this is the Best video ever showing great techniques around overhead console where heights are way different and so tedious. His techniques are the only way and Great! Wish it was slower through that area process
I tried this with my mkv gti headliner and failed miserably 😂😂😂 I’m taking it to an upholstery guy this is not my kinda work. You did an impressive job!
What was the hardest part of it? Ive been quoted £600 for mine which I'm not really prepared to pay so gonna give it a go myself. Any help appreciated!
It is not necessary to glue the canvas with foam, but since that is the case in the original, I used that canvas. Some ordinary canvas can also be glued, but the foam gives it a nicer final look. And it must be cleaned all the way to the shell, otherwise the glue will not be able to stick the new material. Good luck with the works. Greeting.
Pozdrav. Ako biste mi mogli odgovoriti na sljedece pitanje. Imam istog golfa, međutim kod mene je platno samo prljavo (prethodni vlasnik je pušio u autu, pa požutilo malo). Da li ima neka tečnost sa čime bih mogao oprati to bez da skidam sve? Koliko će to oštetiti samu podlugu? Hvala unaprijed.
Pozdrav. Svako čišćenje krovnog tapacirunga na kraju vodi ka odljepljivanju istog. Mnogi se pitaju zašto?! Zato što ispod platna, odnosno mrežice krovnog tapacirunga ima sloj spužve koja mu daje mekani, luksuzniji izgled, kada je sve novo. Vremenom ta ista spužvica propadne, izgori, izgubi svoju formu.. Korištenjem sredstava za čišćenje koji su ugl. hemijska baza tu spužvicu dodatno ošteti, a i samo trljanje krpom ili spužvom razdvaja platno od spužvice i u nekim slučajevima se odlijepi odmah a u nekim za neki određeni period. Dubinsko pranje će pogotovo oštetiti spužvicu i sve će se odlijepiti. Nadam se da ste dobili željeni odgovor. Pozdrav
I do not disconnect the battery because there is no possibility to activate the airbags during disassembly. You can disconnect it if that makes you more comfortable. Greetings
It is a canvas with a sponge behind it. Over time, that sponge burns and decays, and that's why the canvas hangs. To be able to glue anything, you have to clean the old sponge from the shell, and the canvas that is left is so thin that any glue you use will melt and be ugly. It is best to use a new canvas with a sponge. Good luck and thank you.
@@El_Pertita I think it's enough, just be careful with the application of the glue. Apply evenly and thinly and make sure that there is not too much glue in some places, which will eventually leak through the canvas.
Hello, I see you used dedicated dunlop headliner glue, was that used for both the paint brush application and the air gun? That's the only adhesive used for everything right? Did you just use the air brush to save time? Can I just manually brush all parts? Awesome video, thank you!
Thanks for the comment. Yes that is the glue that was used. It can also be applied with a brush, and I use an air gun for larger areas because it goes faster that way. Greetings.
I wasn't able to find that glue you're using, but I bought some weldwood contact cement to brush on, do you think that would be okay to use?@@VDEdition1
Odličan posao radiš. Radiš jako oprezno, savjesno. Jedan savjet, kada radiš oko plafonjere, uzmi industrijski fen inzagrij jako odozdo i laganije odozgo tj. materijal onda pritisni i istrljaj. Neces morati stavljati peškire, posude i utege.. Svidja mi se taj trokut sto zalijepis kada radiš oko plafonjere 17:25. To nisam radio, a sutra cu probati. I kakvo je to ljepilo?
Als ik alles verwijderd hebt blijft het altijd nog iets of wat plakken Moet ik dat ook weg schrobben Of maakt dat kleverige niet uit Hij is verder wel netjes schoon
Hello very good video. I will have the same journey ahead 😂 I am from Germany and I can’t find the Dunlop lp adhesive anywhere. Do you have an option where to get it?
