Shocked that you haven’t got a million subscribes yet. People are blind your work is simply the best of seen. Honestly I’m shocked at how good you are.
With a proper expert at recording and editing this could get very popular for sure as the information is there. However it is only about building Garden offices which is a niche market. If he had other videos on woodworking and specific how to videos he could grab a larger audience.
I've just finished my garden room which I could only do thanks to your videos, so thank you. I was super happy with it but unfortunately now I've seen those strip lights... the whole lot needs tearing down and starting again 😭
Lol, I watched the previous video and was hoping you'd post a more detailed planning for the lighting. We're now looking in to it for our own living room because it's such a nice clean look. Will make it continues but adjustable in sections as well. Great idea!
We supply channel, drivers and the LED strip www.ultraleds.co.uk/led-profiles.html#?Category0=LED+Profiles&search_return=all&Category1=Plaster-In+LED+Profiles
Hi, Is it best to vapour barrier before the OSB, if used on internal walls before boarding?? I’m building a warm roof annex… and wanted to do 11mm OSB externally, 50mmpir, 50mm soundslab - vapour barrier, then 11mm OSB then 12.5Pb for the walls Any guidance would be appreciated
What did you do for the corners of the led strip? Did you power it from 1 end or multiple ends? Did you use the corner connectors for the LED strip or just a short wire?
Powered two separate tapes from one corner and went in opposite directions, it kinda bends round the corner in such a way you can’t tell when the diffuser is fit
It was over the osb although as per a previous inspection report its redundant with the way he builds his rooms. He still uses it for peace of mind however.
Oh Bo//(#$, the mrs has just seen this and now wants them all over the bloody house 🙄 Cheers Liam 👍🏼 🤣 I'm pretending i don't care but i love them too 😉 Take care A team.
Perfect fit Perfect finishing Perfect job guys. May Allah protect both of you.
Shocked that you haven’t got a million subscribes yet. People are blind your work is simply the best of seen. Honestly I’m shocked at how good you are.
😌
With a proper expert at recording and editing this could get very popular for sure as the information is there. However it is only about building Garden offices which is a niche market. If he had other videos on woodworking and specific how to videos he could grab a larger audience.
@@kylekeenan3485 absolutely spot on mate 👍🏼
Another amazing detailed job!!
Well done Liam and team
Wow a very detailed instructional video
Absolutely seamless, great work guys really nice to see and the fact you actually take pride in what you’re doing 👍🏼
I've just finished my garden room which I could only do thanks to your videos, so thank you.
I was super happy with it but unfortunately now I've seen those strip lights... the whole lot needs tearing down and starting again 😭
Lol, I watched the previous video and was hoping you'd post a more detailed planning for the lighting. We're now looking in to it for our own living room because it's such a nice clean look. Will make it continues but adjustable in sections as well. Great idea!
Outstanding that! Very professional & looks brilliant 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
great idea with that OSB on the ceiling
Where did you source the aluminium channels and strip lights with wall mounted controller from? Thanks in advance
We supply channel, drivers and the LED strip www.ultraleds.co.uk/led-profiles.html#?Category0=LED+Profiles&search_return=all&Category1=Plaster-In+LED+Profiles
I’d like to know this as well I plan on using them for my media wall I created
@@MrLegend139 i think they are the same ones one LEDSpace. I have just ordered mine too
I buy the saxby brand plaster in profile
Love them lights another addition to your ability.... 😁😁😁
Hi this is awesome can I ask what the brand name for the led strips are and was the a transformer for this located above ceiling
Any information on the products used for the strip lights? thanks
Came out really nice shag, customer must be happy 👍🏻
Look absolutely fantastic good job well done 👏
Any chance you can listed items for this led light system please? Thx
Awesome job looks really smart👍
Can you list where to get the light controllers and the smart switches?
Can`t believe I get to comment first lol... Woo Hoo Beautiful Work once again My Friends
Loved the vid, U can talk for England 🤣🤣👍
Do you have a link for the flush mounted channels that were used?
What LED lights did you use?
hi what brand led strips are these? and controller looks great
Hi pal great job. I was wondering if you can tell how did you cover the led profile for skimming
? Thank you
Hi, Where did you buy those profiles for concrete wall installation . Please post a link
What's the LED track makes please?
