Just a quick note for those watching this, PattyAnne didn't press enter when she entered the bottom of the tumblers dimension. Just verify your dimensions before printing. :) Thanks for the great content PattyAnne!!
Thank you especially for the math intro It was right on time I also love the cups they are beautiful Great video keep up the good work hope you have more on sublimation .
This is my first time watching one of your videos and LOVE it. Thank you. Just a quick question, can you save that as a JPG or PNG so I can add it to another design? I don't have Silhouette, I only have Cricut but would be willing to purchase the business edition of Silhouette if I can save the conical warp photos to be used later.
Another great video. I really enjoy your video's you make everything seem so easy. And your my enabler guru. LOL I've been holding off on sublimation but you talk me into it. I ordered an Epson ET 4700 printer from Target for $139.99 on sale. I can't wait until it gets here next week. The mug heat press also comes next week. I ordered mugs & they are here waiting for the printer. LOL Where did you get the tumblers from? I've been .\a subscriber to Creative Fabrica for a while. Love that site too. Thanks again for the great videos I'm learning alot about my Silhouette Cameo 3
Hi Star! I am soooo super excited to say that I have a new affiliate link that will save you 15% if you use my code. (FYI this is where I bought my tumblers before I was able to get the discount!!!) They really work well and are ready to sublimate right out of the box! They are from jpplus.com and my code is 9PLP84 to save 15% !!
@@PattyAnnesPlace a full page image. There would be a background image with another image and it would be duplicated so it prints on both sides of tumbler. So you use an entire sheet of paper. Wish I knew how to attach a photo to show you.
@@PattyAnnesPlace I would also like to know! She means if you're filling the entire cup. So for example you want the entire cup to be blue with a design on it.
Hey PattiAnne... I hate to ask, but where did you order the tumbler from? I check your list on Amazon, didn't see it. Is it already coated for sublimation?
Hi Joni!! I am soooo super excited to say that I have a new affiliate link that will save you 15% if you use my code. (FYI this is where I bought my tumblers before I was able to get the discount!!!) They really work well and are ready to sublimate right out of the box! They are from jpplus.com and my code is 9PLP84 to save 15% !!
I guess the easiest way would be to figure out the dimensions that you need for one and then always use the exact same brand of mug/tumbler and the exact same dimensions. That way you won't have to figure it out each time.
Hi. I purchased Silhouette Studio Business Edition mainly for this feature. Every time I try to use the conical warp it goes into processing mode and won't work. I was planning on making Christmas tumblers but I can't now that it won't work. I emailed Silhouette America and haven't received a response. This is my last ditch effort, do you have any suggestions? Thank you, stay safe.
I'm having the same problem. Did you ever get it to work... I've closed the stupid program and the processing bar is still sitting in the middle of my screen, ugh
I absolutely love that you gave the math lesson with this! ❤
Just a quick note for those watching this, PattyAnne didn't press enter when she entered the bottom of the tumblers dimension. Just verify your dimensions before printing. :) Thanks for the great content PattyAnne!!
Thank you especially for the math intro It was right on time I also love the cups they are beautiful Great video keep up the good work hope you have more on sublimation .
You are so welcome
Thanks PattyAnne for another great video and math lesson refresher 😉
The math lesson was a bit scary! Thanks for your sweet comment, Spunky!
Thank you so much 😊
You're welcome 😊
Thanks for showing this.
You bet!! My pleasure!
Good video thanks
This is my first time watching one of your videos and LOVE it. Thank you. Just a quick question, can you save that as a JPG or PNG so I can add it to another design? I don't have Silhouette, I only have Cricut but would be willing to purchase the business edition of Silhouette if I can save the conical warp photos to be used later.
yes you can!!!
Thanks for your video, its helping me a lot.
Glad to hear that!
Another great video. I really enjoy your video's you make everything seem so easy. And your my enabler guru. LOL I've been holding off on sublimation but you talk me into it. I ordered an Epson ET 4700 printer from Target for $139.99 on sale. I can't wait until it gets here next week. The mug heat press also comes next week. I ordered mugs & they are here waiting for the printer. LOL Where did you get the tumblers from? I've been .\a subscriber to Creative Fabrica for a while. Love that site too. Thanks again for the great videos I'm learning alot about my Silhouette Cameo 3
Hi Star! I am soooo super excited to say that I have a new affiliate link that will save you 15% if you use my code. (FYI this is where I bought my tumblers before I was able to get the discount!!!) They really work well and are ready to sublimate right out of the box! They are from jpplus.com and my code is 9PLP84 to save 15% !!
Love your content
Thank you!
Watched your video yesterday and my question is…what is the purpose of tracing the logo?
Great Video.
Thanks Norma!!
Do you have a tutorial, or could you do one for a full wrap? I just don't understand how to use this tool at all. Thanks for any consideration.
I'm not sure I know what you mean. Can you give me a little more info?
@@PattyAnnesPlace a full page image. There would be a background image with another image and it would be duplicated so it prints on both sides of tumbler. So you use an entire sheet of paper. Wish I knew how to attach a photo to show you.
@@PattyAnnesPlace I would also like to know! She means if you're filling the entire cup. So for example you want the entire cup to be blue with a design on it.
Where did you buy the mug press? Love all you’re videos btw
I bought mine off of Amazon ....it was a 4 in one heat press. There are really nice ones sold through Heat Press Nation too.
Hey PattiAnne... I hate to ask, but where did you order the tumbler from? I check your list on Amazon, didn't see it. Is it already coated for sublimation?
Hi Joni!! I am soooo super excited to say that I have a new affiliate link that will save you 15% if you use my code. (FYI this is where I bought my tumblers before I was able to get the discount!!!) They really work well and are ready to sublimate right out of the box! They are from jpplus.com and my code is 9PLP84 to save 15% !!
Does it have to be precise? Math isn't my strong point. I just can't do fractions or read the tape measure correctly. Any tips?
I guess the easiest way would be to figure out the dimensions that you need for one and then always use the exact same brand of mug/tumbler and the exact same dimensions. That way you won't have to figure it out each time.
Hi. I purchased Silhouette Studio Business Edition mainly for this feature. Every time I try to use the conical warp it goes into processing mode and won't work. I was planning on making Christmas tumblers but I can't now that it won't work. I emailed Silhouette America and haven't received a response. This is my last ditch effort, do you have any suggestions? Thank you, stay safe.
I'm having the same problem. Did you ever get it to work... I've closed the stupid program and the processing bar is still sitting in the middle of my screen, ugh
I have the same issue. Did you ever find a solution? I’m at my wits end over this.
I have the same problem. Did you ever find a solution?