How to fix clogged sunroof drain for free (wet floorboards problem) in any Nissan sedan or coupe

Поделиться
HTML-код
  • Опубликовано: 19 янв 2022
  • this works for Nissan ultima 3.5, Nissan ultima coupe, Nissan Maxima, Nissan Versa, a modified Nissan 350z with sunroof and basically any other Nissan sedan or coupe. Hope this helped

Комментарии • 14

  • @nwhetz1
    @nwhetz1 Год назад +7

    Wowwwwwww this is 10000 times easier than all the other video suggestions. They all say to take your entire panels off, buy a pump, etc…. This is genius and wayyy easier. Thanks for posting!

  • @Travel-Trails
    @Travel-Trails Месяц назад

    Thanks for this video I tried clearing the blockage with a wire, however, I guess i dislodged a seal somewhere and now the water is leaking from the pillar. I have no way to find out where this seal is and how to access it. I would suggest people to be very gentle when using the wire method to clear it. In my opinion, the other option to access and remove the filter under the wiper trims would be more safer.

  • @natajaj5235
    @natajaj5235 Год назад

    Omg this helped so much

  • @jdmchickkustomz9417
    @jdmchickkustomz9417 5 месяцев назад

    Very helpful thank you

  • @mctapout187
    @mctapout187 2 месяца назад +1

    I just bought a siphon hand pump from amazon, filled up a bucket of water then disconnected drained tube thats connected to plug in firewall. Connect the outlet side of siphon to the firewall plug, then put hose from inlet side of siphon into bucket of water. Then just pump away till water comes out from outside of vehicle. I did all 4 corners for the low low price of 19.99 hahahahhaha

  • @harveypowell617
    @harveypowell617 Год назад

    Where’s the drain located?

  • @scarcorleon
    @scarcorleon 2 года назад +2

    I know this is a old video but do you have the link or info on the wire you used?

    • @jillysponges
      @jillysponges 9 месяцев назад +2

      Weed Wacker wire

    • @scarcorleon
      @scarcorleon 9 месяцев назад

      @@jillysponges it didn’t work

    • @Tngoz
      @Tngoz 6 месяцев назад +1

      I'm going to try it today... 2008 Altima . Passenger side

    • @GhettoArabSage
      @GhettoArabSage 6 месяцев назад +1

      ​@Tngoz you should. I just did this to my 2014 altima but using a length of 3d printer filament. It worked.

    • @Tngoz
      @Tngoz 6 месяцев назад

      @@GhettoArabSage didn't unclog it... going to have to remove the glove box and punch out the filter part with a screw driver

  • @peacehappyb237
    @peacehappyb237 2 месяца назад

    OMG such a pain. I got an air blower takes some time for me.

  • @harryballz6358
    @harryballz6358 3 месяца назад

    I just use my air compressors nozzle to blow my line's out. Blast about 3 seconds on each hole, done..lol
    This is how most cars sunroofs are made not just Nissan fwiw.