Hi, I have a problem with my iron, sometimes water is driping from the iron plate, when this is happening temperature of the iron plate is lower than 100°C, it is about 80°C. This is cause of the water driping, because water is condensing on the iron plate, so maybe you know why sometimes the iron plate is not heated, and the temperature drop causing water condensing, and because od that watet driping? Thank for you help.
@@ztechs3but the problem ocure only sometimes, sometimes the iron is working 1h without any problems, and then it happens for fiew seconds, when the iron get back to the temperature around 140°C, it is back to normal.
The Philips GC9650/80 steam generator stops generating steam, but when it is unplugged and left for 20 minutes, it works normally again, although the pump may be a bit loud. What could be the cause?
but still it doesn't prove that the pump is ok, sometimes the pump works but cant transfer water into the boiler, hows the temperature of iron and any red light signal?
Bravo master 😅😅😅😅
Thanks bro
It is realy admiral, excellent job 👏 👍
Thanks alot! huge Appreciation from here ☺️
Hi, I have a problem with my iron, sometimes water is driping from the iron plate, when this is happening temperature of the iron plate is lower than 100°C, it is about 80°C. This is cause of the water driping, because water is condensing on the iron plate, so maybe you know why sometimes the iron plate is not heated, and the temperature drop causing water condensing, and because od that watet driping? Thank for you help.
The main circuit needs to be replaced, your iron is not having an accurate temperature to be steamed that's why water is dipping out of iron
@@ztechs3but the problem ocure only sometimes, sometimes the iron is working 1h without any problems, and then it happens for fiew seconds, when the iron get back to the temperature around 140°C, it is back to normal.
What to do if the steamer spoilt ??
will you please tell me more about your steamer, what exactly is the problem?
@@ztechs3 when I switch on the iron, the sound very loud, and there is no steam come out after awhile
okay it seems the water pump is damaged but if you can send me any video it will be more helpful to find problem
Sorry don’t know how to upload the video here 😅
@wilminang765 contact me on my whatsap chck descriptions of my other video
The Philips GC9650/80 steam generator stops generating steam, but when it is unplugged and left for 20 minutes, it works normally again, although the pump may be a bit loud. What could be the cause?
when it stops generating steam does the pump work?
@@ztechs3 yes, it does
but still it doesn't prove that the pump is ok, sometimes the pump works but cant transfer water into the boiler, hows the temperature of iron and any red light signal?
The pump turns on often, it is strange.@@ztechs3
The temperature is normal high, no red signals.
Please show how to restore philips 2800 series steam iron
if i will do i will post!
👏👏👏👏🙏🙏🙏🙏😊
🙏🙏🥰🥰
Where is your repair center at?
Pakistan Karachi Bro
Super
So nice
Kiya baat hai
thanks