i replaced the display and it wors (shows everything correctly) but the touchscreen does not work. Which connections are important? Is it only the big connection next to the power plug in which is relevant ?
Does The Lower Speaker Act As The Mic During Calls? People Can Barely Hear Me When I Talk To Them During Calls And I'm Trying To Figure Out What Needs Replacement.
i recently replaced the front screen and digitizer on my z3+ with care and using the right tools however now the screen will not come on. the LED lights up when charging and the phone vibrates when i switch on, plus if i leave it for a time i get the notification led light up but still no picture. Do you have any ideads what it could be?
and why it doesnt have metal shields on the mother board? unlike on z2 and z3. i also watched another tear down of this. and his z3 plus motherboard has a metal shield. why is that?
+John Roy Vincent Santos Surely there is metal shield on the mother board. We just tear it down to get more information to the motherboard. Sorry to cause misunderstanding.
Hi bro can you tell me E6533 Z4 Power IC number Model ...so I Can Buy .....My City ....Customer Z4 mobile is Short power Ic Heat .so I Can Remove And New IC buy AND FIX IT ....
Very interrsting. And after that everybody tells that snapdragon 810 is hot. Under mother board Sony has inserted heatpipe, but on it was installed kapton tape, which reduce heat dissipation to almost zero. There I would believe we need to put non conducting thermal paste. Somehow your phone do not have emi shield on the processor, it was left open.
Any idea what is wrong with my xperia Z3 plus? i dropped it and the screen was totaled, phone was still on until i switched it off. i ordered new lcd and digitizer and installed em. Now when i try to start the phone it won't start, no light or anything is seen even when i put it on charger. only thing that heats in the phone is the chip that is connected to phones vibrator motor + motor heats too. they both are very hot to touch and start doing that as soon as i connect the battery. i'm quite baffled.
Nice Guide! But please consider not rotating the phone through the entire video. Thats very confusing, even if you know where you are working on the phone
BEAWARE. If you are only replacing your screen DO NOT follow this video, you will break your phone, for sure. Follow a video that doesnt take appart the ribbons going to the main board.
yeah, this is more of a teardown than a screen replacement guide because I didn't need to remove all those to replace the screen. It's all unnecessary work.
Is a pcd signal card a phone signal generator? Without that, you have no telephone signal?
how to remove port simcard sir ?? thx
i replaced the display and it wors (shows everything correctly) but the touchscreen does not work. Which connections are important? Is it only the big connection next to the power plug in which is relevant ?
Does The Lower Speaker Act As The Mic During Calls? People Can Barely Hear Me When I Talk To Them During Calls And I'm Trying To Figure Out What Needs Replacement.
i want main flex with vibration you know from where I can buy this thing?
Hello friend a question ... the back cover is damaged when removing ?? I would have to buy another? or you can use the same?
is it still waterproof if i do the full set screen replacement
How many sensors of wet has this smartphone?
from where should i buy sony xperia z3+ screen
Is it match with sony z3v
it is water proof after the repair???
no.... that thing/feature die in the same moment you open the device
Question?
Is it that Necessarily to Start from the Back Part and remove Every Component?
Just to Change LCD
No
Thanks. My Z4 screen is waterlogged. Unbelievable as I only just rinsed it quickly under a tap.
where are the heatpipes of the z3+?
+John Roy Vincent Santos Plz watch the video at 6;15, there is the heatpipe under the motherboard.
+Wit Rigs oh thank you
Is it harder to tear down z3+ then other flagship phones?
+Amir Amran It depends on your repair experiences.
Helo sir..can u help me..my z3+ wont turn on..when i watching utube suddenly death ..pls help me
i recently replaced the front screen and digitizer on my z3+ with care and using the right tools however now the screen will not come on. the LED lights up when charging and the phone vibrates when i switch on, plus if i leave it for a time i get the notification led light up but still no picture. Do you have any ideads what it could be?
+Chris Phillips Please make sure that you connect lcd connect well, if it is good, then there must something wrong with your lcd screen.
and why it doesnt have metal shields on the mother board? unlike on z2 and z3. i also watched another tear down of this. and his z3 plus motherboard has a metal shield. why is that?
+John Roy Vincent Santos Surely there is metal shield on the mother board. We just tear it down to get more information to the motherboard. Sorry to cause misunderstanding.
+Wit Rigs thank you for the response.
Get Original Replacement Parts For Sony Xperia Z3+ : witrigs.com/d3tz3
Hello, thanks for your video! I want to ask, if I do a repair with this phone will it remove the water-resistant capability?
No, it will not be water resistant after repaired, if you wanna take it to swimming pool, a water case would be recommended.
Great videos, u have got a new subscriber... ;)
If u have got ur LCD replaced from Sony Service then does the waterproofing remains...??
No
holy shit this music made me cut the digitizer ribbon cable! badump bump, badump bump. bing bing bing... arrrrgh!!
Hi bro can you tell me E6533 Z4 Power IC number Model ...so I Can Buy .....My City ....Customer Z4 mobile is Short power Ic Heat .so I Can Remove And New IC buy AND FIX IT ....
Thank you for the great video.. Really needed the help.. Liked and subscribed
Gracias, acabo de reparar mi celular
very helpful .thanks.
thanks for tutorial
Very interrsting. And after that everybody tells that snapdragon 810 is hot. Under mother board Sony has inserted heatpipe, but on it was installed kapton tape, which reduce heat dissipation to almost zero. There I would believe we need to put non conducting thermal paste.
Somehow your phone do not have emi shield on the processor, it was left open.
Any idea what is wrong with my xperia Z3 plus? i dropped it and the screen was totaled, phone was still on until i switched it off. i ordered new lcd and digitizer and installed em. Now when i try to start the phone it won't start, no light or anything is seen even when i put it on charger. only thing that heats in the phone is the chip that is connected to phones vibrator motor + motor heats too. they both are very hot to touch and start doing that as soon as i connect the battery. i'm quite baffled.
Nice Guide! But please consider not rotating the phone through the entire video. Thats very confusing, even if you know where you are working on the phone
Repair LCD for Sony Xperia Z3+ Dual ???!!!
Top! Thankyou
hi
BEAWARE. If you are only replacing your screen DO NOT follow this video, you will break your phone, for sure. Follow a video that doesnt take appart the ribbons going to the main board.
Just decided NOT to replace the display of my Z3+. Way too complicated! Now I understand, why replacing is so expensive.
super
Z3+ = Z4
listen bro
MI MITT NERVOS
pretty sure you did abit too much disassembling just to replace the screen
Meatmanball it says in the title as well .. teardown and screen replacement
yeah, this is more of a teardown than a screen replacement guide because I didn't need to remove all those to replace the screen. It's all unnecessary work.
TITLE SAYS Z3 BUT VIDEO TEXT SAYS Z4 - WHICH ONE IS IT THEY'RE FUCKING DIFFERENT
So, in order to remove the screen, I would have to remove every little parts of the phone? DANG!!!
Very bad video. Phone is not like in the video seen