Thanks a lot. I don't know how to get Dulnop glue in Germany. Try to find this product, it should be available in Germany.. "3M Headliner & Fabric Adhesive" great option also comes in a spray. Two sprays can be to finish the headliner. Good luck with the works.
I get the materials from a local supplier of equipment for the auto industry and this is a material intended for headliners with 2-3mm sponge behind. You have the same ones on Ebay.."headliner fabric with foam". Good luck with the works.
Meni uradili nebo i kad je mračno vide se 2 linije na sredini poprijeko, a kad je na svjetlosti sve izgleda ravno, znaš li šta može dovesti do toga, u čemu je fora? Pozdrav
Pozdrav. Tokom ljepljenja su prevraćali materijal da nanesu ljepilo i na tim mjestima se spužvica "slomila" i ostali su kanali. Tu ne možeš ništa uraditi. Najbolje je ne dirati ništa. Pozz
@@VDEdition1 Dobro sam im platio da mi odrade profesionalno, bez ikakvih vidljivih linija i bilo cega. Da li to mogu smatrati nekom njihovom greškom ili se ti tragovi smatraju nebitnim iako su vidljivi? Koliko je teško odraditi a da se ništa ne vidi? Hvala na odgovoru
This is a problem with all cars that use the same type of material, headliner material with sponge. After some time, the sponge burns and then the canvas starts to separate from it. I did repairs on Peugeot, Renault, Citroen, BMW, Mercedes, Lancia, Opel, Škoda, Seat, Volvo, Alfa Romeo, Toyota, Land Rover, Audi, VW, etc. My channel has videos from almost all of these brands listed.
@@VDEdition1 I repaired my Jetta by removing the headliner plastic completely leaving the carton base celan, then I painted all the carton with vinilic paint exactly with the same light gray color.
Pozdrav kakav ti je to nastavak na busilici i gde ima da se kupi ? I da li moze da se nanese lepak cetkom na celo nebo tvoje neko misljenje i iskustvo hvala !
Pozdrav. Nastavak za bušilicu imaš kupiti u svim većim prodavnicama koje prodaju alat. Što se tiče nanošenja ljepila četkom može i tako samo da ideš na što kraće etape jer ako ljepilo brzo suši onda moraš tako. Namažeš traku širine 10cm pa zalijepiš štof i sve tako dok ne dođeš do kraja. I nanosiš tanak sloj da nebi protopilo ljepilo kroz štof. Sretno
If you haven't done this before, it will take a few days to get everything back to how it was. I manage to finish everything in one day. Good luck with the works.
Ovako sam 100% siguran da se neće odlijepiti i do sada nije bilo nikakvih reklamacija. Prihvatam svaku kritiku, a i savjet je uvijek dobro došao. Ne mogu da nađem opciju da te direktno kontaktiram pa ću ti ostaviti svoj broj pa se možemo čuti preko viber-a ili WhatsApp-a 00387 61 323 351.
Danke für den Kommentar. Mir war nicht einmal bewusst, dass einige Teile des Tons entfernt wurden, wahrscheinlich aus Urheberrechtsgründen. Ich werde das beheben. Danke noch einmal.
This is honestly the best one I have seen by far👌
Thank you very much.
ruclips.net/video/-7Z9d8KJVBM/видео.html That one is even better
Your approach for this job is actually great !
Thanks for the comment.
this is the Best video ever showing great techniques around overhead console where
heights are way different and so tedious. His techniques are the only way and Great!
Wish it was slower through that area process
Thanks a lot. I'm glad the video will be helpful to someone. You can slow down the video in the video playback options. Greetings
I tried this with my mkv gti headliner and failed miserably 😂😂😂 I’m taking it to an upholstery guy this is not my kinda work. You did an impressive job!
What was the hardest part of it? Ive been quoted £600 for mine which I'm not really prepared to pay so gonna give it a go myself. Any help appreciated!
@@Sam-np4ochow’s it going?
haha ended up finding someone to do it much cheaper so went with them. @@EastDallasKicks
Thank you for your comment.
