I'm proud to say you have become my favorite Moto-Dude because you are building something larger than yourself. A community of brothers, Thank You from Cali.
@@BlockheadMoto Youre awesome! Thanks so much! Link isnt working. Where did you get this and will it work on my 04 HD XL 1200 custom? Liked and subscribed!
I'm now a proud owner of th 2017 harley davidson low rider s!!!!! Gotta go pick it up in texas Thursday. Wouldn't have ever even known about this bike if I didn't watch ur channel. Now I'm gonna have plenty of how to videos for all the upcoming upgrades. Thnx for all ur help and entertainment.✌👊
Some advice from an electrician. First, always take a picture of the wiring harness. Don't rely on memory. Second, use electrical tape to attached a single wire about 2 ft long to the wires of the old gauge. This is so when you pull the wires out you can use the two foot piece of wire to bring a new wires back in. it probably took them quite a while to fish those wires back through that little tiny hole on the bottom. Next lightly Lube the electrical pins and bare wires with silicone dielectric grease. You can get it at most auto supply stores. Last wrap the entire wire harness with nylon High-Temp Split Loom. Auto supply stores will have this also.
F@ck’n arm chair quarterbacks everywhere. If people wanted all that free advice they would ask and even more so ask someone that can use proper grammar.
Hey, I know im 4 years late. But I did have this exact set on my 2008 Street bob for 3 years and they worked amazing. The fuel gauge was accurate and reliable, which was proven with long trips. It was even responsive when the bike leaned far enough. 10/10 I've put this on every bike I've owned since.
@@rmhkvf hey I just saw this. Mine were installed by the dealership before I picked up the bike (2017 FatBoy S). I am now looking for the same kit for my 2007 Softail Custom, and The only one that Harley shows is for Dyna only. But I am starting to think it is the same kit. They just have it listed as Dyna fitment, I am going to ask the guys at the shop tomorrow and see if it fits. Its expensive (from harley) but I haven't found an after market one. I just hate the stock gas cap and fuel gauge on that tank. Hate the console too, wish I could find a custom one that doesn't look so 1984. I don't like chrome on top of the tank, the sun glare annoys the hell out of me, I like to keep my chrome below the tank only. same for handlebars, I like them black.
Ooh, yeah.... Nice mod, and clean install. Looks good! I’m getting my first sporty and watch you for mod ideas for that but I like to throw your Dyna vids some love too. Keep it up, man!
Blockhead, could you please add how many beers you need to have to do this install in the description. I plan on doing mine this weekend and don't want to be too sober!
Hog on the Tyne about 4-5 12 packs , a bottle of gin, a bottle of Jameson , bbq chicken, bratwurst, hot dogs, ribs, chips , a box of Uncrustables and about 10 good friends..
Great video! I was never able to get the wires out of the connector but knowing I wasn't going to be using the stock fuel gauge again I simply cut it off.
I've been wanting these for my Fat Bob, but in chrome. Never thought about looking on here until somebody mentioned on HDF. Yours was the first video I came across. Nice video. Clean install. Looks I'll be ordering these soon and doing it. I figured you had to drain the tank to install them, but, I'm guessing by your three gas lights on the gauge, that would be incorrect. Good to know! Haha. How is the accuracy of the gauge so far? Fairly close for the most part?
Just did the HD speedo/tach 74776-11c and this mod to my 17 Slim S. (Black) Looks FUCKING amazing. Used this video for the gas gauge install. Great help. Thank you. I was going to leave it unplugged and safe it off but decided what the hell. Most bikes don't come with 1 gas gauge much less 2. LOLOL Thanks again.
Hey block head I’ve been watching you for a while, I know this is an old video but I wanted to know if this would fit a 2020 iron 1200 sporty? I just got it to stage one and I’m working on the little stuff.
The kit used in the video is for a Dyna, but I think they make it for a Sporty as well. Checkout HD’s website or call your local parts desk 👍🏼 thanks for watching!
So Mr. BLOCKHEAD can you please help a brother out. Just would like to know where the fuel sensor wire is so I can attach it to the new digital fuel gauge please please thank you ahead of time
I ride a sporty. Thank God I don't have that pesky fuel gauge to worry about lol. Keeping it simple. I know I'm out of gas when it won't run anymore lol.
I'm proud to say you have become my favorite Moto-Dude because you are building something larger than yourself. A community of brothers, Thank You from Cali.
Agreed
Appreciate that George, means a lot! Has been a cool side effect of the channel that I didn't foresee, but I'm very grateful for it!
My thoughts as well when I saw this video great feeling to see this bond that has come
@@BlockheadMoto Youre awesome! Thanks so much! Link isnt working. Where did you get this and will it work on my 04 HD XL 1200 custom? Liked and subscribed!
