RadioLink AT9 Stick Calibration
HTML-код
- Опубликовано: 6 фев 2025
- Radiolink allowed me to release the BETA versions of the firmware for both AT9 and AT10. Please be aware that if you choose to test the BETA versions, you are doing it at you own risk. I've been testing the firmwares and they are OK. No problems what so ever.
AT9 default firmware
www.dropbox.co...
Latest AT9 firmware V1.2.6
www.dropbox.co...
AT10 default firmware
www.dropbox.co...
AT10 latest BETA firmware
www.dropbox.co...
Awesome! My AT9 s was needing this! Never calibrated it since I got it. I use it all the time. Thanks for this video tip. I have been super happy with my Radiolink products! I run the R6dsm in almost all my rigs. and the 12 in my longer range quad. Such a blast. My little goal: To have 15 diff quads all on one radio. yee haw.
Mejor calidad de video y mejor explicado que el video de la marca.
Gracias!
Thank you for this. Now when I get home I'm going to do this to my at9.
Nice video and thank you sharing
Many thanks Sergio
Hi Sergio, this video was really useful. I just wish there were more english videos on how to use the menus. If you could make more of these you'll be helping a lot of people out there.
The THR-stick is pretty tight, you could loosen it up. By opening the AT9S up and loosen the 2x screws with the alumium plate a bit, the left THR stick feels much more comfortable if you do.
Very good video
looks pretty intense
You are great man thanx
Tengo una duda sobre la emisora Radio Link AT9. En el manual indica que para alerones independientes hay que conectar uno al CH1 y otro al CH7; al configura el CH1 no tengo problema y puedo escoger el porcentaje de subida y bajada moviendo el joestick de aladeo, pero en el CH7 al moverlo no puedo cambiarlo. ¿Podría ayudarme?
Saludos
hey there I got the same radio an I love it ...your videos help me understand somethings with it . I'm having some troubles with a setup I'm trying to do so I figured I'd reach out to see if u could shed some insight on it..so I currently use sbus with my at9 radiolink..I have a servo I'm trying to set up so it tilts my arms forwards an backwards. I found how to mix the channels so the servo moves its plugged into channel 6 an switch A turns it on and off... but I can't figure out how to trim it or set it up so when I turn the switch on and off it stays in the middle position. right now when the switch is on its perfect an my right stick tilts the arms back an forth but once I turn it off the servo goes backwards. if you have any info on it...it would be much appreciated thanks!!
Fantastic!!! thanks so much
Hi I followed you video on setting up the atm with a naza lite but I'm having problems with the throttle.
When the throttle stick is in the centre the throttle is at zero. so I'm unable to arm my naza..
can you tell me how I can sort this?
I'm new to all this and could really use the help.
Kind Regards.
Thanks for sharing!
I have an AT9 and have found most of the programing ok. I have set up aux channels and the switches (3 and 2 way) show that they are working in the radio. When I go to Cleanflight, fliping the switches will not show on Cleanflight. This means I can not set up any aux channels. Have I missed something?
how do you set the throttle to not kill the motors when all the way down? is it in calibration or do I have to go in that computer program? Just got my Arris 250 and AT9 just now....
sorry copy numbers on the left to get the center value on da left stick(right no.)
Hi
Can you please help
I am trying to set my trottle stick end points
my throttle stick only responds mid point,even after i have followed your calibration
can someone tell my how come left it’s 101 and right it’s 3848 can’t understand the numbers of this pls help i just got my and my craft keep going right or sometime left it’s not going straight up thank you
First let me thank you for all your help you videos have saved me many times as I am a noob at rc . I have an AT9 same as yours but I am in mode 1 as I am a lefty. my question is when calibrating is it the same .
Hello
I have a Radiolink AT10 and I would like to program differential thrust
can someone help me out Please
Hi, my name is Dalisson from Brazil.
I have a Radiolink at 9 and I have a problem with CH2UP, it is oscillating. Do you know how to solve the problem ??
I use this video as reference when I calibrate my at9 and I noticed my throttle channel 3 goes to 116 resting at the lowest point and full throttle it's at 116. Is that ok? Or is something off? Please let me know. Thank you sir!
Olá Sergio Pereira,estou interessado em comprar a Radiolink AT9,e estive olhando em uma página chamada gearbest.com,lá diz que essa rádio tem um alcance de 600 metro...a questão é, se é possível melhorar esse alcance em um futuro?
Desde já meu muito obrigado.
Hello, Can I use my AT9 with a flight simulator? I can't find any information about this. If so , do you have a video link showing the setup? I really like the radio but cant find much on setup and features
+dbm 55 Hi. Yes you can use it with a flight simulator. You need a USB Dongle www.banggood.com/FPV-Racer-Simulator-with-Dongle-Cable-for-Flysky-Esky-Radiolink-Futaba-Remote-Controller-p-1047126.html
Cheers
+Sergio Pereira I'm having trouble setting it up with a flight simulator too. The controls are not working the right things.
Can you please upload a video on Radiolink AT9+R9D setup with the Naza m lite flight controller.
Thanks....!!
when doing this is it possible to move other sticks? for instance what I'm trying to do is make my left stick throttle and aileron and right stick pitch and rudder.
I may of answered my own question. there's a stick option in the settings mode 4 is what I want I think
Your transmitter is mode2, right? Make sure the STK-MODE of your transmitter is 2.(You can check it in the PARAMETER menu.)
Mr.Pereira could U make tutorial for calibrating AT10 to RF7 simulator ...please....
I have the same AT9 but I hace 10 channels at the Servo screen. Why?
Did you recieved any AT9 for free by the way? You're an "oficial tech doc": radiolink.com.cn/doce/at9tutorials.html :D :D
what do you think about this radio? i found no one using it
In my opinion it's a good radio. I like it. No problems what so ever.
I think it a good radio as well. I just wish there were more videos like this one Sergio has made.
Me gustaria mucho un video en español muchas gracias
adjustable stick tension? how's the feel of the gimbals? thank you
No adjustment. Spring tension is very low.
After doing this my throttle only ever gets to 95
How the hell did know to get to the menu wtf
Muito bom o video parabens,gostaria muito que voce fizesse um video encinando a configurar a Radiolink em portugues ou em espalhol para enternder melhor.
+paulo henrique bueno tavares vou fazer videos em português e espanhol. Estou a editar os videos. Nos próximos dias vou postar.
Obrigado
+Sergio Pereira Também estou ansioso a espera dos videos em Português. Muito Obrigado
how good is this radio?
y not copy the stick