I have done a few headlines over the years. First and foremost DON’T skimp on adhesive. Stay away from spray can adhesive. They don’t last.
Dude, this video will have helped so many people and it'll definately help me. Nice one, all the best.
I'm glad the video was helpful. Thanks for the comment.
It looks so easy when you do it. thanks for the educational content!! 💪
Thank you. I'm glad the video was helpful.
great video very professional Im playing it safe with 3M non woven pads instead of the drill and brush attachment
I'm glad the video was helpful.
You are the master! Thank you!
Thanks for the comment.
very very good...thank you
Thanks for the comment.
Is foam pad required under new liner? Looks like large amounts of thick adhesive was removed. Thanks for posting.
It is not necessary to glue the canvas with foam, but since that is the case in the original, I used that canvas. Some ordinary canvas can also be glued, but the foam gives it a nicer final look. And it must be cleaned all the way to the shell, otherwise the glue will not be able to stick the new material. Good luck with the works. Greeting.
Hi, please can u tell me what kind of adhesive did u use on the edges, I mean that one from can u used to with brush, thanx
I used Dunlop GP, although you can use any glue for the edges as long as it is heat resistant.
Great work!
Thank you. I'm glad if the video was helpful.
What is the size of the fabric you used if you remember? I know it is 3mm but the dimensions of it. Thanks
You need 2 meters in length and a minimum width of 140 cm.
Very well done!
What did you use to take the old glue off the headliner?
Steel brush and sandpaper
Hi is the headliner shown in this video out of a mk6 golf? Just curious as it doesn’t have the cut out for an interior monitoring sensor
The headliner in this video is the original headliner from this vehicle, the golf mk5.
@@VDEdition1 okay thank you
@@VDEdition1 do you know if a mk6 headliner would fit?
Sir, what kind of adhesive you use? The adhesive for the pistol compressor i speak ok? Thank you
I used Dunlop GP glue.
@@VDEdition1 Thank you sir.Regards
Very very nice!
Thx! 👍
Hi, what kind of material are you using for the headliner? Is it the one with the foam on the back?
Yes, i used a fabric with 3mm foam.
Awesome work
thank you
Pozdrav. Ako biste mi mogli odgovoriti na sljedece pitanje.
Imam istog golfa, međutim kod mene je platno samo prljavo (prethodni vlasnik je pušio u autu, pa požutilo malo).
Da li ima neka tečnost sa čime bih mogao oprati to bez da skidam sve? Koliko će to oštetiti samu podlugu?
Hvala unaprijed.
Pozdrav.
Svako čišćenje krovnog tapacirunga na kraju vodi ka odljepljivanju istog.
Mnogi se pitaju zašto?! Zato što ispod platna, odnosno mrežice krovnog tapacirunga ima sloj spužve koja mu daje mekani, luksuzniji izgled, kada je sve novo.
Vremenom ta ista spužvica propadne, izgori, izgubi svoju formu..
Korištenjem sredstava za čišćenje koji su ugl. hemijska baza tu spužvicu dodatno ošteti, a i samo trljanje krpom ili spužvom razdvaja platno od spužvice i u nekim slučajevima se odlijepi odmah a u nekim za neki određeni period. Dubinsko pranje će pogotovo oštetiti spužvicu i sve će se odlijepiti.
Nadam se da ste dobili željeni odgovor. Pozdrav
Do you disconnect the battery before doing this? I am scared of popping airbags.
I do not disconnect the battery because there is no possibility to activate the airbags during disassembly. You can disconnect it if that makes you more comfortable. Greetings
Can i use the old fabric or do i have to replace it ? Amazing video btw.
It is a canvas with a sponge behind it. Over time, that sponge burns and decays, and that's why the canvas hangs. To be able to glue anything, you have to clean the old sponge from the shell, and the canvas that is left is so thin that any glue you use will melt and be ugly. It is best to use a new canvas with a sponge. Good luck and thank you.
