16-12 Solidworks Tutorial | CSWP segment 3 | Practice Test #1 | BWEngineering
HTML-код
- Опубликовано: 2 июл 2016
- Solidworks Tutorial | CSWP segment 3 | Practice Test #1 | BWEngineering
If you want to try this test, please visit my site(library) to download model files.
◘◘◘ AMAZON Author's Page and Online BW's Bookstore ◘◘◘
www.amazon.com/stores/author/...
sites.google.com/view/bw-engi...
If you have any questions about this model, please contact us, and if you want to work on a related project together, please contact us.
=======================
Further information
=======================
If you want to get this model, please refer to the site below.
sites.google.com/view/bw-engi...
sites.google.com/view/bw-engi... Наука
thanks again for the resource just a few notes for anyone trying to complete:
-Q1 the part is very hard to create, I'd recommend skipping it or at least having the actual part open to compare and check dimensions
-Q6 I got 177.58 not a big deal but if you round to the nearest deg we get 178 which is right in between two answers
-Q8/10 as far as I can tell the sub arm can still move so I couldn't get answers to the problems
Hi!
I agree with your comments.
Tip for solving Q8-10: There was already a mate in the actuator of 12mm. If you keep that one (or not suppress the one you made), you can solve the last 3 questions
with this plans design is ridiculousment imposible do this model in the 1 Stage...
Can you also create a video for section 2 of the exam? (part config + design table etc..)
Okay, I'll do that for you. Thanks
Can you send me the link pllease ?
Can you me the link of files?