I'm glad to hear that! 😊 This video is the first part of a series actually. You can find the playlist here: ruclips.net/p/PLuVz-FGt23yJvelTMOb62LMfVGVUgYyRK
The video moves way too fast even at .25 speed. It’s very time consuming to need to keep pausing and replaying. I would prefer a slower version for beginners.
It is probably because of the FOV (field of view). Human eyes FOV is around 190 degrees, while the camera in games usually just around 60-90 degrees. This could make everything seems smaller and tight. You can try increasing the FOV, but since Unity doesn't use curved screen like our retina, everything will look very distorted. Usually in games they use Panini projection for the camera in high FOV, it still has some kind of distortion, but it is so much better than the usual projection.
Do you upload this on github or some where? I just follow you videos to do everything in 12hours and my laptop suddenlly shut down itself and when i recover, it only save the extruding part!! Could you help me? I need this unity packages very mush
when Im try to bridge the window edges I keep getting this error do you know hot to fix it? Failed Bridge Edges. Bridge Edges requires that only 2 edges be selected, and they must both only have one connecting face (non-manifold). Great video by the way Im learning a lot thanks to you!!
@@guilhermezanella3534 this is super delayed but its because you were selecting the vertical lines by accident or another random line. I learnt this the hard way too ahaha. You have to make sure you are selceting only two of the horizontal lines (the ones alligned with the plan because you're bridging lines that are parallel if you selct another by accident by say drag selecting it won't work
@@hilmiyafia I already solved it. I needed to configure the Probuild shift mode to substract, so when shift + dragging it would remove the selection on a face
when i first start doing in probuilder dont know this even easier for all the corner and always struggle on the corner cutting and door cutting out and hard to add all the side corner
@@yassinrh2462 I just checked and it worked for me. Can you record a video to show the steps you do from creating a new project to installing the probuilder? It might help me to see what's wrong.
Usually that's because the edges you're selecting are not a closed loop. Check every vertices on the loop by moving them a little bit and see: does the two edges connected to it also move? If one of the edges doesn't move, that means your loop is broken there.
This was the epiphany I needed for interior design, thank you very much. Building the structure as if following a floorplan is fucking brilliant
You're welcome! I'm glad you found it useful! 😊😊
Thank you for this!!! Thank you for making it easy to follow, for a beginner like me!
You're welcome 😊😊
Building the layout from ground up why did I not think of that this is clever work.
Yeah, that's one way to do it 😊
mannn!!!! this video saved my final year in college.. thank you.. can we have the video where you show us putting all the texture and all.
I'm glad to hear that! 😊 This video is the first part of a series actually. You can find the playlist here:
ruclips.net/p/PLuVz-FGt23yJvelTMOb62LMfVGVUgYyRK
Great method. Lots of excess geometry though if dimensions of doors and windows vary.
That's correct, that's why in my other tutorial that is more complex, I merged a lot of vertices. ruclips.net/video/AfaOejwSsCQ/видео.html
The video moves way too fast even at .25 speed. It’s very time consuming to need to keep pausing and replaying. I would prefer a slower version for beginners.
I have a real time version here: ruclips.net/p/PLuVz-FGt23yLxDo1bjaFoslJoS3Ds5Iw_
ikr
I've tried following this tutorial with my real life house and the house winds up being too small for some reason.
It is probably because of the FOV (field of view). Human eyes FOV is around 190 degrees, while the camera in games usually just around 60-90 degrees. This could make everything seems smaller and tight.
You can try increasing the FOV, but since Unity doesn't use curved screen like our retina, everything will look very distorted. Usually in games they use Panini projection for the camera in high FOV, it still has some kind of distortion, but it is so much better than the usual projection.
I suggest using Pro Grids when extruding too!! It helps a lot with keeping straight lines
Great idea!
Pro grids isn't there for me anymore. Can't get fill hole to work either 😅
Thanks bro that's helpful
You're welcome! 😊😊
Do you upload this on github or some where? I just follow you videos to do everything in 12hours and my laptop suddenlly shut down itself and when i recover, it only save the extruding part!! Could you help me? I need this unity packages very mush
I'm sorry, I don't upload this unity package
@@hilmiyafia it's okay, i redo everything already
@@hilmiyafia thanks for you tutorials
@@euniceooi5661 You're welcome 😊😊
Ty for making this
You're welcome! 😊
when Im try to bridge the window edges I keep getting this error do you know hot to fix it? Failed Bridge Edges. Bridge Edges requires that only 2 edges be selected, and they must both only have one connecting face (non-manifold). Great video by the way Im learning a lot thanks to you!!
