Took me 2hrs to take my stock out n install the skunk2, kinda a btch but doable, the motor mount is to prevent the engine from rocking back n forth, which means less flex/tension on the header runner welds where it usually cracks to those who don't have the rear mount.
Interesting. When i had my 8th gen Si I was able to have a header deliver to my house in California. But then again, that was back in 2010. Maybe things have changed. But yes it does make it hell of loud. I had to take mine off after a while. Doesn't help that the header is literally right in front of the driver.
@Seikers I don't have that car anymore. It was an 09. Fortunately, in 2019, I bought another 2009 Si with only 49k miles, one owner car, and all stock. I love this generation of civics. So fun to drive and large amount of aftermarket support. I am actually leaving this one stock. Getting too old for the xtra noise. 😄
@@davidtimoteo38 so I wanna mod mine, if you reflash your ecu with the stock map, does it go back to normal? I'm not trying to brick my car. I even bought a spare ecu just in case, gotta go to Honda to have them bind it to my immobilizer.
i got that code cause i had water in my vtec solenoid plugs on the back of the motor closest to the firewall. just use electrical grease on the connections, these cars (k-series) haven been out for sometime and these plugs didn't have any connection protection so it will short the plug when water gets into it, causing the cel/ LIMP MODE LOL good luck to u guys from dtuned559
So I just bought an 8th gen si and I have the same code and same problem the code is for low voltage on the rocker arm oil pressure switch and I’m finding some weird resistance on the ground side of the pressure switch circuit
Restock on stickers but not gloves, isn't that BACKWARDS? I say get the gloves first stickers second. We're men, we're the logical thinkers in the world 😎
@@frankie1869 they won’t destroy it. Just reflash your car to stock, take the FLashpro off the car and take it to a state ref. It’s really dumb tho since you are told that you can’t drive your car anywhere and you have to pay to get your car inspected by a state ref. It is possible to buy the Hondata CARB flashpro but what’s the use at that point… it doesn’t let you do anything fun and your locked out of doing a lot of cool stuff.
Cali has the greatest car culture, but Cali laws are just so dam strict. Like you have to know someone to know someone, to get parts, or “pass smog”
Between cali and Texas car community is hugggge sucks tho how strict Cali is
skunk2 headers are the best for k series imo, i got it on the rsx and it sounds amazing
Highly agree. Skunk2 header + invidia n1 exhaust is my set up and its so awesome
Yes, just picked up my RSX a couple months ago. It came with DC but swapping to Sunk2 mega. Had the B-series version and loved the tone.
Did you need anything other then the headers for the install?
ASP makes the most power
@@sebastianloya96 that costs like 4x more dawg 😂
Found y’all in July and been my favorite channel since , so underrated keep pushing the content
I absolutely love this content, keep up the great work! Already easily one of my fave car related channels on yt
Love to see it, I’m running a full Skunk2 Alpha, and Megapower RR. With Skunk 2 Cams
How loud is that I’m tryna know 😵💫😵💫
I love seikers content
That’s sick. I live near that bridge. You should do a meet up in LA.
And the Tsx in front of the integra though 💯😎
korean warehouse worker gloves got me, nice!!!
Took me 2hrs to take my stock out n install the skunk2, kinda a btch but doable, the motor mount is to prevent the engine from rocking back n forth, which means less flex/tension on the header runner welds where it usually cracks to those who don't have the rear mount.
make sure to get the car tuned with the header 💙👍🏼
This!! Would’ve done it first tbh but yes please get it on there and get an actual tune.
civic content 💪💪hopefully you get it fixed soon, best of luck 👍
Dope video, I loved these on my 8th gen!
This is the greatest car, Guy contact I’ve seen in years lol
The CEL is for no cat. You need a fouler to trick the o2 sensor.
I had the same code and replaced solenoid and it fixed it
Interesting. When i had my 8th gen Si I was able to have a header deliver to my house in California. But then again, that was back in 2010. Maybe things have changed. But yes it does make it hell of loud. I had to take mine off after a while. Doesn't help that the header is literally right in front of the driver.
agreed. It would definitely be more loud if I had a nonoval muffler, however, the Spoon muffler is actually very doable!
@Seikers I don't have that car anymore. It was an 09. Fortunately, in 2019, I bought another 2009 Si with only 49k miles, one owner car, and all stock. I love this generation of civics. So fun to drive and large amount of aftermarket support. I am actually leaving this one stock. Getting too old for the xtra noise. 😄
my fa threw that code too I had exhaust, intake back then but never got a tune. Once I got flashpro, i never went into limp mode like that again.
Megapower header guys 👍
Makes me wonder how many people really own the s2 megapower header instead of the alpha. 😅 I have one in my fg2 with gopower exhaust system
Siiick hope you enjoy it! I have the same headers and I love it:)
Car is clean bro damn. They don't come like that in NY lol
bro def get that hondata installed
Loud af got damn
i wanted skunk2 headers for my rsx-s too fr but cali
fire content motivates me to get another car :) keep it up guys
when taking the headers out, you should flip the headers upside down so it can get out easier and putting the headers back in is samething
Would you still have to lower the subframe?
