Insignia Fire TV won't get past language screen. The only REAL FIX!
HTML-код
- Опубликовано: 25 окт 2024
- This is an Insignia 50" Fire Edition TV model NS-50DF711SE21 that boots up and won't get past the "Select Language" screen. After you select the language, the Fire TV then tells you to pair the remote. Obviously the remote control is already paired because you can power on the TV, use the volume, select the language, and hit the "Back" button.
This is the only real fix for this Insignia Fire edition television that won't let you go any further than the "Choose your language" screen and trying to pair your remote.
Insignia Fire TV: Factory Reset without Remote
• Insignia Fire TV: Fact...
Fire TV Mainboard's
www.ebay.com/s...
The ART of Troubleshooting and Repairing Modern Television
bigdogtvrepair...
Have an Insignia 49" standard model I paid $180.00 for & it's great. Had it for about 5 years with not one glitch.
I dunno if this was a main board issue, I read there is an app you can go in and remove the paired remotes. it has the ability to pair 7, after that it won;'t pair anymore. But i dunno, just what I read.
I had a small 24 inch Insignia Fire TV that had this problem. I brought it outside and smashed it to bits. Best solution I’ve found. Garbage.
I Love It!
Me too had same problem ,just throw it away never buy that brand again.
i had the same issue with a toshiba that i did a factory reset on without the original remote. I had to use the phone app as a remote to get through the setup. Had to connect it to the ethernet first though since wifi options are later in the setup
Ima try this with wired internet connection I have the same issue
Did you have any issues pairing during setup with your phone app? For some reason I’m not having luck
Connected my Ethernet cable phone app not finding tv
@@Havinnnnnnn I had this same issue I couldn’t pair my remote on my phone with my tv when it started up to set the fire tv up
What phone app?
I had a similar problem with mine. The issue is that there are TWO communication paths for the remote. IR and bluetooth. IR works fine. But these TVs won't pair to a new remote (except the original) in bluetooth mode. You cannot pair a new remote via bluetooth without the original, as best as I can tell. Stupid design. I replaced my remote but am stuck with only IR mode working. Certain things like voice only work in Bluetooth mode, though.
Thanks
so with the new board you're in the same boat if you do a factory reset
@@keithchatman4225this won’t work if you did a factory reset ? And don’t have original remote ?
No, it doesn't connect to your modem, it connects to your router and splits off of that.
I wonder if there is some kind of reset instead of replacing the main board?
Like the way the back comes off. Clever.
Use hydrogen peroxide & micro fiber towel to clean the screen.
Hello, I’m trying desperately to find a course for people with very little electronics experience. I wanted to take your course but it says it’s for experienced only sad😢 please help! TV repair is becoming a lost art.
I was hoping to see a firmware flash or something, instead of a whole board replacement....
None available yet....
Hello sir....thx for owsome videos...have questions?
I have a toshiba 55 led tv with backlight problem..when ii turn on tv it blinks but after some times it works again
I tested leds and all led strips are fine...
I have a fire tv NS-50DF710NA21. I had a aftermarket remote. I factory reset the TV and then the remote would not pair. It would allow me to turn the TV on, select English, and turn the TV off. In these comments and in another thread I found suggesting using original remote. I ordered an original remote and then I was able to pair to the TV and everything worked as normal. If you're having this issue I would suggest an original or factory remote before the expense of a new board.
What’s the original remote ?
Had a similar thing with TCL Roku 55' that I had been given. It was a brand new TV that never worked out of the box. Replaced the Main and still would not get past half way through set up. I kept trying and finally it hooked up to internet and was able to update software and began to operate correctly. It was dumb luck. lol
Can we order backlights from you company? I got a 65 insignia with a backlight fail,Flashing picture but everything else still works..
My fire tv remote won’t pair with my fire tv. I tried everything and nothing works. Even factory resetting. Does that mean the tv’s main board isn’t working?
Hi big dog i have 50 inch tv pioneer pdp 5070pu only clik the relay can you help me thank you
What about when you don’t have a remote for your fire TV and you factory reset it
Any luck ? I did the factory reset and dont have original remote anymore. 😢
And what if you replace that module and it does the same thing?
Then U have a bad module.
Dear Sir Im from the Philippines my tv is a TCL.. it stop ang hanging logo only can see ,can you help me ,kidly help me, how can I reset it? it does have any reset button,I also tried by using on,off button to reset it, just like it should be, kindly help me pls. Sincerely yours Jose from the Philippines, thank you.
I can't get remote to pair bought new fire stick can't watch TV at all can you help me
Yeah in the same boat. I did factory reset and don’t have original remote anymore. I didn’t know you needed to have original remote if you did factory reset. To do Initial set up only with original remote
Have you considered contacting insignia and asking for a service manual & remote?
At least you have the proof and the problem in your videos.
So explaining the fault should not be a problem to insignia.
I think a service manual & remote must be required to fix this kind of fault.
Is it an LCD?
I am from Canada 😂😂😂❤
Me 2 eh!
this is the issue im having i have 2 remotes to try but I just want to use the tv for gaming.
But it scrolled down the language section.. Weird.
18 year old tv.
👍👍👍👍👍👍
Cheap easy fix.
This dude is lying just get the right remote, the one that came with the tv' has a blue button at the top!
👍 😕