Installed paddle shifter in my 2014 Dodge Charger R/T, test drive at end of video
HTML-код
- Опубликовано: 5 окт 2024
- Testing the buttons at 27:20
Activating paddle shifter at 28:29
Test drive at 30:52
Tools needed:
10mm socket - for battery and bolts holding air bag
3/8in hex driver bit- Bolt holding steering wheel to column
T-20 driver bit - screws on back of steering wheel
Flat bladed screwdriver - removing airbag bolt covers
Programmer to turn on paddle shifter - I used Z Automotive, Tranzformer Gen II
Part numbers:
Light Shift Paddle - 1YR89DX9AA
Left Shift Paddle - 1YR88DX9AA
Right Shift Paddle Bezel - 1YT66DX9AA
Left Shift Paddle Bezel - 1YT67DX9AA
Rear Cover - 1XW251X9AA
Wiring Harness (Non-Heated Wheel) - 68196079AB
Steering Wheel Bolt - 6511907AA
Link to dasllamas install tutorial:
• Dodge Charger 12 - 14 ...
Glad to see everything worked out. Good thing you didn't strip that steering wheel bolt or break that torx bit with that dewalt compact impact wrench. I just bought a 1/2 inch dewalt impact wrench today too. I wonder if it would have stripped or broke using that on that steering wheel bolt, 🤔 Lol. I want to do this upgrade on my 2013 300c. I already have the tazer installed, just need to look up the parts or find a steering wheel that has the paddle shifters already on that I can make a direct swap to.
My impact wrench is not very strong. It will not even remove lug nuts.
Cool socket wrench though.
@@humanoid7765
Just used the DCF 900 on the steering wheel bolt with a 10mm hex standard socket from HF and used an 1/2 to 3/8th adapter it came off instantly with no resistance. Maybe I was lucky but I had nobody to help me to I took the chance.
@@danielgiglio4689 nice.
Can you change a 2015 Dodge Charger column shifter to a floor shifter
I know you can for 2011 to 2014. I would assume you could for a 2015. You may want to ask on www.chargerforumz.com
What is the heated steering wheel wiring harness part number?
I don't know since I didn't have a heated steering wheel. You may want to check Charger forums www.chargerforumz.com
You may also try contacting Steve White Motors. I ordered some of my parts from them.
www.stevewhiteparts.com
I have heated wheel do you know part number to the one with heated wheel?
I don't know. You may want to ask on www.chargerforumz.com to see if they know. The strange thing is, the harness I got had an extra plug on it. There is a place for it to plug into on the steering column but there is no wires on that end. Maybe this is for the heated steering wheel or some other option I don't have?
What do you have to do to program the paddle shifters?
I used a Tranzformer Gen II made by Z Automotive. There is an option to turn on the paddle shifter in the options menu.
How did your friend get the screw to loosen up?
I held the steering wheel while he used a breaker bar.
what do you need the wiring harness for
It's for the paddle shifters. The non-paddle shifter equiped cars do not have the appropriate plugs for the paddle shifter to plug into.
How much was it for everything?
Around $300 for the parts.
where you find the real bezel?
Steve White Motors in NEWTON, North Carolina
www.stevewhiteparts.com/