This is great. If you ever do it again.....Please slow the down the vid to a speed we can understand. It is to puzzling this fast. I like it..... I just cant tell what is going on to try doing it myself.
I'm assuming you had a large sheet of unidirectional carbon fiber you cut to end up with a diagonal grain? Is there a structural benefit to diagonal grain or is it just for aesthetics? Thanks.
kousakunin2008 Do you have any idea where I can get Mylar? I can’t seem to find it anywhere. 14 mil, right? Thanks. I love this series on wing bagging. Nice work.
Hello - can you share with us your UD carbon tape supplier? I’m looking for it 8 weeks continued but nothing I found is even nearly similar to 0,028mm thickness and 4g/m - for me impossible to get…. Your help would be very appreciated!
I asked the store where I purchased the UD tapes below if they could ship internationally, but unfortunately they answered that they could not. shop.lab-cast.com/?pid=93479124 You may be able to find a UD tape with a narrow width, so please look for it. It can also be substituted by using narrower ones in parallel.
Around 40g/sqm For reference below are the URL of the materials. +Reasonable one(Both are fine) www.hyperflight.co.uk/products.asp?code=CARBOLINE-SC39-2-30&name=carboline-sc39-2-30-spread-carbon-fabric-30-39g-m www.hyperflight.co.uk/products.asp?code=CARBOLINE-SC39-2-45&name=carboline-sc39-2-45-spread-carbon-fabric-45-39g-m +Another one (It is better to use it properly on the front and back of the wing. However, the same one can be used for the front and back.) shop.cn-models.com/carboweave/cw-40-2-45-45 shop.cn-models.com/carboweave/cw-40-2 +For competition (It is better to use it properly on the front and back of the wing. However, the same one can be used for the front and back.) shop.cn-models.com/carboweave/cw-39-2-2 shop.cn-models.com/carboweave/cw-39-2
Realy helpfull !!! great video you have to play several time in order to catch "all" the detail... One question : which thinkness is your mylar film ? (190 µm, 250µm or 350µm). Thanks
With the very thick Mylar, the risk is to not be able to bend it enough at the leading edge. Is it the reason why you are doing the part in 2 phase before the skin and after to finish correctly it ?
@@gaderyfr8485 all readt did !!! for days and in some og the coments people said that are for moulding because it has a negative slight angle that make it difficult...so do you recomend me to use this airfoild anyways or try de V2 ? thank you
@@magneresjuan you can use the synergy without problems, I do it with all my f3k wing and I don't have any problems. The zone v2 is also a good airfoil but the synergy is better
@@magneresjuan if your skilled enough withe the hot wires you can try to put the - 1° otherwise do it without the - 1° and you will add by triming the servo. The last wing I've done was with the - 1° but it didn't came as nice as I wanted
Hello, beautiful DLG !! Can I ask an information? What do you use to keep the templates of the wing airfoil on the polystyrene panel? With what material did you make the templates of the profile? Thanks!
For your referance, a rough estimate below core:USD20$ spread carbon:USD62$(Carboline SC39/2/30 ) carbon UD tape:USD30$ epoxy resin:USD30$ kevlar(for hinge):a little
@@kousakunin2008 Are you selling finished models? I checked out your website, but couldn't find any links to costs/purchase links. Plane looks amazing!
Real nice, have all tools to get it on, but... i need a Carbon wing for " REAL high tempo...want to Crack my 450 kmh record.. at Time.. stays by 550 kmh. ( what shoud i use for the wing from Material... carbon, o. that 3Mstuff... with the karo's...its superlightweight.. but with that G force the wing gets wrippet.. explodes! .. .. for the Wing so light it only get, but.. with a selfwindet 6 Pole IP brushles.. with a Enc.. with up to 400A .. Place for 2 x 8s ... so with 16s & 400A ... what Material can i use to get not ripped apart. ( Carbon & what mm. .. i think 1 layer straight & One. 180° ( + x from the fibres & the rowings " Carbon Layers... & with epoxid & thats the Thing! ... at the edge i have to made a carbonpowder- .. with epoxid & carbondust .. to get a perfeckt wing, that ripps not... ( looks like black silicone... what i can do better for get the 2 wing-sh. strong boundet? .. ( & clear i have to selfwinde my Brushless Motor. Man, what a Projekt.. Need so much Info befor i made nonsenc the 2 Time... na 300kmh pylonracer are great... but 300 & up to 500... thats allot & i hope kg dont ripps apart
Congrats for your build, it´s beautiful and you have a great tecnique, wich airfoil did you use ? im about to start to build one but don´t know wich is the right airfoil for a DLG 1.5 M of wing. Thanks
@@eraserma2212 yes it is not easy the paint thing. But those reds on the wing looks great ! it i no paint? Did you find very difficult to build a Synergy II on bagg? I found out very difficult to respect that 2° curve this wing needs, how did you do it?
