"I just need a good parts truck. That's all it is for" (paraphrased from original truck video) ............ then turns it into a wicked blown K series swapped drift truck. 😄😄😄 Brother, I love your style! 🤣😎👊👊
Man I love to see how much you’ve grown! I left for 5 months and I come back and you have so many dope builds now! I’m so proud that I’ve been able to see the growth! I know I’ve learned so much from you and it’s made me a better mechanic! I can’t thank you enough for sharing your builds and knowledge with us all! Hope you have a great day!
Thanks 🙏🏻 i have been working hard and a lot of my builds are going unnoticed and a lot of my subscribers left the channel. You for example left for 5 months!! I appreciate you coming back for more don’t get me wrong! Just wish more people seen it the way you do right now. I appreciate you!
@@TexasHondaChannel I went to boot camp and got hurt so that’s why I was gone I’ve been a loyal subscriber since the og civic days and it’s so dope to see
I’m so ready to be back but with my family this time! We are gonna achieve so much together bro I can’t wait to see the future of Moore Motorsport and Texas Honda channel with both of us 🤙🏽 we are gonna hook this integra up also 🔥
Believe it or not, you may gain a little more spool when you hook up the turbo coolant lines! I drove my 58/55 turbo, only oil fed, and it spun slower by hand than when I added my coolant lines! I don't know how, because it didn't make sense to me, lol. My guess would be machining tolerances, and specific temperature windows.... And I love your comment about the ships at port! So sick of this garbage....
Yea have to keep it subtle or ill get "demonetized for false content" and your right he coolant lines might increase spool due to heat transfer and less expansion of the journal bearing it does indeed make sense if you think about it in REAL science ways. Hope you see what i did there with the "real science" way. Question everything.
@@TheKleeFamily98 no and yes but mostly ppl are too impatient they close or open car really fast u should wait max 2minute when u open ur engine and close as well after 2minute
Gotta find the correct coolant lines I want to make it right. These turbos can run without them no problem up to 500whp seen it done but the sooner the better for longevity
I was never good with the ebrake then power over drifting. I use to only use ebrake back in my FWD only days and was really good at power sliding and keeping it going but even with my 240sx and Miata and stuff it was better for me just using engine horse power to drift with. In this I was just messing around lol
Been working on finding parts for a B20Z2 GT3582R RD1 build and this definitely convinced me to run water and oil cooled and run a blanket. Were you walking it sideways in 3rd or 4th in the intro? Love, love, love this damn build, man. It just keeps getting better! And, AJ. 'Come to Texas!'
I am not good at making mounts I had my friend do them and they still weren’t 100% where I needed them but they work. Best option is to set the engine where you want it and use cardboard to get a template then take the template to a machine shop of some sort and get them to make some solid steel mounts. If I could get Hasport to make some legit mounts that would be sick!
Doesnt really matter, o2 sensors are built to withstand heat, some of them the ones without a heating element benefits being close to the turbo like that
I am gonna put a turbo blanket on my mini! Why don't car manufacturers add them if they have so many benefits? Lowering under hood temps, which prevents heat cycle failures if beneficial. It also offers better spools which is a plus? WHY WHY WHY?
Woah you have a lot to catch up on. I got rid of that almost a year ago to get a JDM Ef and turbo it. I didn’t “give up” I accomplished what I wanted to and it did awesome but if I kept the same car forever this channel would be extra boring I promise lol 😂 I build enjoy, sell or trade then repeat. I do intend to keep one of my builds. But I never “give up” on anything.
Finally got a chance to watch the new video, truck just keeps getting better and better! Love the build bro. Thanks for the great content, keep it up!
Thanks man appreciate it 😁
2001 B3000 261k miles still going.. I am the original owner. I'll never let it go. Been lookin for engines. Found this channel. Ideas.
They are such great trucks I am highly impressed. I still use it for it’s intended purpose too.’ It’s a great work truck!
"I just need a good parts truck. That's all it is for" (paraphrased from original truck video)
............ then turns it into a wicked blown K series swapped drift truck.
😄😄😄
Brother, I love your style!
🤣😎👊👊
Yea it’s still a good parts truck and that’s it’s main function too but.... now it’s fun lol
@@TexasHondaChannel perfect!
Man I love to see how much you’ve grown! I left for 5 months and I come back and you have so many dope builds now! I’m so proud that I’ve been able to see the growth! I know I’ve learned so much from you and it’s made me a better mechanic! I can’t thank you enough for sharing your builds and knowledge with us all! Hope you have a great day!
Thanks 🙏🏻 i have been working hard and a lot of my builds are going unnoticed and a lot of my subscribers left the channel. You for example left for 5 months!! I appreciate you coming back for more don’t get me wrong! Just wish more people seen it the way you do right now. I appreciate you!
@@TexasHondaChannel I went to boot camp and got hurt so that’s why I was gone I’ve been a loyal subscriber since the og civic days and it’s so dope to see
This is one wicked work truck! Every little bit helps this beast out. Keep it coming. 😃
Thanks! It works great as a work truck still too I love it
Glad you overcame that terrible situation.
Awsome video. I've been looking for a good blacket for my set-up. So I just bought myself the same one. Thanks.
No problem it works great 👍🏻 I prefer to use these ones they are cheap and do indeed work!
Man I love that little truck. And AJ come to Texas!!!
Woah you get a Gold start⭐️ first person to say that (Ajay come to Texas) ! ❤️
Yessss I’ll be back forsure I’m so ready I miss it so much!
Big improvement from taking forever to get up to 60mph in the beginning. Looking good bud
60mph is the end of 2nd gear 😁
A trick for the heater box. If you take it off the car you can duct tape pieces of cardboard wrapped in garbage bag on the inside to act as a form.
