This was a lot of fun to make despite the downsides I talked about in the video. If you'd like to see more of this kind of content hit the like button and leave me a comment!
Cant believe I;m the only commenter to this comment. I guess there are not that many people out there who have similar likes. lol. Great job loved it. What was not clear when u mentioned resizing. Did u mean just the thickness? or did u make the pieces actually bigger? I ask because one of the things I have discovered in my search for a good locking puzzle box is the sizes. its either something like 4-5 inch then panel cube or 10-12 inches as u get into unique solid wood ones. with price jumps from less than 100 for small ones and multiple hundreds for anything bigger.
Man that is by far the coolest thing I’ve seen since I started researching laser engraving. I don’t have a machine yet but hope to buy one soon. Any way possible to get plans to make something like that!!??? I’m so impressed haha
Puzzle box is awesome. I could imagine how much time original designer spent on it… I have my own life-hack how to prevent theft of my projects, I am opening them as open source. However I know stories when people sells not own free models and layouts.
I am new at laser cutting plywood but my best cuts have been with the plywood raised with 4 random dies I pulled from my tap set. I focused the laser in the center of the board and yea it worked great
Hi, I built a vacuum bed using two powerful brushless server fands - it sucks down the material flat to the bed, no mess, helps with breakthrough smoke etc. they work great on ply upto 6mm. Would love to see the original box link if you could as I really would like to purchase one
This is the first of your videos I've come across, I wish the algorithm had brought me to you sooner! I look forward to checking out more of your videos very soon - subscribed!
@@LetsMakeAThing Well I can tell you this much. there is virtually no one who shows DIY techniques for building these things, designing them, etc. At least that I can find ... If you were to seriously go in that direction I would think there is a big hunger for it out there and it would bring many viewers.
This turned out lovely. And I have to give you major props and thanks for not sharing it. Sometimes it is quite difficult to locate "original" works so it always comes off as a risk to me unless I know the designer.
@@LetsMakeAThingBonjour, Je comprend bien, mais pourriez vous m'indiquer ou je peux l'acheter si celui-ci est en vente. Là était ma question. Belle journée
@@LetsMakeAThing it’s horrible you have to,worry about things like that one would think it would help both parties. regardless it’s understandable thanks for the video :)
Nice video. Can't wait until you can upgrade to CO2. Hardest part was talking the wife into it, followed by the duct work, electrical, and ethernet hookups.
Hii there.. Coolest box I have ever seen. I want make this in real. It would be great help if you share the drawing files and instructions to install. Thanks in advance.
Can you tell us the original model kit then? I mean since sharing the model kit's plans would not be cool, maybe we can reinstate some of the money flow to the original creators
This was a lot of fun to make despite the downsides I talked about in the video. If you'd like to see more of this kind of content hit the like button and leave me a comment!
Cant believe I;m the only commenter to this comment. I guess there are not that many people out there who have similar likes. lol. Great job loved it. What was not clear when u mentioned resizing. Did u mean just the thickness? or did u make the pieces actually bigger?
I ask because one of the things I have discovered in my search for a good locking puzzle box is the sizes. its either something like 4-5 inch then panel cube or 10-12 inches as u get into unique solid wood ones. with price jumps from less than 100 for small ones and multiple hundreds for anything bigger.
Man that is by far the coolest thing I’ve seen since I started researching laser engraving. I don’t have a machine yet but hope to buy one soon. Any way possible to get plans to make something like that!!??? I’m so impressed haha
Literally every single project I’ve ever done was an experiment. It’s the only way to do things!
So true!
Super cool box and good for you not sharing the thief’s information!
Thank you!
Can you give the link for the original creator of the box? Would be cool to make one
I like that box.. Looks like there are so many ways to use it..
It is a shame that people scam others with plans etc...
Thank you for sharing!
You are a funny guy. I appreciate your subtle humor. I also appreciate that you are sharing your experience. Thanks.
Thank you for the comment! It's good to know that other people get my humor!
This was super cool, and good on you for calling out the IP thieves.
Thank you! Glad you enjoyed the video!
Puzzle box is awesome. I could imagine how much time original designer spent on it… I have my own life-hack how to prevent theft of my projects, I am opening them as open source. However I know stories when people sells not own free models and layouts.
I am new at laser cutting plywood but my best cuts have been with the plywood raised with 4 random dies I pulled from my tap set. I focused the laser in the center of the board and yea it worked great
Awesome video man, great job.
Thank you!
Hi, I built a vacuum bed using two powerful brushless server fands - it sucks down the material flat to the bed, no mess, helps with breakthrough smoke etc. they work great on ply upto 6mm. Would love to see the original box link if you could as I really would like to purchase one
This is the first of your videos I've come across, I wish the algorithm had brought me to you sooner!
I look forward to checking out more of your videos very soon - subscribed!
Welcome to the channel! I too wish the algorithm would bring people to me sooner. 🤣
@@LetsMakeAThing Well I can tell you this much. there is virtually no one who shows DIY techniques for building these things, designing them, etc. At least that I can find ... If you were to seriously go in that direction I would think there is a big hunger for it out there and it would bring many viewers.
Cool box, shame about the file being stolen, good that you are highlighting these issues though. Keep up the great videos
Thank you!
This turned out lovely. And I have to give you major props and thanks for not sharing it. Sometimes it is quite difficult to locate "original" works so it always comes off as a risk to me unless I know the designer.
Thank you so much!
nice Video, thank you. Can you tell me, where i can buy this plan too?
Please respect his decision to NOT share the link. I literally found the box "as stated" as a kit in less than a minute with just a little searching.
Thank you. Appreciate that.
Really cool box, Sorry that some people half to a thief to try and make a small living
Agreed!
That is the type of project I would love to make. Sad, that it was stolen.
Yes it is. I really wish the company that made the original would sell the cutting files!
Bonjour, super vidéo. Merci à vous. Pourriez vous me dire ou je peux trouver le fichier. Merci de votre réponse
So sorry, as I stated in the video I can't share the file due to copyright and intellectual property issues.
@@LetsMakeAThingBonjour, Je comprend bien, mais pourriez vous m'indiquer ou je peux l'acheter si celui-ci est en vente. Là était ma question. Belle journée
What's the name of the box? Thanks for making the video and sharing your knowledge
Unfortunately, as I explained in the video, due to copyright and intellectual property issues I can't share info about the box.
@@LetsMakeAThing it’s horrible you have to,worry about things like that one would think it would help both parties. regardless it’s understandable thanks for the video :)
Nice video. Can't wait until you can upgrade to CO2. Hardest part was talking the wife into it, followed by the duct work, electrical, and ethernet hookups.
Thank you! Sadly, it's going to be quite a while before I get a CO2 for home. I've got everything in place for a CO2, except for the money. 🤣
Hii there.. Coolest box I have ever seen. I want make this in real. It would be great help if you share the drawing files and instructions to install. Thanks in advance.
Sorry, as I stated in the video I can't share the files due to copyright and intellectual property law.
can you share where the original creator (with the full kit) has it so we can reward him?
complicated
Can you tell us the original model kit then? I mean since sharing the model kit's plans would not be cool, maybe we can reinstate some of the money flow to the original creators
Sorry, I made this video a year and a half ago and I don't remember what the original model that was stolen was.