that motor is going to last much longer than any of your previous k20 setups, keeping it under 8k rpm is wise, you wont lift the head off the block like that and cause headgasket failure.
Supertech Valvetrain would be a nice addition. I have an 8th gen Civic with the Kraftwerks Kit as well and I am very happy with it! I'm in the Bay Area too.
Been watching from a far, sleeper style (UK) Nice setup & it rips my man. I'm guessing more torque with the extra cubes but what HP ya thinking bro? 🔥✌
You can fit 235 max on those stocks before it looks goofy. Find a set of 17x8 Acura TL fat 5’s they still have that OEM+ sleeper look but have the width for a 245
Go street semi slicks that work well at ambient but focus on stiffening up the rear suspension. Stiffer the better when it comes to fwd launches as it keeps the weight from shifting off the front tyres.
"DISCLAIMER: Filmed in Mexico for movie purposes only. The video was highly edited and not real. Green screen is in use during the making of this video. No laws were broken during the making of this video. "LMAO GOT TO LOVE THAT
A Nice clean and stock looking sedan 8th gen. And it sounds so nice on top of that, doesn't seem to sound raspy like most, actually sounds almost stock which I like I had one with RH on stock exhaust it sounded stock but like louder. Silly question but Does it still rev high like the k20?
@@Jojo-ot7cu honestly not that much maybe basic bolt ons. Just want a better daily, rn i daily a 9th gen (not si and its auto) and i just constantly have that itch to shift.
@@Jojo-ot7cu im not sure yet I don't have much knowledge on the k24 but I want to do a k20 intake manifold, k20 head, cai, headers, and catback, and ofc hondata
I would check out r888rs in 235/45/17 I have em and I really enjoy them. I have PRL kit with gtx3071r gen 2 on my k20z3. Even when lowering my psi to 5.5-6 in 1st itsstill basically dead spin. Only thing that had a crazy effect was hondata traction control. With those tires, BBG setup, and traction control 1/2 dead hook.
I love this build. If you ever get the chance to rebuild your trans you can upgrade 2nd and 3rd gear to stronger gears from synchrotech and do a mfactory lsd. I did that in my tsx before swapping in the Si gears and it's amazing!
Just an fyi you have an lsd if it’s pushing you to the side this can be an alignment issue, go to a really good alignment shop and request to reset your subframe. It should go to where you point it. I have an open diff and since I got my subframe reset i don’t have torque steer anymore.
Hey, I swapped my Kraftwerk's 8th gen si with a k24a2 and I had to put the supercharger onto the higher setting on the mounting bracket because it hits the intake manifold. I was wondering if you know how to fix that issue or ran into that?
What bracket did you use to mount the Rotrex? I installed the 8th Gen Kraftwerks kit on my K24A 8th gen and ran into clearance issues closing the hood and had to modify
"a lot of you question wut i do for a living.. I hustle". I str8 up respect this dude! Keep pushin homez, luv ur build
ong!
Legendary
@musoui 😂
Flip cars and drugs home boy
Bro this build. It's something we all aspire to do. Respect
GOAT IS BACK 😅
🔥🔥🔥definitely one of the best Honda content out on RUclips rn
Once you get coils and other suspension things to make the car stiff and a proper wheel n tire setup the car would be crazy
Yo no Cap, u literally made the cleanest civic si I have ever seen, Keep up Dude!
Yea no cap broo 😂
“a lot of people ask what i’m doing i HUSTLE “ 🤣🤣🤣🤣
This setup is fucken crazy 💯💯💯
this channel highly slept on ong
Facts
This guy the reason why I kept my si ✌️
Even tho i sold my boosted 8th gen still gotta support the homie 🤟🏻💪🏻
You scared those two people walking 😅😂🎉
CONSISTENT POSTS + SLEEPER k24 TYPE OF NIGHT BABYYYYYYYYY GLAD DA BOY IS BACK
Glad you came back dude!
