Intake Manifold Cleaning and Reinstallation Part 2 - Hyundai Accent
HTML-код
- Опубликовано: 29 сен 2024
- This is the second part of the video.
The removal of the intake manifold of this Hyundai Accent is a difficult job. It requires a specific tool to get the job done. Take note that 3/8's socket sets are useful in this job.
- hyundai
- diy
- intake manifold
Video Links:
Intake manifold removal, cleaning, and reinstallation:
Part 1:
• Intake Manifold Remova...
EGR assembly removal, cleaning, and reinstallation:
Part 1:
• EGR Assembly Removal P...
Part 2:
• EGR Assembly Cleaning ...
"PLAYLIST" Hyundai Accent EGR and Intake System Comprehensive Maintenance:
• Hyundai Accent EGR and...
Car used for demonstration: 2017 Hyundai Accent Hatchback CRDi
Applicable for the following models:
Hyundai:
- Verna
- Solaris (Russia)
- i25 Accent (Colombia, Israel)
- Grand Avega (Hatchback, Indonesia)
- Excel III (Sedan, Indonesia)
- Grand Pony (Sedan, Colombia)
Dodge Attitude (Mexico)
BGM:
RUclips Audio Library
Nite Foul - Noir Et Blanc Vie
Thank you very much and God Bless.
#andredraftproject #hyundai #accent #crdi #intake #manifold #cleaning #reinstallation
Muchas gracias amigo desde chile
Logre hacer este manteniendo siguiendo tus videos esta muy bien explicado paso a paso muchas gracias!
Me alegro de escuchar amigo! Muchas gracias y cuídense.
Hola amigo! Como te va? Quería saber que tal te corre el carro después del servicio. Si viste diferencia?
@@nathanosman5606 cambia bastante en potencia y economia . Lo estoy haciendo cada 6 meses aprox.
Te recomiendo hacerlo notaras los cambios y alargar la vida de tu maquinon !
Bat d mo tanggalin yang mga flap e natatangal yan..para d ka mahirapan maglinis
Me install oil catch can so no oil entering intake manifold.Manifold always clean,no cleaning.
Definitely a good mod
intake manifold to cylinder head torques for bolts and nuts should be between 19.6 - 23.5N.m
Thanks for the info!
can i pay you to do this to my car
Can you please answer me , where is PCV valve on this engine?
There is not pcv valve the valve cover have build in oil retainer which stops oil going through to the intake which is a bad design and oil still passes through
@@Damian-ik1jt thank you
Is it safe to use carb cleaner on the intake manifold
Yes. I use it on tough carbon stains.
Nice one
Thank you!
Master thank you
Thank you too!
Nice work
Thank you so much!
❤👍
Thank you!
Super Video danke
Thank you very much too!
Bitte. Vielen Dank auch!
After watching all of those videos, I can say that disassembling the intake manifold and egr is quite difficult.
Question:
Can you remove the manifold without using a size 12 deep/narrow socket? I only have the regular sockets with extensions.
Thank you very much for watching my videos! Yeah, it is a difficult job.
I've already tried two different brands of sockets. Both are short and 12mm and none of them worked. By the way, I am using a 1/2 drive.
Since I was using a 1/2 drive, I used a long/deep 12mm socket to solve that problem. The part of the body of the socket where the extension attaches is too large for it to pass through.
I haven't tried this but I guess if I was using a 3/8 drives, it might have worked since it has a smaller extensions and socket dimensions which pass through in between the intake manifold and bolt.
It was a nightmare. Hyundai i30 very similar so used this video. Nothing on this car is easy everything is in the way. Had to take so many parts off even including the thermostat flange.
I used ¼ inch drive extension and sockets for the manifold and a few other bits, just no room. At least with the i30 I didn't have to remove the bumper.🙄