I'm now a proud owner of th 2017 harley davidson low rider s!!!!! Gotta go pick it up in texas Thursday. Wouldn't have ever even known about this bike if I didn't watch ur channel. Now I'm gonna have plenty of how to videos for all the upcoming upgrades. Thnx for all ur help and entertainment.✌👊
Some advice from an electrician. First, always take a picture of the wiring harness. Don't rely on memory. Second, use electrical tape to attached a single wire about 2 ft long to the wires of the old gauge. This is so when you pull the wires out you can use the two foot piece of wire to bring a new wires back in. it probably took them quite a while to fish those wires back through that little tiny hole on the bottom. Next lightly Lube the electrical pins and bare wires with silicone dielectric grease. You can get it at most auto supply stores. Last wrap the entire wire harness with nylon High-Temp Split Loom. Auto supply stores will have this also.
F@ck’n arm chair quarterbacks everywhere. If people wanted all that free advice they would ask and even more so ask someone that can use proper grammar.
great instructions. followed it and it was 10000% better than the instructions. thank you!
Block & Friends Install! Yaaaay!
Interesting change-up for an install video. Looks like a nice evening. :)
Thanks for adding more light to the how-to vids. Much appreciated.
You'll have to let us know how accurate the fuel gauge is. I've heard mixed reviews. Looks slick, tho!
Hey, I know im 4 years late. But I did have this exact set on my 2008 Street bob for 3 years and they worked amazing. The fuel gauge was accurate and reliable, which was proven with long trips. It was even responsive when the bike leaned far enough. 10/10 I've put this on every bike I've owned since.
Just installed mine yesterday. Super easy and a MUCH cleaner look!
Got a link to buy? Can't find them
I ordered mine right off the Harley Davidson website.
me and my girl love that you always use this sound we always vibe when we watch the video! lol
I live in Orlando, love the install. You guys are wanting me to get back into riding. Just sold my Victory a few years ago.
Dude!! Awesome vid! Thank you!
I have these on my Fab Boy S, and let me tell you, it improved the look of the bike 200%. Also, only really works if you have a black bike.
I'm trying to find a set for my fatboy S. Did you get from HD or afer market?
@@rmhkvf hey I just saw this. Mine were installed by the dealership before I picked up the bike (2017 FatBoy S). I am now looking for the same kit for my 2007 Softail Custom, and The only one that Harley shows is for Dyna only. But I am starting to think it is the same kit. They just have it listed as Dyna fitment, I am going to ask the guys at the shop tomorrow and see if it fits. Its expensive (from harley) but I haven't found an after market one. I just hate the stock gas cap and fuel gauge on that tank. Hate the console too, wish I could find a custom one that doesn't look so 1984. I don't like chrome on top of the tank, the sun glare annoys the hell out of me, I like to keep my chrome below the tank only. same for handlebars, I like them black.
This was very relaxing to watch....
+Chorn Barino Erick has a very relaxing presence, haha
I just noticed this was blockhead holy crop you have grown and improve the quality and making of your videos
How do you only have 21k subs??? Ur content is on point 👌👌👌
+Eric Rodriguez Organic growth, word of mouth, channels only been going a year :) Appreciate the support sir!
Just installed mine last night off of your video. Thx much!
Ooh, yeah.... Nice mod, and clean install. Looks good! I’m getting my first sporty and watch you for mod ideas for that but I like to throw your Dyna vids some love too. Keep it up, man!
Love the vids man. I watch every one and like them even if it's not a bike I like. 😂
Weredo u buy from please
Blockhead, could you please add how many beers you need to have to do this install in the description. I plan on doing mine this weekend and don't want to be too sober!
Hog on the Tyne about 4-5 12 packs , a bottle of gin, a bottle of Jameson , bbq chicken, bratwurst, hot dogs, ribs, chips , a box of Uncrustables and about 10 good friends..
nobama just a quiet night then!
Hog on the Tyne lol ,yeah...
Thanks for this video blockhead! I love my FXDLS even more now.
Great video! I was never able to get the wires out of the connector but knowing I wasn't going to be using the stock fuel gauge again I simply cut it off.
I’m about to install this same kit on my ‘17 Low Rider S. Do you really need to disconnect the battery first?
very discriptive, thanks boys
Can you find out if you can use the flush mounts with the new 2018 models? Bike looking better and better
"Hot wheels" and "Jesus Christ" 😂😂 Ericks awesome! That simple mod looks great blockhead!
Manny Garcia thank you! Excuse my messy garage.
They look sick!
kool install of the gasoline meter !
awesome video !!
I'll be ordering these.
How has that adhesive trim ring lasted around the gas cap?? Has it peeled up or off at all? Awesome install video, thanks.
I was about to order set of those and I found your video. Awesome video and great channel. Thanks for sharing. How are they holding up so far?
Looks awesome gonna be doing this for sure thx for the video.
Ok ... starting to make a believer out of me ...
That looks cool ....
"bro cause like, you dont't want anything on the head" Best install commentary ever, LMFAO!
I've been wanting these for my Fat Bob, but in chrome. Never thought about looking on here until somebody mentioned on HDF. Yours was the first video I came across. Nice video. Clean install. Looks I'll be ordering these soon and doing it. I figured you had to drain the tank to install them, but, I'm guessing by your three gas lights on the gauge, that would be incorrect. Good to know! Haha. How is the accuracy of the gauge so far? Fairly close for the most part?
nice! but i am wondering when are you going to install a oil cooler? and what brand?
