When I first saw a TSX wagon a few years back I was amazed from the look of it. Now I have a TSX sportwagon of my own and it's very nice, good trunk space and excitingly quick, of course it's not a high performance luxury vehicle but the paddle shifters are neat to use. The only problem I have is the side window molding trim wearing off, it's hard trying to find one that fits since most moldings only fit on the sedan trims. Nonetheless, it's my daily to work and I hope to add some wheels and window tints.
I came here to ask the same question about the rear door beltline mouldings. The rubber is deteriorating so bad. Did you find any? There used to be an eBay seller who showed a picture of the wagon, but the strips themselves were for the sedan. Disappointing!
Hey! awesome work man! looks great! I've got a Honda Accord Tourer MK8 CW3 2012 model, im looking for bumpers and skirts, yours looks awesome! where did you get it? did you also do something with the exhaust?
Amazing work on the wagon, Richy! I have a 2011 in that same dark anthracite mettalic. It's been one of my favorite cars I've ever owned. Hey, you're inspiiring me to clay bar and ceramic coat it, once it's not 107 here in TX. Like another commentor, I'm looking for those rear door beltline mouldings. Any suggestions?
I picked up a set of these wheels for my 2012 wagon. Question, did you just swap over your TMPS sensors to the Accord wheels? Will TPMS system lights stay off after doing so? Thanks.
I love this vehicle. Didn't know it existed until a few months ago. Great car, great vid, but could you please fix the lighting next time? The video was so dark while doing the work.
Awesome video! Looking to install type s side skirts too. How'd you attach the side skirts to under the wagon? I see you used a drill for something?! Please let me know thank you!
is there any gaps between the skirt and the rocker panel? where you stuck the magnet on the in skirt, my skirts won’t stay stuck onto the car and wanted to see how they have held up for you, i used double sided tape and they stay stuck on just that weird beveled top part of the skirt won’t stay stuck
i know this is too much to ask but can i get a parts list, im trying to get those Type S front splitters things (correct me if im wrong) and also the side skirts. Want a nice looking daily so for me its a must have. Dope TSX man, wish i could keep my paint looking that good.
The side skirts came with the car when I bought it but I believe you can find most of the exterior pieces on MV tuning website if you Google them. It’s on Airlift 3P air ride kit and 19” Honda accord touring wheels. Other than that there’s not much to this car. Appreciate you watching!
@@richycontreras thank you man, really appreciate the help 🙌🏽🙌🏽 means the world. just hope i can save up and have no issues since i see the currency is different. they have most of what i want to do!
Is this a slow car? I know it handles well. But 170 lb-ft torque isn't much. Saab 9-3 wagon, Volvo V50 T5 and V70 all have north of 220hp and 220 torque.
Yes they’re slow. It’s a good economical daily with some space and that Honda reliability. I got it for that purpose. I have my other cars that are fast for fun and drifting.
Guy's I need help badly a friend of mine gave me a Mugen I THINK A 626 WAGON gtr LM and it BEAT MY Z06 6SPD AND I'M PUSHING 850 HP WHAT IS THIS THING MY 1ST IMPORT???
Much respect for flossin the OEM wheels. Acura spa day, keep it wagon.
When I first saw a TSX wagon a few years back I was amazed from the look of it. Now I have a TSX sportwagon of my own and it's very nice, good trunk space and excitingly quick, of course it's not a high performance luxury vehicle but the paddle shifters are neat to use. The only problem I have is the side window molding trim wearing off, it's hard trying to find one that fits since most moldings only fit on the sedan trims. Nonetheless, it's my daily to work and I hope to add some wheels and window tints.
I saw my first TSX wagon back in 2011 coming over a bridge, the grill and light design (whole front end) impressed the hell out of me!
I came here to ask the same question about the rear door beltline mouldings. The rubber is deteriorating so bad. Did you find any?
There used to be an eBay seller who showed a picture of the wagon, but the strips themselves were for the sedan. Disappointing!
@@michaelanderson6155 Sadly not, I looked through every site and forums to see but nothing.
Clean! 👌🏽😮💨 did you vinyl wrap the skirts as well?
Those wheels look so good!! Maybe i should get some for my base 2010 tsx
Thanks man!
Damn it looks amazing dude. Im on the verge of possibly picking one of these up this week, also in black.
Thanks man! You’ll love it
Hey! awesome work man! looks great! I've got a Honda Accord Tourer MK8 CW3 2012 model, im looking for bumpers and skirts, yours looks awesome! where did you get it? did you also do something with the exhaust?
Loved the video!!!! Love the car!!! Those honda wheels are one of the best looking stock wheels ❤ awesome car, makes me want to customize my TL
Thanks so much for the feedback! Do it. TL’s are so good
amazing video ! I own a Honda Accord Tourer and I love the car !
