LC1 is Leak Code sensor 1 you have a leak some were on the right side of the washing machine. Maybe you used Too Much soap in it over sudded or you overloaded your machine and water pushed out through the main gasket.
Problem solved! As @theapplianceguru mentioned there was a small leak. I removed the back cover and inspected the inside, looking for some humidity. I dried the inside of the washing machine with an hair drier, and cleaned the leakage sensor (it's screwed on the bottom). I found out that part of a sock was coming out from the front door, compressing the gasket...so the washing cycle started and the leak happened! But, one year ago, same problem because I poured too much soap. Anyway it's a good practice to wipe the front gasket and clean the filter from time to time. Note: I uploaded this video by mistake and I'm finding out just know I have 50k views and 100 likes. Maybe the google alghorithm needs me XD
Yes! Opening the machine and using a blow dryer with paper towels worked for me! Bear in mind, you might not see actual water but might feel some moisture especially around the censor (located as explained in the main comment). Dry, dry and dry some more! Those censors or VERY sensitive! I was at the verge of calling a tech after 24hrs of error codes and me attempting to tilt my machine to no avail...then this worked!
hey Pablo, see the pinned message please. And remember to clean the flood sensors on the bottom of the washing machine (with alchool ofcourse, or isopropanol, not WATER! XD), this could do the trick!
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
LC1 is Leak Code sensor 1 you have a leak some were on the right side of the washing machine. Maybe you used Too Much soap in it over sudded or you overloaded your machine and water pushed out through the main gasket.
How can you fix it in a situation like this
Ija imam isti problem kako daga sredim
Hey guru, that's completely accurate! Thanks!
Problem solved! As @theapplianceguru mentioned there was a small leak. I removed the back cover and inspected the inside, looking for some humidity. I dried the inside of the washing machine with an hair drier, and cleaned the leakage sensor (it's screwed on the bottom). I found out that part of a sock was coming out from the front door, compressing the gasket...so the washing cycle started and the leak happened! But, one year ago, same problem because I poured too much soap. Anyway it's a good practice to wipe the front gasket and clean the filter from time to time.
Note: I uploaded this video by mistake and I'm finding out just know I have 50k views and 100 likes. Maybe the google alghorithm needs me XD
👏🏼👏🏼 good job! I'm glad I could help
Yes! Opening the machine and using a blow dryer with paper towels worked for me! Bear in mind, you might not see actual water but might feel some moisture especially around the censor (located as explained in the main comment). Dry, dry and dry some more! Those censors or VERY sensitive! I was at the verge of calling a tech after 24hrs of error codes and me attempting to tilt my machine to no avail...then this worked!
It would scare the crap out of people if they are programming the washer
Neynemey olar?
My Samsung washing machine after 3 years is now f*cked up and threw me this error code and this happened a half an hour ago
@@blu_subwoofer6714 hey 👋, follow the comments we wrote a fix. It is an easy DYI no need for an expansive service
@@vincenzolocicero3535 it’s now fixed after a couple hours of constant beeping. We had to wait for all of the soap to go away.
Onlarin hamsina baxmışam yaxsidi hecne olmayib amma LC1yazilib
Menimkide bele olur neyniyim
LC1 neter samsungda duzelir
A mi me tira error LE 1 ,que puede ser ya revice todo
hey Pablo, see the pinned message please. And remember to clean the flood sensors on the bottom of the washing machine (with alchool ofcourse, or isopropanol, not WATER! XD), this could do the trick!
Su getmiyur hava vurun açılacak
Did you buy a new one?
nope! I fixed the problem (lucky me)
@@vincenzolocicero3535 what was the problem
@@martinc2038 Hi martin. There was a small leak and the washing progam stopped showing LC1 error on the screen.
@@vincenzolocicero3535 oh I see
@@vincenzolocicero3535 do you still have this machine
What model is this washing machine?
Hey! Samsung WD80J6400AW 8.0 kg / 6.0 kg . It's a combi washer and drier.
My washing machine giving LE2 error how I can solve this issue
Hola q como puedo arreglar porq en mi lavadora también sale igual
Hello Jorge. I removed the back cover (remove the socket first!!! dont get electrocuted
Wtf bro
It Seems girls are falling for DIY men 🤣♥️
how did you fix it?
Hey @slick, please see the pinned message on top.
Ha nno ancora Lo stesso numero die telefono ,,,,richiamami,,
Ciao Marita! Credo tu mi abbia scambiato per una altra persona. Ad ogni modo, grazie per i commenti, ti auguro tanta felicità.