@@oxyeekithebeatgod2501 I only have a personal IG. I currently bought a bull boost manifold for 9th gen that was under $100 due to manufacture defect, and would have to get re-welded. I’m going to also run a rev9 rsx intercooler kit for under 400$ and I’m also going to run a rev9 turbo 6062 for under $300, I will run bull boost wastegate and blow off valve, I’m going to feed the turbo via the oil pressure sensor with an adapter piece & I will drain the oil with a drain plug / an10 fitting drain plug, I don’t plan on drilling a whole on the oil pan and want to do the least amount possible, I was going to do it via the timing chain tensioner cover but heard in one video were guy said he’s had problems that route via 9th gens. With all that I plan on only pushing around 9lbs of boost through the car and hoping for 400w were others only reached 360w on stock setups.
@ ok bet, I was curious as to how I should go about build my turbo kit. I see the ones online and I’m like, with that amount of money, I might as well just get what. So what’s the first thing I should focus on purchasing? A turbo? I was gonna get all my piping from vibrant and get it fabbed up locally. I’m just trying to make a list of what I focus putting my money towards first. That’s what’s up yo, I’ll be following your build, keep up with the vids🫡
@@oxyeekithebeatgod2501 Turbo Kit Bull Boost turbo manifold- $100 Rev9 6062 turbo- $300 Rev9 rsx intercooler kit- $ 375 Tial Q BV50- $55 Uni eBay 40mm WG- $63 Turbosmart 7psi spring- $50 Uni oil feed/drain/adaptors/vacuum lines- $75 AI 1000cc- $450 DC5c MAF-IAT harness- $33 ------ $1,501 This is were I’m at right now, I’ll keep updating this feed, I’m constantly changing and adding different items but this is majority of everything you’ll need to run the whole kit cold side with the hoses, I just have to see how much the hot side will be and try to mock up a downpipe for the turbo. I think maybe up to $1700 for the whole turbo kit routed and hooked up but it’s not including the exhaust side with the waste gate dump tube I’m still working on that part.
Yes, that one RUclipsr is great working on his 9th gen, but I think acuity sells that sensor extension to reach.
@@oxyeekithebeatgod2501 nice, mine was a different manufacture and bought for roughly $30-50
@ that’s what’s up. Also you got ig? I plan on going boosted as well. Wanted to bounce a few questions off of you if you don’t mind.
@@oxyeekithebeatgod2501 I only have a personal IG.
I currently bought a bull boost manifold for 9th gen that was under $100 due to manufacture defect, and would have to get re-welded. I’m going to also run a rev9 rsx intercooler kit for under 400$ and I’m also going to run a rev9 turbo 6062 for under $300, I will run bull boost wastegate and blow off valve, I’m going to feed the turbo via the oil pressure sensor with an adapter piece & I will drain the oil with a drain plug / an10 fitting drain plug, I don’t plan on drilling a whole on the oil pan and want to do the least amount possible, I was going to do it via the timing chain tensioner cover but heard in one video were guy said he’s had problems that route via 9th gens. With all that I plan on only pushing around 9lbs of boost through the car and hoping for 400w were others only reached 360w on stock setups.
@ ok bet, I was curious as to how I should go about build my turbo kit. I see the ones online and I’m like, with that amount of money, I might as well just get what. So what’s the first thing I should focus on purchasing? A turbo? I was gonna get all my piping from vibrant and get it fabbed up locally. I’m just trying to make a list of what I focus putting my money towards first. That’s what’s up yo, I’ll be following your build, keep up with the vids🫡
@@oxyeekithebeatgod2501
Turbo Kit
Bull Boost turbo manifold- $100
Rev9 6062 turbo- $300
Rev9 rsx intercooler kit- $ 375
Tial Q BV50- $55
Uni eBay 40mm WG- $63
Turbosmart 7psi spring- $50
Uni oil feed/drain/adaptors/vacuum lines- $75
AI 1000cc- $450
DC5c MAF-IAT harness- $33
------
$1,501
This is were I’m at right now, I’ll keep updating this feed, I’m constantly changing and adding different items but this is majority of everything you’ll need to run the whole kit cold side with the hoses, I just have to see how much the hot side will be and try to mock up a downpipe for the turbo. I think maybe up to $1700 for the whole turbo kit routed and hooked up but it’s not including the exhaust side with the waste gate dump tube I’m still working on that part.