Amazing work on the wagon, Richy!
I have a 2011 in that same dark anthracite mettalic. It's been one of my favorite cars I've ever owned. Hey, you're inspiiring me to clay bar and ceramic coat it, once it's not 107 here in TX.
Like another commentor, I'm looking for those rear door beltline mouldings. Any suggestions?
Thank you! Unfortunately I don’t have any recommendations for you but I appreciate you watching and leaving a comment!
I picked up a set of these wheels for my 2012 wagon. Question, did you just swap over your TMPS sensors to the Accord wheels? Will TPMS system lights stay off after doing so? Thanks.
I’ve been waiting for this one!!
Thanks Sam! Appreciate you always watching 🙂
I love this vehicle. Didn't know it existed until a few months ago. Great car, great vid, but could you please fix the lighting next time? The video was so dark while doing the work.
Nice! Please consider posting details on the part # for the side skirts. I have 2013.
🖖
Sorry I got the skirts included with the car so I don’t know what the part number is
How’s the magnet holding up over time? Do you have any other type of support on the rear end of the side skirt beside magnet?
@@lltysonll still holding up great! They are fastened still with screw and the magnets up top.
What are suspension are you running? Also this thing is super super clean💪🏽
Thanks man! It’s Air lift 3P
Great Job ! Looks Fantastic !
Thanks so much!
Cw2 are so sick currently still drive cu2 and previous cl9
Awesome video! Looking to install type s side skirts too. How'd you attach the side skirts to under the wagon? I see you used a drill for something?! Please let me know thank you!
Thank you! Appreciate you watching. I just used stainless self tapers and washers to secure everything on.
is there any gaps between the skirt and the rocker panel? where you stuck the magnet on the in skirt, my skirts won’t stay stuck onto the car and wanted to see how they have held up for you, i used double sided tape and they stay stuck on just that weird beveled top part of the skirt won’t stay stuck
They sit perfectly flush and still work perfectly fine for me with daily driving
Can you give details on the headlight restoration.. mine don’t stay long after I do them
They were ppf’d after they were buffed so they stay clear
How much would it cost me to bring my wagon to you to get a bag system installed?
It looks amazing! 🖤
Thank you 🫶
My dream car 🔥🔥
I keep running into tsx wagon videos and I’m now starting to regret selling mine 😤
They’re so good and it’s nice being in a vehicle that’s very rarely seen!
i know this is too much to ask but can i get a parts list, im trying to get those Type S front splitters things (correct me if im wrong) and also the side skirts. Want a nice looking daily so for me its a must have. Dope TSX man, wish i could keep my paint looking that good.
The side skirts came with the car when I bought it but I believe you can find most of the exterior pieces on MV tuning website if you Google them. It’s on Airlift 3P air ride kit and 19” Honda accord touring wheels. Other than that there’s not much to this car. Appreciate you watching!
@@richycontreras yo thanks for the reply man 🙏🏽🙏🏽 at 9:45 where did you get those? Also i can’t wait for new vids with the TSX my man
@@ChickenJoe2920 no problem! Those are off MV tuning that I suggested
@@richycontreras thank you man, really appreciate the help 🙌🏽🙌🏽 means the world. just hope i can save up and have no issues since i see the currency is different. they have most of what i want to do!
What did you use for the headlight restoration? I am looking to do the same with my wagon.
Hey! We use Oberk cut with a 3” wool pad and Sonax polish with a yellow foam pad
@@richycontreras thank you so much!
Is this a slow car? I know it handles well. But 170 lb-ft torque isn't much. Saab 9-3 wagon, Volvo V50 T5 and V70 all have north of 220hp and 220 torque.
Yes they’re slow. It’s a good economical daily with some space and that Honda reliability. I got it for that purpose. I have my other cars that are fast for fun and drifting.
Tire size?
I need one supper clean 🤙
Would swap out the Honda wheel logos with Acura ones
Very clean
Appreciate it!
Love the car. Never been a fan of the new accord wheels🥲
Guy's I need help badly a friend of mine gave me a Mugen I THINK A 626 WAGON gtr LM and it BEAT MY Z06 6SPD AND I'M PUSHING 850 HP WHAT IS THIS THING MY 1ST IMPORT???
Hi from Ukraine 🇺🇦 dude 👋
I have wagon too, and i search some awesome rims, please tell me what the size of you rims? ….r19, 8.5j? Thanks 🙏
Hello! Yes they are 19’s. Factory Honda Accord touring wheels so I believe they are either 8 or 8.5j.
@@richycontreras8j ET50?…..what the size of tires you have?….215/35/19?
😍😍😍😍😍😍😍i loved
you gotta type r swap the engine and manual swap
What wheels are those dam❤
Nice...