Aight that was a long enough break, please keep uploading 🙌🏽
Build is coming along very nicely...honestly car looks really good can't wait to see the black si
5:10 Hell yeah those pulls on corners in fwd be fun, Nice 👍🏻 🔥
Welcome back bro cant wait for the next video keep up the hustle bro
Been waiting for this for a minute. Glad to see it move out.
OML SHE SOUNDS AMAZING
Glad ur back bro
I can't wait to see some gapplebees in Mexico with this thing
Welcome back brother 🙏
that motor is going to last much longer than any of your previous k20 setups, keeping it under 8k rpm is wise, you wont lift the head off the block like that and cause headgasket failure.
Supertech Valvetrain would be a nice addition. I have an 8th gen Civic with the Kraftwerks Kit as well and I am very happy with it! I'm in the Bay Area too.
Can’t wait for the black civic V8 hunting😈
Super car hunting
Owning my LSJ ion redline supercharged it gives me joy seeing people SC over TC and enjoy instant tq.❤❤❤
It’s Back!
This thing Eats 😮Damn I wanna boost my Si now
Been watching from a far, sleeper style (UK)
Nice setup & it rips my man.
I'm guessing more torque with the extra cubes but what HP ya thinking bro?
🔥✌
3-400 is my guess. 🤔
homie was just walking with his girl in the beginning 😂😂😂
Supercharger in a civic is crazy
"The answer to that is. I hustle " lmaooo, but real
That's a hell of a sleeper build that can really hurt a lot of feelings lol cough cough 392 boys
Insane Set up :D making me want to super charger my Fn2 civic type r
You can fit 235 max on those stocks before it looks goofy. Find a set of 17x8 Acura TL fat 5’s they still have that OEM+ sleeper look but have the width for a 245
Nothing goofy about some meat hanging out
Time to race baby !!!🔥🔥🔥
Happy to see the car 🥹
That car is crazy
Heck yea another vid 👌🏼 looking good bro
We literally live in the same area, even tho you ignore me and won’t runem one or two times. I’ll stay supporting your channel.
235 sounds good and will go best with the clean aesthetic in my opinion. Wicked Si!!
Livin my supercharged dream fr
Congratulations from So-Cal with love ❤️.
That looks like it would be a blast to drive.
Go street semi slicks that work well at ambient but focus on stiffening up the rear suspension.
Stiffer the better when it comes to fwd launches as it keeps the weight from shifting off the front tyres.
Man’s said he hustles Lmaoo fire
Hell yeah perfect timing
Right on time with my dinner
A good set of 235s would hold down pretty well. Recommend Michelin pilot sports. Love em bro. Keep up that hustle! 🤙
I agree
Your hondas are cool asf
I have the 1.8L version of 2010 and it's already nice... I can't imagine what that beast will do. Enjoy it.
trust me get a si. had a base model too and the throttle response felt trash even with a flashpro
@@phantasy2075 Maybe,but im good with the 1.8 anyway... i do not want for racing. Its ok for me
yo this sleeper just went into a coma! 😮
Miss you man🙂💔
love the uploads
"DISCLAIMER: Filmed in Mexico for movie purposes only. The video was highly edited and not real. Green screen is in use during the making of this video. No laws were broken during the making of this video. "LMAO GOT TO LOVE THAT
My guy I didn't realize you local, that's dope!
WE BEEN WAITING. thank you!
My boy rocking a A’s hat 🧢 that’s what’s up
Damn haven't seen u for a min nice to have u back
damn bro your an inspiration fr 🙏🏽 i got a fg2 and your a big inspiration fr bro
Being from Pittsburg, it's cool seeing your videos
man i know what the k24 sounds like boosted 😈 i hear my car fr
Glad to see the civic is back up and running again time to hurt some feelings 💪🏽
Bro you’re a freakin genius 🔥🫡
A Nice clean and stock looking sedan 8th gen. And it sounds so nice on top of that, doesn't seem to sound raspy like most, actually sounds almost stock which I like I had one with RH on stock exhaust it sounded stock but like louder. Silly question but Does it still rev high like the k20?