Good think y'all did that at the beginning of your night lol 🍻🎉
Nice install. Would they work on 2018 fatty......? Would the fuel gauge in the main console be deactivated ? They must look awesome at night.! 👍
love all your videos, man! I know this video is old but what tank is that? size? thanks for all that you do!
Just did the HD speedo/tach 74776-11c and this mod to my 17 Slim S. (Black) Looks FUCKING amazing. Used this video for the gas gauge install. Great help. Thank you. I was going to leave it unplugged and safe it off but decided what the hell. Most bikes don't come with 1 gas gauge much less 2. LOLOL Thanks again.
Did very well fellows
Good job 👏
Great tips, thanks for sharing
Do come in polished or chrome finish?
Would that gauge clusters fit on a 2014 softail slim? I think it would look sick on my bike
I put a set on mine 3 weeks ago
what would be the reason I have a leak coming out of the hole where the wire comes out on my 04 Nightrain?
Looks way better.
Nice unit
Hi ..do you have the part # , i need to replace my Softail deluxe and RK 2003 fuel gauge .. Thanks and HAppy New Year !
Would that fuel guage work for a 90s sportster
So I have to ask does the gas cap leak at all??
+Ked Hall Not at all! :)
Hey block head I’ve been watching you for a while, I know this is an old video but I wanted to know if this would fit a 2020 iron 1200 sporty? I just got it to stage one and I’m working on the little stuff.
The kit used in the video is for a Dyna, but I think they make it for a Sporty as well. Checkout HD’s website or call your local parts desk 👍🏼 thanks for watching!
Hey man, Can you let me know where I can get one of these gas caps for my 48 Sportster 2020? Thanks
I wish I was local to Blockhead. I want to be a guest star on his squad. Blockhead empire!
arkindomino makin us blush over here... lol
looking good man
Wow ,, Nice ,, i got goose bumps ..i want for my Hog
uhhhhh, Blockhead. You are at 20k Subs! **!clapping!**
Road 'N Turf lmaoo this aged well
ATOMIC KRUSHER crazy how long ago that was LOL
If Matt can do this now you know you can!
Coolest gas gauge!
What is the handle bar phone mount that you’re using in the other videos?
I want a fuel gauge for my Street Rod 750.
Were i can order this? Amazon link?
And who makes that product? the unboxing portion appears to be JP Cycles
Could I put this on a Sportster XL1200N?
Having an extremely hard time putting the wires into the housing. Not sure if it’s cuz mine is defective or what
Where can we get Blockhead decals?
It looks like you have gas in the tank...you don't need to empty the gas tank for this?
well done boys! thanks
Did you empty out the gas before doing the install on the gauge part? @BLOCKHEAD
Nah it doesn't go into the gas part of the tank, no need to empty gas
any rattle when riding?
Is there any fuel gauge you recommend to run on a 15 forty eight? Anything off amazon/eBay that might work ? Thanks
Does it fit on the 883 Iron?
super smashing great
I wish they made one of these for the Sportsters. I know they have the one for the brake reservoir but I think the gas cap looks better.
So Mr. BLOCKHEAD can you please help a brother out. Just would like to know where the fuel sensor wire is so I can attach it to the new digital fuel gauge please please thank you ahead of time
Will this work on the 2020 low rider s?
link ain't woykin'. help? :D
Whats the name of the product? The link doesnt work?
the link no longer works, can you post a new one?
Dammit man, i was watching Game Of Thrones!!! Lol good time!!!
Where can I order it?
That looks pretty easy honestly.
Cheers blockhead appreciate it from OZ
It's can put in FXDL 2002 or not??
do you guys know if the fuel gauge will work on an 03 softail fatboy carb model year? My local HD delaer said might not.
Not sure to be honest. Not sure who to refer you to if even your HD dealer doesn't know. Maybe try calling another dealer?
So after this install my stock low fuel light stays on, anyone have a fix for that?
theres something like that to the Iron 883 model...??
Manuel Santos just the fuel cap sir.
Possible on iron ?
Amazing what a guy can get accomplished for the price of a 30-pack.
T
I’m sure it’s been asked.....which bike is that?
dyna low rider
might have to change channel to Blockhead and friends love the group videos
I ride a sporty. Thank God I don't have that pesky fuel gauge to worry about lol. Keeping it simple. I know I'm out of gas when it won't run anymore lol.
when the wife going to work on rebel?
Cant find that kit, the link is unreachable
My ocd is going crazy how the black was crossed behind the yellow
hello - speedometer display "E" what it means - thanks
Gas cap is far from flush
That is cool....
Hey Blockhead.. Can we install the similar on RoyalEnfield Bullet Fuel tank.
Block head is a ginger?? Sorry I love you man but accident face reveal 😂 no worries man I won't post where it is if they care they gotta find it