan's, Just My Two Cent!!!
Yeah, it would have been nice! Unfortunately, I build stuff on the go and I'm definitely not a guy who makes plans 😐
+1
самый оптимальный вариант..я так сделаю...сделал а ленту наждачную как менять..гавно проект надо все переделывать..время и материал перевел..люди не не делайте так..она еще и в верх жопой..гавноляп..как всегда показуха..
Nice video but too fast and with no guidance for any amateur DIYer who doesn’t have the know how... duh!
This is not "an how" to video and it is for inspiration only. I'm not a pro and if I can do what I do, I feel that any motivated DIYer should be able to do the same, or even better.
I build stuff on the go when I need something and I make mistakes, that's how I make progress! And that's why you'll probably never see any detailed how to videos here or any available plan of what I did on this channel. There are plenty of them elsewhere on RUclips and on the web anyway. Thanks for sharing your thoughts though...