Been following all your builds, I love the truck. Thats one bad parts truck.
Thanks 🙏🏻 best parts runner I ever owned
WAy to handle the situation at the start👍
I try to resolve peacefully but if it’s my family over theirs I will always choose theirs. Only If it’s absolutely necessary
Man, two words: short shifter 🎉
I’m so ready to be back but with my family this time! We are gonna achieve so much together bro I can’t wait to see the future of Moore Motorsport and Texas Honda channel with both of us 🤙🏽 we are gonna hook this integra up also 🔥
Yes bro that’s the goal for sure bro!
Believe it or not, you may gain a little more spool when you hook up the turbo coolant lines! I drove my 58/55 turbo, only oil fed, and it spun slower by hand than when I added my coolant lines! I don't know how, because it didn't make sense to me, lol. My guess would be machining tolerances, and specific temperature windows....
And I love your comment about the ships at port! So sick of this garbage....
Yea have to keep it subtle or ill get "demonetized for false content" and your right he coolant lines might increase spool due to heat transfer and less expansion of the journal bearing it does indeed make sense if you think about it in REAL science ways. Hope you see what i did there with the "real science" way. Question everything.
Keep up the progress! I'm glad you & your family are safe.
The issue isnt whether they make the turbo spool up faster. Its whether all the heat being kept in th3 turbo damages the casting itself.....
Turbos are meant to be abused, as long as you keep them properly lubed with clean oil and don't go past what it's capable of making.
@@TheKleeFamily98 no and yes but mostly ppl are too impatient they close or open car really fast u should wait max 2minute when u open ur engine and close as well after 2minute
lets get AJ in texas
Yessss I’m so ready to be back, I miss it so much just trying to talk my fiancé into it 🤙🏽
Can’t wait to see what it makes
Same here but nervous as well because people always expect super high numbers right away haha
@@TexasHondaChannel definitely understand, and you got an a3…but a good 3 something in that lil truck will be nuts
I'm finally catching up man! Trucks freakin awesome! I'll let ya know when I'm going to AGN for my tune 😁
sweet sounds good!
Good shit bro keep at it
ayyy pt cruiserr
Awesome vid bro
Thanks 🙏🏻
When are you gonna hook up the water lines on the turbo ?
Gotta find the correct coolant lines I want to make it right. These turbos can run without them no problem up to 500whp seen it done but the sooner the better for longevity
Sweet
“Shout out to my wife”😂
Seems to be building boost about 200 rpm sooner.
280 rpm from what the math says 😁
Keep up the awesome vids!!
Thank you 🙏🏻
Need get ya a hydro brake in there
I was never good with the ebrake then power over drifting. I use to only use ebrake back in my FWD only days and was really good at power sliding and keeping it going but even with my 240sx and Miata and stuff it was better for me just using engine horse power to drift with. In this I was just messing around lol
@@TexasHondaChannel yeah I was more of a power over drifter as well even n my stock ca20de powered s12
280rpm sooner that’s awesome..hopefully mine gets similar results
Is it true In texas u can shoot first ask questions later if theyre on ur property
Been working on finding parts for a B20Z2 GT3582R RD1 build and this definitely convinced me to run water and oil cooled and run a blanket.
Were you walking it sideways in 3rd or 4th in the intro?
Love, love, love this damn build, man. It just keeps getting better!
And, AJ.
'Come to Texas!'
Nah that was just 1st and 2nd but if I had some curves to hit then I could have kept it going.
@@TexasHondaChannel I'm sure it'll smoke them off sideways through third. Those 225's are about useless at just 6.5 lbs. Lol. 😂
@@n.kempland2825 probably. I don’t wanna try though I won’t have tires left to drive on lol 😂
Hey man id love to get a set of motor mounts from you to do the same engine swap
I am not good at making mounts I had my friend do them and they still weren’t 100% where I needed them but they work. Best option is to set the engine where you want it and use cardboard to get a template then take the template to a machine shop of some sort and get them to make some solid steel mounts. If I could get Hasport to make some legit mounts that would be sick!
Ik this is old but you don't have issues running the 02 so close to the turbo?
Doesnt really matter, o2 sensors are built to withstand heat, some of them the ones without a heating element benefits being close to the turbo like that
I am gonna put a turbo blanket on my mini! Why don't car manufacturers add them if they have so many benefits? Lowering under hood temps, which prevents heat cycle failures if beneficial. It also offers better spools which is a plus? WHY WHY WHY?
Because in the long term will damage your turbo faster. Because the heat dissipation is slower when the car stops. Another youtuber discussed this.
ruclips.net/video/vJrYZ3aeENM/видео.htmlsi=VO-e-bUt2naXOvVC
did you give up on the em2?
Woah you have a lot to catch up on. I got rid of that almost a year ago to get a JDM Ef and turbo it. I didn’t “give up” I accomplished what I wanted to and it did awesome but if I kept the same car forever this channel would be extra boring I promise lol 😂 I build enjoy, sell or trade then repeat. I do intend to keep one of my builds. But I never “give up” on anything.
@@TexasHondaChannel i just remembered when you said you would update us when you installed the AC!!! did i miss it?! haha!
@@TexasHondaChannel how did you like the em2!! i would’ve loved to see it turboed!
@@TexasHondaChannel can i use a 06 si civic transmission with the em2? do you know my man?
@@TexasHondaChannel with it kswapped of course
What city r u in bro.. am from brownwood
I’m near Fort Hood
@@TexasHondaChannel sweet!!! Not to far !!!!!
3:35