@@VDEdition1 thanks for the quick response
@@VDEdition1 one more question plz. I bought a fabric with 0,1cm thickness is it enough ? Thanks
@@El_Pertita I think it's enough, just be careful with the application of the glue. Apply evenly and thinly and make sure that there is not too much glue in some places, which will eventually leak through the canvas.
@@VDEdition1 thank you so much man
Hello, I see you used dedicated dunlop headliner glue, was that used for both the paint brush application and the air gun? That's the only adhesive used for everything right? Did you just use the air brush to save time? Can I just manually brush all parts? Awesome video, thank you!
Thanks for the comment. Yes that is the glue that was used. It can also be applied with a brush, and I use an air gun for larger areas because it goes faster that way. Greetings.
I got contact cement because I couldn't find the glue you used anywhere, you think that would hold up fine?
Awesome thank you so much!@@VDEdition1
I wasn't able to find that glue you're using, but I bought some weldwood contact cement to brush on, do you think that would be okay to use?@@VDEdition1
the best.
Thanks a lot.
Koju diznu koristiš za nanošenje lepka i koji pritisak ti je potreban za špricu?
Svaka čast.
Hvala. Kompresor koji koristim puni do 8 bara, a za diznu nisam siguran, morat ću provjeriti.
Odličan posao radiš. Radiš jako oprezno, savjesno.
Jedan savjet, kada radiš oko plafonjere, uzmi industrijski fen inzagrij jako odozdo i laganije odozgo tj. materijal onda pritisni i istrljaj. Neces morati stavljati peškire, posude i utege..
Svidja mi se taj trokut sto zalijepis kada radiš oko plafonjere 17:25. To nisam radio, a sutra cu probati.
I kakvo je to ljepilo?
Hvala na savjetu.
Thanks homie🫡🙏🏼
What kind of glue? And do you suggest mainly working from the inside out?
Glue is Dunlop LP. You do everything as in the video and it's the correct procedure.
Bro does mk6 headliner fit into mk5 with all A, B, C pillar trim
No, it doesn't fit. Although at first everything looks similar, believe me it's not.
do i need to aplly the adhesive only on the headliner or is it required to aplly also on the textile material ?
I apply glue on both sides, it's much better and safer.
Amazing work, what kind of glue are you using ?
Thanks. I used a dedicated dunlop headliner glue, resistant to high temperatures.
Als ik alles verwijderd hebt blijft het altijd nog iets of wat plakken
Moet ik dat ook weg schrobben
Of maakt dat kleverige niet uit
Hij is verder wel netjes schoon
Everything must be cleaned. If it cannot be scraped off then it is best to use nitro thinner to wash off the old glue.
Hello very good video. I will have the same journey ahead 😂 I am from Germany and I can’t find the Dunlop lp adhesive anywhere. Do you have an option where to get it?
Thanks a lot. I don't know how to get Dulnop glue in Germany. Try to find this product, it should be available in Germany.. "3M Headliner & Fabric Adhesive" great option also comes in a spray. Two sprays can be to finish the headliner. Good luck with the works.
Hi, do you blow hot or cold air on it ? Thanks
Hot air.
Imaš li link od ljepila?
Dunlop LP
@@VDEdition1gde ga mozes kupiti...
Dali bi bio pattex universal classic dobar ili ne za taj posal...
Lovely job! How much will it cost to do mine as well?
Thank you. I think you'll have to find someone near you to do it. :D
what material did you use and where did you buy it? thx
I get the materials from a local supplier of equipment for the auto industry and this is a material intended for headliners with 2-3mm sponge behind. You have the same ones on Ebay.."headliner fabric with foam". Good luck with the works.
Hi, what type of glue that you put in air sprayer?