You're welcome! I think you selected the wrong edges. Try to deselect all edge first, and retry.
@@hilmiyafia yeah I tried this already, im just extruding the faces to connect them
@@guilhermezanella3534 this is super delayed but its because you were selecting the vertical lines by accident or another random line. I learnt this the hard way too ahaha. You have to make sure you are selceting only two of the horizontal lines (the ones alligned with the plan because you're bridging lines that are parallel if you selct another by accident by say drag selecting it won't work
Thanks this is a great way to learn how to work with languages
You're welcome! 😊
why won't it allow me to close up the walls after placing windows and door spaces at 6:45 ??
Hello, it would be helpful if I could see what you were doing. Could you record your screen?
i solved this problem but i'm getting errors with the code can you upload it somewhere @@hilmiyafia
can i also get your email i have a couple of questions with unity it'd really appreciate your help with
@@sarahbahgat8052 My email is: hilmiyafia@gmail.com
hi thank you for this video i have a question how to create cuts at each extruds please
Select one of the edges on the extruded part, and click insert edge loop.
When extruding faces, how do you select/deselect specific walls?
I'm not sure what you mean, does clicking the faces not working? Here you can see it at 5:53
@@hilmiyafia I already solved it. I needed to configure the Probuild shift mode to substract, so when shift + dragging it would remove the selection on a face
@@septavius2073 That's great! 😊😊
@@hilmiyafia Thanks for replying and for your video :)
@@septavius2073 You're welcome 😊😊
AAAAAAH KEEP IT UP!!!!!! Thanks for sharing
You're welcome, and thanks a lot! 😀
Hi How did import the plan? Did you save as an image? Thanks!
You can check this playlist for a more detailed process:
ruclips.net/p/PLuVz-FGt23yLxDo1bjaFoslJoS3Ds5Iw_
@@hilmiyafia Thank you!
@@MatthewNoonan-jw2np You're welcome 😊😊
this is easier than to play the giddy goat with objs and what not
😅😅
How did u do the collider for the building?
I didn't, Pro Builder automatically build it.
when i click fill hole for the floors nothing happens it says no negative number required
:((
Can you record the screen while doing that? I might be able to help you. If you could please also show the model before.
@@hilmiyafia hi is there by any chance i could contact you to help with my work?
@@natesrry You can email me, my email is on my about page.
@@hilmiyafia ahh are u indoesnain btw cause same!
@@hilmiyafia btw just emailed you aswell
best tutorial i ever see 👍
Thank you so much! 😊
For some reason, I am unable to use the extrude thing. I cannot select it from Tools
Can you record your screen while doing it? It could help me to see what the problem is. 😊😊
i have same issue here. Can someone help?
when i first start doing in probuilder dont know this even easier for all the corner and always struggle on the corner cutting and door cutting out and hard to add all the side corner
Hello, I'm not sure if I understand correctly. Do you need any help? 😊😊
the "Tools" MENU is missing.. how can i add it ?
You need to install probuilder first from the package manager. If you see at 0:51, the tools menu isn't there yet too.
@@hilmiyafia yeah i do.. but still didn't appear !
@@yassinrh2462 What is your unity version and probuilder version?
@@hilmiyafia Unity 2021.3.22f1 personal and Probuilder 5.0.6
@@yassinrh2462 I just checked and it worked for me. Can you record a video to show the steps you do from creating a new project to installing the probuilder? It might help me to see what's wrong.
the fill hole for ceiling, roof, and porch doesnt works on me idk why, so i just use 3d cube for ceiling🤣🤣
Usually that's because the edges you're selecting are not a closed loop. Check every vertices on the loop by moving them a little bit and see: does the two edges connected to it also move? If one of the edges doesn't move, that means your loop is broken there.
Thank you
You're welcome! ☺☺
"All compiler errors have to be fixed before you can enter playmodel" how do i fix this? I am stuck at 16:15
Could you copy the code that you had written here? I might be able to help you find the error 😊
I would check the errors I had the same issue. Turns out I didnt didn't capitalize moveSpeed when calling it in the function
Спасибо
good job buddy :)
Thank you 😊
disliked for no voice
That's okay, I understand 👍