Disappointed that this video is lacking in any information whatsoever. Even slowed down to the lowest speed possible, it was useless. This could have been one of the best videos on this subject. Why did you release the video like this?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
What a beautiful work of art !! The best vacuum bagged dlg wing i have seen so far... I would like to see more videos of this kind !
Evident here is an astonishing level of manual skills, patience and finesse.
I can't thank you enough for what you've posted on your channel and website so far. It helped me a lot! Thank you very much!
It was good to be of help.
I would pay for a DVD of this with step by step method and materials required. Well done mate I love it.
I would pay also!
same
Yup me too. Master crafts man
I think I’ll try to build one of these on my lunch break tomorrow. Beautiful work!
Jeffrey Moore if you could rattle me one up after breakfast mate that would be great.......
I would have thought you could get two or three knocked out, just before breakfast to be honest
would be nice to see and hear actual details on your process
it gives me a hint but not enought to replicate
Looks like a very nice poly airfoil.
This is great. If you ever do it again.....Please slow the down the vid to a speed we can understand. It is to puzzling this fast. I like it..... I just cant tell what is going on to try doing it myself.
I’m making new one and posting step by step video.You can see it on my channel.
Fantastic work! I'll be making one one day
UD tape as in the video - we can get from CN-Models where the most of his used fabric came from!!!!
Happy building to everyone 😊
Amazingly well done!
extremely good video please more of it👍
beautiful. nice work.
Very nice:) keep going on with your series
Great work
I'm assuming you had a large sheet of unidirectional carbon fiber you cut to end up with a diagonal grain? Is there a structural benefit to diagonal grain or is it just for aesthetics? Thanks.
Thank you for watching my video. I'm trying to place the UD tape preferentially on the thick part of the wing
kousakunin2008 Do you have any idea where I can get Mylar? I can’t seem to find it anywhere. 14 mil, right? Thanks. I love this series on wing bagging. Nice work.
What type of cf is used here dry, prepreg or standard with epoxy?
It's special carbon for model glider.
shop.cn-models.com/carboweave/
Hello - can you share with us your UD carbon tape supplier?
I’m looking for it 8 weeks continued but nothing I found is even nearly similar to 0,028mm thickness and 4g/m - for me impossible to get….
Your help would be very appreciated!
I asked the store where I purchased the UD tapes below if they could ship internationally, but unfortunately they answered that they could not.
shop.lab-cast.com/?pid=93479124
You may be able to find a UD tape with a narrow width, so please look for it. It can also be substituted by using narrower ones in parallel.
Nice tutorial. What is the density of the carbon fibre?
Around 40g/sqm
For reference below are the URL of the materials.
+Reasonable one(Both are fine)
www.hyperflight.co.uk/products.asp?code=CARBOLINE-SC39-2-30&name=carboline-sc39-2-30-spread-carbon-fabric-30-39g-m
www.hyperflight.co.uk/products.asp?code=CARBOLINE-SC39-2-45&name=carboline-sc39-2-45-spread-carbon-fabric-45-39g-m
+Another one
(It is better to use it properly on the front and back of the wing. However, the same one can be used for the front and back.)
shop.cn-models.com/carboweave/cw-40-2-45-45
shop.cn-models.com/carboweave/cw-40-2
+For competition
(It is better to use it properly on the front and back of the wing. However, the same one can be used for the front and back.)
shop.cn-models.com/carboweave/cw-39-2-2
shop.cn-models.com/carboweave/cw-39-2
@@kousakunin2008 Thanks a lot for the detailed links
Realy helpfull !!! great video you have to play several time in order to catch "all" the detail... One question : which thinkness is your mylar film ? (190 µm, 250µm or 350µm). Thanks
Regarding the mylar, the thicker one will finish better.
With the very thick Mylar, the risk is to not be able to bend it enough at the leading edge. Is it the reason why you are doing the part in 2 phase before the skin and after to finish correctly it ?
Shave the leading edge thinly in a tapered shape to be easily bend.
Please refer my website below.
kousaku.sakura.ne.jp/RC/wing_seisaku3.htm
Which airfoils did you use?
hi, i'm interested in doing a DGL. could you help me? I need to know the size of the carbon fiber and the type of foam I use. thanks
where do u cooked carbon fiber? carbon fiber has to be cooked some hours in the autoclave at 160 200 c°
For this use, strength can be secured by curing at normal temperature without baking.
is the foam core made by a CNC or is it also from a mold?
This is not a CNC cut core. Please see below.
ruclips.net/video/4p_7NNirNt8/видео.html
How do you know how much resin you put on?