Where do you put the controllers and drivers? Just inside the wall?
beautiful, and thanks for the recap.👍
Were did you get the ligth
Very nice lighting
Hi,
Is it best to vapour barrier before the OSB, if used on internal walls before boarding??
I’m building a warm roof annex…
and wanted to do 11mm OSB externally, 50mmpir, 50mm soundslab - vapour barrier, then 11mm OSB then 12.5Pb for the walls
Any guidance would be appreciated
Is there a link to where to get them from?
Because they look great
Thanks
the client supplied these, we will definitely be fitting them in the future. ill post a link soon as I get it mate
Thanks for asking this question, and thanks for the positive response Liam:-)
www.downlightsdirect.co.uk/96-led-per-metre-rgbww-led-tape.html
Thanks you most excellent bloke :-)
Did you have to put another board on top of the profile edges again? How did you hide the aluminum?
I wish there was a builder like you near me ..I seem to find all dodgy builders in Birmingham
Top quality job guys
where did you get the lights from and are they easy to replce if need be
customer supplied, but yes, easy to replace, just take off diffuser cover pull tape light out, and reinstall new tape light
Can I ask what underfloor heating product and thermostat was used in this build?
Where is the control panel from?
did you show how you installed the underfloor heating?
Unfortunately not, will do in the next mate,
@@thegardenroomguru look forward to it! your videos have helped me alot with building my workshop! keep up the amazing work!
Brilliant job guys where can you source the strip lights ? Does the track and lights come as a single package ?
best bet for led strips is aliexpress, but the aluminum profiles better get locally, you won't pay through the nose for shipping
Enjoyed your video
Awesome video
Another great video. Many thank. Could I please ask where you bought LED Plaster in profile tracks from?
That turned out awesome and no disrespect but Jenny😍😍😍
What did you do for the corners of the led strip? Did you power it from 1 end or multiple ends? Did you use the corner connectors for the LED strip or just a short wire?
Powered two separate tapes from one corner and went in opposite directions, it kinda bends round the corner in such a way you can’t tell when the diffuser is fit
@@thegardenroomguru thanks! So I imagine you twisted the led strip and pushed it up into the ceiling so it doesn't alter the light output? Thanks
There’s a hole cut in the track at the end of the tape, any excess is just pushed into the ceiling void
Are this lights adequate to light up whole room without extra light?
they are more lumens than the spots we would of fit, so yes mate.
@@thegardenroomguru Thank you very much for quick answer.
Did you still add a vapour barrier to the ceiling over or under the osb?
Whats the max length per led strip light, 5m or 10m?
It was over the osb although as per a previous inspection report its redundant with the way he builds his rooms. He still uses it for peace of mind however.
Great work! 👍🏽 where’s the transformer hidden/located?
Can I use a router to make the channel to install the LED tracks?
Dangerous and messy up side down mate
Nice idea
Expertly done!
Grand job...
Did you screw the led track to the wall and the ceiling or staple it?
Screwed mate, it’s in a video, OSB’d the wall and ceiling 1st
Why is that TV mounted so high?
What’s the make of the LED lighting?
Quality job
Is the plasterboard fixed to the osb rather than the roof timebrs?
Yes it is.
Great job that 👌🏻
Did you OSB the ceiling?, not sure if you said. 😂
O S B Everything 🤣
Oh Bo//(#$, the mrs has just seen this and now wants them all over the bloody house 🙄
Cheers Liam 👍🏼 🤣
I'm pretending i don't care but i love them too 😉
Take care A team.
Another good video.
Looks boss that. Top job
Instead of the Packers, could you not attach the track to the boot of board you're lifting up?!
Love it
HOW ABOUT A WINDOW IN THE ROOF... ????? LOVE 💘 THE VIDEOS
Hopefully mate, they bring you over the 2.5 though
👍🏻
Jenny’s alright looking
They look the dogs danglies Liam
The subtitles feature on youtube has never been more useful
Couldn’t understand half of what was uttered
Oh well 🤷♂️
Guy sounds like he got marbles in his mouth
I can't understand a damn word you are saying...
You just cut into your vapour barrier which personally is not needed you don't build houses like this it's a loud of bollocks
its not a house🤷🏻♂️