IK Multimedia iRig Pre 2 Unboxing

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024

Комментарии • 30

  • @artem.boldariev
    @artem.boldariev 7 месяцев назад

    Will the headphone passthrough work when the device is switched off?
    You seem to be a bit unprepared, but you have shown the device capabilities on real examples. Thank you!

  • @foxuae03
    @foxuae03 3 года назад +1

    Thank you for the video 🤘🏼

  • @ciekaweurzadzenia
    @ciekaweurzadzenia Год назад +1

    I use this device daily for streaming with my Samsung smartphone. I have a problem with fast-discharging AA batteries. Can I power this device with a 3.7V Lithium Ion battery instead of the original 3V battery?

    • @GreenBoxMedia
      @GreenBoxMedia  Год назад

      No idea, thats a question for the support.

  • @KevvyTheKat-fj6fo
    @KevvyTheKat-fj6fo Год назад +1

    😂 so pissseeed I just watched this!

  • @DJViBE23
    @DJViBE23 3 года назад

    Thank you for the video.

  • @puneetgupta4483
    @puneetgupta4483 Год назад

    One of the rare videos I have watched from start to end. Does it connect to a windows laptop. I have narrowed it down to irig pre 2 and zoom u22 and ability to connect to my laptop would be an important consideration.

    • @GreenBoxMedia
      @GreenBoxMedia  Год назад +1

      The iRig can connect to any device that has a headphone/mic jack.
      If you are looking for a Audio interface that connects to a PC using USB this is not the right device for you.

  • @Theswissgames2000
    @Theswissgames2000 3 года назад

    Woop woop!

  • @davianberry528
    @davianberry528 2 года назад

    Hey bro, how do you switch between cameras and what cameras are you using?

    • @GreenBoxMedia
      @GreenBoxMedia  2 года назад

      This video isn't touching on any camera stuff. You find all my camera gear here: kit.co/Greneey/youtube-desk-setup-2021
      I most likely used the Elgato Stream Deck

  • @Pateshwari_Singh
    @Pateshwari_Singh 3 года назад

    Sir, I have a Yamaha mg10xu mixer, Road nt1a microphone and Beyerdynamics DT 770 Pro 80 ohm headphone. I want to use the Star Maker app, Smule with the help of all these. Please specify the setup so that real time voice monitoring can be done with zero latency. If I need to buy any other equipment for this, please also mention it.

    • @frankluo230
      @frankluo230 2 года назад

      Mg10xu has line output to a class compliant audio interface then you should be good to go. Audient evo4 is $100, SSL2 or id14 is $230

  • @toddlichtenwalter2041
    @toddlichtenwalter2041 3 года назад

    How does this compare to the iRig HD which cost twice as much as the iRig Pre 2?

    • @GreenBoxMedia
      @GreenBoxMedia  3 года назад +1

      I don't have an HD to do a 1:1 comparison, but the main difference is that the HD interfaces digitally while this one analog through a 3.5 mm jack.

    • @toddlichtenwalter2041
      @toddlichtenwalter2041 3 года назад

      @@GreenBoxMedia Thanks, I will go with the iRig Pre2. Super helpful videos!

  • @RoelskiTV
    @RoelskiTV 3 года назад

    can a live reporter in the field (calling the radiostudio) use this with his Rode Reporter microphone?
    We do not want recording on the smartphone, we only want to use it for realtime reports and live broadcasting on the station.

    • @GreenBoxMedia
      @GreenBoxMedia  3 года назад

      I do not have a Rode Reporter Microphone to verify it, however based on what I can read online about the microphone yes that would work.

  • @jamestheradioman
    @jamestheradioman 3 года назад

    Why does the XLR socket wiggle? Seems like there's too much movement in the female XLR socket when you connect mic 🎤 cable. Is there a reason for that? Or is it a defective structural issue?
    5:40 into the review video below demonstrates unstable XLR socket
    t.co/FSZfGWIjGp

    • @GreenBoxMedia
      @GreenBoxMedia  3 года назад

      Hey there. I have not noticed that before so I went back to test it. You are right there is some wiggle to it, however its wiggle between the Housing and the Socket. The Socket itself fits perfectly with the cable.

  • @rtholman83
    @rtholman83 2 года назад

    How do I do reverb whole live streaming

    • @GreenBoxMedia
      @GreenBoxMedia  2 года назад +1

      You need either a hardware reverb generator before the irig or some sort of app that allows for this.

    • @rtholman83
      @rtholman83 2 года назад

      @@GreenBoxMedia the IRIG has downloadable apps for reverb, but the effect turns off when I switch to live streaming app. Bigo

    • @GreenBoxMedia
      @GreenBoxMedia  2 года назад +1

      Then you need a hardware reverb generator.

    • @rtholman83
      @rtholman83 2 года назад

      @@GreenBoxMedia thanks

  • @rodneyhenson
    @rodneyhenson 3 года назад

    wow, so confusing, what is this supposed to be used for?

  • @RenRen2577
    @RenRen2577 2 года назад

    Good video thanks..but how do I go from mic to my TC Helicon vocal pro and then out to my BoseL8Pro. Is this possible?