I'ts hard to measure while working.
As a guide, touch the back side of carbon spread with your hand and slightly stick it.
are his "synergy II" airfoils wing strictly for molding, or also suitable for bagging? I have only bagging for now
synergy II is made for both molding and bagging. You can read all the information on the rcgroup thread
@@gaderyfr8485 all readt did !!! for days and in some og the coments people said that are for moulding because it has a negative slight angle that make it difficult...so do you recomend me to use this airfoild anyways or try de V2 ? thank you
@@magneresjuan you can use the synergy without problems, I do it with all my f3k wing and I don't have any problems. The zone v2 is also a good airfoil but the synergy is better
@@gaderyfr8485 ok thanks! Donyou respect this -1 degree angle ir just do the wing flat with no angle ?
@@magneresjuan if your skilled enough withe the hot wires you can try to put the - 1° otherwise do it without the - 1° and you will add by triming the servo. The last wing I've done was with the - 1° but it didn't came as nice as I wanted
Size Millar plastic thickness?
Hello, beautiful DLG !!
Can I ask an information? What do you use to keep the templates of the wing airfoil on the polystyrene panel?
With what material did you make the templates of the profile?
Thanks!
Generaly templates are made from soft aluminium. You can fix the templates with nails or needles.
I use 0.3mm aluminium plate.
That's such an amazing job. How much would you say this cost, just materials. A rough estimate if you can would be great
For your referance, a rough estimate below
core:USD20$
spread carbon:USD62$(Carboline SC39/2/30 )
carbon UD tape:USD30$
epoxy resin:USD30$
kevlar(for hinge):a little
@@kousakunin2008 Are you selling finished models? I checked out your website, but couldn't find any links to costs/purchase links. Plane looks amazing!
@@kousakunin2008 What kind of resin do you use for this? What kind of resin does not melt foam? Thank you.
Araldite 5052 is the best resin for DLG. It does not melt form.
Thank you for asking. I sometimes make it by someone's order. However, It is difficult to ship overseas.
Real nice, have all tools to get it on, but... i need a Carbon wing for " REAL high tempo...want to Crack my 450 kmh record.. at Time.. stays by 550 kmh. ( what shoud i use for the wing from Material... carbon, o. that 3Mstuff... with the karo's...its superlightweight.. but with that G force the wing gets wrippet.. explodes! .. .. for the Wing so light it only get, but.. with a selfwindet 6 Pole IP brushles.. with a Enc.. with up to 400A .. Place for 2 x 8s ... so with 16s & 400A ... what Material can i use to get not ripped apart. ( Carbon & what mm. .. i think 1 layer straight & One. 180° ( + x from the fibres & the rowings " Carbon Layers... & with epoxid & thats the Thing! ... at the edge i have to made a carbonpowder- .. with epoxid & carbondust .. to get a perfeckt wing, that ripps not... ( looks like black silicone... what i can do better for get the 2 wing-sh. strong boundet? .. ( & clear i have to selfwinde my Brushless Motor. Man, what a Projekt.. Need so much Info befor i made nonsenc the 2 Time... na 300kmh pylonracer are great... but 300 & up to 500... thats allot & i hope kg dont ripps apart
Congrats for your build, it´s beautiful and you have a great tecnique, wich airfoil did you use ? im about to start to build one but don´t know wich is the right airfoil for a DLG 1.5 M of wing. Thanks
As I know nowadays many DLG use "synergy II" as the airfoil, some old DLG use "Zone V2". you can find it on RCgroups.
@@eraserma2212 thanks, allready found Zone V2 but ill ty with this other ones. Wich paint did you use on the mylars ? regards
@@magneresjuan Sorry. I didn't make painting on my plane. I don't have this skill. And I think it will add extra weight.
@@eraserma2212 yes it is not easy the paint thing. But those reds on the wing looks great ! it i no paint? Did you find very difficult to build a Synergy II on bagg? I found out very difficult to respect that 2° curve this wing needs, how did you do it?
The paint adds more than 3g.
However I prioritize the visibility from the distance.
Love the design of the wings! Are the templates and wing profile used on your website somewhere? I'd like to copy them :)
I found the Synergy II" airfoil at the rc groups ! thanks ! did you made your wing only in two parts?
さすがだな〜。。。
Which pump do you use ?
www.nitto-kohki.co.jp/prd/search/syousai?seihincd=LB08221&lang=ja&groupcd=L
Disappointed that this video is lacking in any information whatsoever. Even slowed down to the lowest speed possible, it was useless. This could have been one of the best videos on this subject. Why did you release the video like this?
I have no idea of what is going on! Nice build, but this doesn't give me a clue about what you are doing at all.
👍
Hi