I am stuck at this part
Yea you can lower it, but i was able to get out with lowering the subframe by flipping the headers upside down
this makes me wanna mod my 8th gen
Where did you get those blinking bulbs for the tail lights? I have some but I like the slower blinking much better
So bolts just come out like nothing in cali huh? I wish it was that way in the Midwest!!!
Ayyyy less go a seikers vid.
What’s the difference between the alpha and megapower header?
Sounds good!!🔥👌🏾
You guys should invest in a portable lift you can put away to the side when not in use. Will make your lives a lot easier.
You guys remind me of Tj and Calvin when they where your age. keep up the great vibe. New generation of street tuners 🤙🏼
Sweet video.
i love the civic content
load the flashpro 'stock' tune and it will be fine, as long as you have stock airbox
Nope. You'll still get flagged if smog detects the ecu has been changed
@@davidtimoteo38 cali problems 😆feel bad for yall
@@davidtimoteo38 so I wanna mod mine, if you reflash your ecu with the stock map, does it go back to normal? I'm not trying to brick my car. I even bought a spare ecu just in case, gotta go to Honda to have them bind it to my immobilizer.
i got that code cause i had water in my vtec solenoid plugs on the back of the motor closest to the firewall. just use electrical grease on the connections, these cars (k-series) haven been out for sometime and these plugs didn't have any connection protection so it will short the plug when water gets into it, causing the cel/ LIMP MODE LOL good luck to u guys from dtuned559
I just installed these and noticed a super loud hissing noise when on throttle and a smell, is that normal?
Is basemap is safe? I had intake and exhaust and uploaded a basemap stock tuned and run smooth but don’t really gain no power
what exhaust manifold gasket does this need?
I hope they no they can undo the flash if you need to do emissions thing
Know*
Am I the only one that likes to watch this man get all dirty and sweaty working on his car? Just look at them biceps!!!!🥺🤤😍
what brand of manifold did you used?
you guys going to put the itr engine in the integra soon?
yep! Probably sometime in 2023!
Do u need to fp this after u put the header??
Which honda is this one? K20z2?
So I just bought an 8th gen si and I have the same code and same problem the code is for low voltage on the rocker arm oil pressure switch and I’m finding some weird resistance on the ground side of the pressure switch circuit
I also have the same header installed by previous owner
its ur vtec solenoid on back of motor
@@DTuned559 you think so? Cause it goes in and out of vtec fine it only freaks when it stays in vtec
@@loganyarbrough168 could be your plugs shaking during pulls, put electrical greese on the plugs to have a 10/10 connection
What catback exhaust does he have ???
turbo next!
I felt a type of way when Jacob said ranch 99 tf
Replace the vtex oil pressure switch that should fix the problem no need to replace the vtec unit
planning to just clean it and purchase a new gasket. hopefully it fixes it!
no catalyc is god or bad for k20 ENGINE model i have k20z3 and i wanna do that
Did Jacob get a hair cut?
Those newer civics are real tight, this job on the integra would take like an hour
Need an I
hot smog, done!
When u guys gunna motor swap the red ek hatch
planning to do it mid 2023 after the Integra ITR swap.
Can you guys do a engine swap tutorial pls 🥹
Where can I get your lip?
I think the CEL is caused by the O2 sensor. S2 is a catless header.
the CEL is actually for VTEC solenoid. will be replacing it soon!
get a celica for the channel
6:25 😂
How long this gonna last in California lol
more teggy content
Restock on stickers but not gloves, isn't that BACKWARDS? I say get the gloves first stickers second. We're men, we're the logical thinkers in the world 😎
If they catch you with that stuff in cali do they take it from you?
they state ref you so you have to put it back to stock for them to inspect it.
@@Seikers Gotcha, so you don't have to worry about them destroying the flashpro for example?
@@frankie1869 they won’t destroy it. Just reflash your car to stock, take the FLashpro off the car and take it to a state ref. It’s really dumb tho since you are told that you can’t drive your car anywhere and you have to pay to get your car inspected by a state ref. It is possible to buy the Hondata CARB flashpro but what’s the use at that point… it doesn’t let you do anything fun and your locked out of doing a lot of cool stuff.
@@Jakupdoesnt that sucks, thanks for explaining
I know it seems pretty normal for u guys as friends but i feel bad when u guys bully eachother xD
?
?
its all for the fun ☠
@Yeehaw not my point but whatever
Y’all’s voices sound the same
How can I get the header in LA ?
Love this vid. Shows you what NOT TO do. Best bet: take it to a pro shop and pay for pro service. Gotta pay to play. Thanks guys.
what are they gonna do thats so different from us doing it ourselves lol
you keep saying headers? are you doing a v8 swap :P
Gaylafornia sucks 😂
Even with a 62a rear lower mount it has vibrations. itll break in and be better though.
What’s the diameter for this skunk2 exhaust?