Dunlop adhesive
Meni uradili nebo i kad je mračno vide se 2 linije na sredini poprijeko, a kad je na svjetlosti sve izgleda ravno, znaš li šta može dovesti do toga, u čemu je fora? Pozdrav
Pozdrav. Tokom ljepljenja su prevraćali materijal da nanesu ljepilo i na tim mjestima se spužvica "slomila" i ostali su kanali. Tu ne možeš ništa uraditi. Najbolje je ne dirati ništa. Pozz
@@VDEdition1 Dobro sam im platio da mi odrade profesionalno, bez ikakvih vidljivih linija i bilo cega. Da li to mogu smatrati nekom njihovom greškom ili se ti tragovi smatraju nebitnim iako su vidljivi? Koliko je teško odraditi a da se ništa ne vidi? Hvala na odgovoru
Whats the adhesive product you used?
Dunlop LP
All Golfs, Jettas and Passats have the same defect. The headliner falling down. What does the VW factory say?
This is a problem with all cars that use the same type of material, headliner material with sponge. After some time, the sponge burns and then the canvas starts to separate from it. I did repairs on Peugeot, Renault, Citroen, BMW, Mercedes, Lancia, Opel, Škoda, Seat, Volvo, Alfa Romeo, Toyota, Land Rover, Audi, VW, etc. My channel has videos from almost all of these brands listed.
@@VDEdition1 I repaired my Jetta by removing the headliner plastic completely leaving the carton base celan, then I painted all the carton with vinilic paint exactly with the same light gray color.
What’s the actual colour of the headliner? I want to buy it but not sure.
This is an original VW fabric. I don't know the exact name of the shade.
Ok Txs. I ended up buying a piece but it was slightly off.
Pozdrav kakav ti je to nastavak na busilici i gde ima da se kupi ? I da li moze da se nanese lepak cetkom na celo nebo tvoje neko misljenje i iskustvo hvala !
Pozdrav. Nastavak za bušilicu imaš kupiti u svim većim prodavnicama koje prodaju alat. Što se tiče nanošenja ljepila četkom može i tako samo da ideš na što kraće etape jer ako ljepilo brzo suši onda moraš tako. Namažeš traku širine 10cm pa zalijepiš štof i sve tako dok ne dođeš do kraja. I nanosiš tanak sloj da nebi protopilo ljepilo kroz štof. Sretno
@@VDEdition1 Hvala ! :)
Please what type of glue
Dunlop LP
did you disconnect the battery?
No need to disconnect the battery.
bonjour tu la acheter ou ton tissu ??
I buy a new fabric with a sponge and install it.
If I do this, I need 1 week for this shit 😂👌🏼 who can do this on my golf 5??😂
If you haven't done this before, it will take a few days to get everything back to how it was. I manage to finish everything in one day. Good luck with the works.
I opened it and couldn't get it back
How is that possible?!
koj lepak koristis
Dunlop adhesive
Nemam nista protiv .. ali ti se brate mucis ..pisi mi u privatnu poraku da ti kazem neke dobronamerne savjete da sredis to za 2 3 sata .
Ovako sam 100% siguran da se neće odlijepiti i do sada nije bilo nikakvih reklamacija. Prihvatam svaku kritiku, a i savjet je uvijek dobro došao. Ne mogu da nađem opciju da te direktno kontaktiram pa ću ti ostaviti svoj broj pa se možemo čuti preko viber-a ili WhatsApp-a 00387 61 323 351.
Gutes video aber der sound bzw mal da mal weg nervt
Danke für den Kommentar. Mir war nicht einmal bewusst, dass einige Teile des Tons entfernt wurden, wahrscheinlich aus Urheberrechtsgründen. Ich werde das beheben. Danke noch einmal.
Kurwa jak zdjąć ta listwę z szyberdachu
Jaki zespół konkretnie masz na myśli?
La musica stressante che hai messo rompe proprio le scatole e sminuisce il tuo bellissino lavoro
Thank you, I will work on it in the future..