Fox Body Mustang Heater Core Replacement Made Easy!!!
HTML-код
- Опубликовано: 28 июл 2024
- Bill shows you how to install a Heater Core in your 1979-1993 Foxbody Mustangs with Air Conditioning.
Purchase Product Here:
www.cjponyparts.com/heater-co...
This is a stock replacement heater core for all 1979-1993 Mustangs with air conditioning. This product will install in the factory location and is a correct replacement for your Mustang. Don’t suffer without heat in the winter, purchase this replacement heater core today!
Check out other Mustang parts from CJ's here:
www.cjponyparts.com/mustang-p...
Subscribe to CJ Pony Parts on RUclips here:
ruclips.net/user/subscription_c...
Music Provided By:
www.epidemicsound.com/
#CJPonyParts 
Авто/Мото
Purchase Product Here:
www.cjponyparts.com/heater-core-with-air-conditioning-1979-1993/p/HC8/
Gotta congratulate those engineers and designers for a job well done in making every mechanic and DYI lives a little more crap show,takes more time to dismantle than anything,,my old chevys were behind the glove box,,a toast to everyone who does this👍
Best Heater Core video I’ve seen. Great job with the detailed description.
Had to do this on my 89. I would rather bait an alligator with my manhood than to ever do that again.
Great video.
Thank you for making this video. It was extremely helpful. I got mine done in about 5 hours
I’m about to tackle mine, except I need to change my evap core. Thanks for the timeline estimate! I was wondering about how long it might take.
I did this job on my 1988 mustang gt back in 1993.I bought the car new in 1988. When I did this job by the manual I had , the car only had 24,000 miles on it. Anyway I took my time ,and it is done exactly the way you did it however , I took a couple afternoons in my spare time to reassemble everything. It came out so perfect ,it looked like I never touched the car. I will tell you for neither love nor money , I will never attempt that job again . My friend I worked with had a Ford Fairmont wagon with the same problem, and he stated the same thing. Never again. His job came out great also. When I found out how easy a non air conditioned fox body car was to change the core , I just about flipped .Great video. Been there ,done that , and never again. Stay safe....
i had a 1980 mustang and the heater core was behind the glove box below the evaporator core requiring it to be taken out after discharging the A/C and putting it back and re-charging the A/C afterwards
Great Video ....... I've Been Dreading This Replacement For Years. Almost Took It To A Mechanic To Replace. But Watching This Video I Believe I Will Save Me About $700+. I Will Start Project In A Couple Days.
I would also recommend a new flow restrictor in the heater core hose to prevent the heater core from getting to much pressure and prematurely failing.
I agree, I used a small socket 10 - 11mm I believe, works just the same. I think the restrictors were installed in the patrol cars also.
Words of wisdom right there,Probably the most important thing unless one wants to do this job all over again,lol, this system was not very well designed,even with the restrictor they still fail,romping on the car before the thermostat opens is really bad too for the ole heater core also,i think they should make a heater core thats a little more stoutly built but i have read this doesn't only happen to these cars,other makers too.
@@garysmith2501 that’s where all of the 10mm sockets are going to!
Fun to watch! Great installation video!
Wishing my car wasn’t a factory A/C car right about now lol
Probably the best instruction video I have ever watched good job. 😊
Awesome. Very detailed instructions and tips. Thanks. You guys made it look easy.
Clear and concise. Excellent!
Dig the custom wiper arm!
Good video
Manufacturers could so readily make the design easier to work on, but I swear I think they do this on purpose to torture us.
Ford
Still better than working on a chevy
When you say I can just pull the AC bracket off the studs I considered it a capital offense
Are you saying on my 87 2.3L non air I don't have to pull the whole dash apart to change this out?
I dropped the glove box to take a look. You would have to do a video on that to show us because I don't see anyway possible to get that airbox open to get the core out.
I used olive oil for the reinstallation of the hoses
That's a good idea, be very careful with them the core is so freaking fragile.
People make a Fox heater core job out to be much worse than it is. It’s a couple hour job, at the most.
If you know what you are doing but it is intimidating for many.
Anybody know where the heater core for a Mustang GT 4.6 2007 would be located I keep trying to find answers on the internet but nothing specific? I’m assuming I’m still going to have to remove the dash? Maybe? Anything helps!
How much would this job cost? I have a 1987 Ford Mclaren 5.0
Hello, why do none of you take the extra step to show up how to replace the AC evaporator? Would love to see a video of you guys doing it. Thanks
do you have a separate video on how to remove and install the hoses to the heater core?
You loosen clamps,pull hoses,put new hoses with clamps and your done,not really worth a video, common sense.
What would you rather do, headers on a coyote or a fox heater core?
fox heater core
I cut a hole in the fire wall and made a spring loaded flap in my 85 GT to replace mine. 😂
I have to do the same thing to my car can you do it for me
can a heater core be installed on a car that originally does not have one? i do know how to mount and do the plumbing.
my question is will my water pump get damaged because it will now push water through the radiator and heater core. thank u in advance
water pump is designed to pump through both
@@ufartface thank u. I got my project car postponed because it was involved in an accident. Luckily i came out with no injury. But the mh project car got badly damaged :(
Did you have to disconnect the speedometer cable in order to pull the dash that far out?
benny coniglio that car has a GPS Speedo but I have been able to get the dash far enough out of the way on several cars with the speedo attached, only had one I had to disconnect because it had zero play
You really just have to do the right side to get where you need....
Factory non air car here.....dropped the glove box and can't access nearer core as you said....
Same. Don't see how it's possible.
This is the way this should have been designed for the A/C cars. Simple... ruclips.net/video/566sgluksr0/видео.html
Wish it only took 14 mins!
35 years and 150k. No leaks
After watching this video, the engineer(s) that designed this should’ve been mandated to install one themselves before it left the prototype floor. There’s gotta be a better way to design this. Ridiculous. 🙄
Lot of cars are like this, not just these Mustangs,Ive done several different cars and its about the same but yes, you are right,they should do several not just one so they can experience the pain firsthand,they should have positioned it vertically with a trapdoor on the bottom of sorts,im sure it could be done, kinda like cabin filters.
i just cut a hole in the dash- no big deal for a 20 year old car then pieced it together
@@dntlss They could have had a plate on the fire wall just take it out there lol...