Just bought myself a 2005 rsx, k24 swapped already. Looking to put a supercharger and injectors on it soon.
when im asked who inspires me i send them a link to this channel💯
this build is the best brother, keep posting!!
duuude this makes me miss my 8th gen fa5. sitting in the garage but i might find an fb6 9th gen and keep the fa5 in the garage
What’s ur plans with the 9th Gen
@@Jojo-ot7cu honestly not that much maybe basic bolt ons. Just want a better daily, rn i daily a 9th gen (not si and its auto) and i just constantly have that itch to shift.
@@playboiidylan what bolt ons will you be getting?
@@Jojo-ot7cu im not sure yet I don't have much knowledge on the k24 but I want to do a k20 intake manifold, k20 head, cai, headers, and catback, and ofc hondata
I would check out r888rs in 235/45/17 I have em and I really enjoy them. I have PRL kit with gtx3071r gen 2 on my k20z3. Even when lowering my psi to 5.5-6 in 1st itsstill basically dead spin. Only thing that had a crazy effect was hondata traction control. With those tires, BBG setup, and traction control 1/2 dead hook.
How much was the full k24 swap and where do you get it from looking into doing something similar?
4:01 looking like Martinez lol I’m there all the time
Keep hustling GG🤙🤙
I hustle😭😭😭 respect it😂🫡
why don’t you do a k24/20 setup on your black car? since u have a full k24 in this one😮💨
K24 powa
Best tuner
Best honda channel bro insane
I love this build. If you ever get the chance to rebuild your trans you can upgrade 2nd and 3rd gear to stronger gears from synchrotech and do a mfactory lsd. I did that in my tsx before swapping in the Si gears and it's amazing!
keep up the grind
Laughs in VB WRX.
I had 13 pounds from the factory with the 2.4 motor.
I’m at 17 now with all wheel drive. 😬 😜
That’s it
I just drive a stock jdm h22a but love watching your setup. #hondalife
i can't wait to see this new build challenge some V8 brother!
Just an fyi you have an lsd if it’s pushing you to the side this can be an alignment issue, go to a really good alignment shop and request to reset your subframe. It should go to where you point it. I have an open diff and since I got my subframe reset i don’t have torque steer anymore.
that man is shifting in SLIDES????
Do you still have the z3? Should swap the head if I’m not wrong the hybrid swaps are popular
depending which k24 i heard its a little more complicated
This thing sounds nasty af! I love it!
Absolutely fantastic set up- let me know if you are ever in TX! Keep up the videos- maybe show us around the vehicles up on the lift
This just has more torque but is not faster than black one for sure on the top end for sure
Finally back
First 3rd gear pull going into 4th was weak AF . Homeboy said omg this thing pulls .
Your friend looks like the boxer Golovkin 😅
Fr
I want another 8th gen so bad! My last one got hit while parked and it got totaled. I didn't even get to enjoy it😭
Can't wait to boost my 9th gen
does rain get in the engine bay with the hood spacers?
No sir
Go With a Merc Racing 2300 and hit 600whp.. Then youll actually be scared hitting 160mph lol.. Meerc racing got the best SuperCharger kits out there..
Facts. Kraftwerks breaks all the time.
The sleeper is awake
Need the acuity short shifter
Im planning a SC K24 in my mini cooper, for an AWD build, should be fun!
Hey, I swapped my Kraftwerk's 8th gen si with a k24a2 and I had to put the supercharger onto the higher setting on the mounting bracket because it hits the intake manifold. I was wondering if you know how to fix that issue or ran into that?
you have to cut the hood, or dent it enough
you can see his dent in the previous video
We had to raise the hood latch also
What bracket did you use to mount the Rotrex? I installed the 8th Gen Kraftwerks kit on my K24A 8th gen and ran into clearance issues closing the hood and had to modify
Lets gooooo!
That's a beautiful car my friend.