I do tumblers and have the business edition but I had no idea you can do this! I've always had a problem with placing my design on the cups. Thank you so much! ❤
Just want to say that I just got a silhouette Cameo 3 and was feeling very overwhelmed, also have a Cricut and getting sick of it, I have only watched a few of your videos and I feel soooo much better, thanks so much!!!
if i want to do a full tumbler waterslide, how do you do that? do you just try to center it in that space?? thanks for your help. And I love these tutorials. Sometimes it's a little fast for my brain to comprehend but i can rewatch.. Thanks again. Donna
How to make a custom Starbucks Vinyl Cup on our Facebook will show an easy way to measure this out with just paper: facebook.com/therhinestoneworld/videos/634445340478140 If that's not helpful, try this RUclips of ours going over the warp feature: ruclips.net/video/RsDLhh-N49w/видео.html Thanks! -TRW Crystal
Unfortunately we don't do much of sublimation on our channel, so I don't have a video to referred you to. But if you just look for it on RUclips I'm sure you ca find some helpful videos. -TRW Mireya
@@TheRhinestoneWorld I was thinking of the same thing, However it will be the same process, the only thing that will change is the media your putting it on. I'm trying to use a full picture and warp it to fill a tapered cup.
Vinyl yes, but rhinestones likely not. They'll need a few thousand holes knocked out to cut from the magic flock then place on the glitter. We have templates for a few kinds of cups already made on TheRhinestoneWorld.com though. -TRW Crystal
okay, sorry to write so much. I finally got it to accept my figures. However when I bring it into Design Space, the top width is too small. Across the top is 3.5, across the bottom is 3 and the height (where I want the wrap to stop) 4.5. The image I brought into design space is 6.251 x 4.631. The circumference of the top is 11 inches. Not big enough to wrap the tumbler. The stopping point is about 9 inches (I call this the waist).
Can you save warp dimensions? Say for a 20 oz tumbler, 30 oz tumbler, coffee mug? Can you put in your dimensions for an item and save it in the event that you are going to use the same dimensions for other items?
I am trying to do a full wrap on a warped tumbler, but I can not get the image to expand correctly. I have done it before and I am doing it the same way. I don't understand.
what about the shape of the 30 oz tumbler?? they have a shape on the middle part, and I can't put a imagen always it get wrinkle in that part, no matter what I do
Hello. Please email info@therhinestoneworld.com with a photo of the kind of tumbler that you are working with (that way we can picture it a bit better) and we'll try to get you an answer. - TRW Richard
You have to own Designer edition of Silhouette to have the toolbar unlocked. :) We sell the upgrade here: www.therhinestoneworld.com/Silhouette-Studio-Designer-Edition_p_2524.html -TRW Bri
Not yet, but I've passed the word on! Just a note, the Business Edition upgrade can export SVG files. You can get the upgrade and still use your bigger cutter. :) - TRW Lisa
Very informative ! Only correction is on the warp being less lower on the glass... actually the "warping" is greater towards the narrow bottom (and you can see the amount of change lessen in the dimensions as you moved the design higher. i.e. less warping). Question is the vertical dimension the length of the tumblers side? or the height of the tumbler?
There's a few ways to achieve warp :-) We appreciate you! Sorry we missed your comment! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Hey Lori! This is a feature that isn't very blatant in their software. At the very bottom of your right-hand toolbar, you will see a leftward facing arrow. Click that, and then click on the Warp button to open the Warp panel. Hopefully that helps! - TRW Haley
@@TheRhinestoneWorld after a lengthy conversation vis the internet (I hate that) I was told I needed to purchase designer edition plus which is 75.00!!! I don't know how my project work without that. Any ideas!?? Thanks for responding!
No, you can use Silhouette Business Edition without have a Cameo. Here is the link! www.therhinestoneworld.com/Silhouette-Studio-Business-Edition_p_2520.html -TRW Abby
Kim, your copy of Silhouette Studio may be outdated. Go to Silhouetteamerica.com and click on the update button. You will be taken to a page with the most recent version of Silhouette Studio. TRW Casey
I had the same issue. I upgraded from Silhouette 4.0 to 4.2 Business Edition and the new features showed up. I had gone to the "Check for updates" menu item and it didn't detect that there was a new version so I had to manually download and install it.
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
I do tumblers and have the business edition but I had no idea you can do this! I've always had a problem with placing my design on the cups. Thank you so much! ❤
Glad we could help! Be sure to keep an eye out on more awesome videos!
-TRW Abby
Just want to say that I just got a silhouette Cameo 3 and was feeling very overwhelmed, also have a Cricut and getting sick of it, I have only watched a few of your videos and I feel soooo much better, thanks so much!!!
if i want to do a full tumbler waterslide, how do you do that? do you just try to center it in that space?? thanks for your help. And I love these tutorials. Sometimes it's a little fast for my brain to comprehend but i can rewatch.. Thanks again.
Donna
Thanks for watching!
-TRW Abby
Is it possible to add an adjustable middle section for bottles? I am going to use this for now, but that would help out future projects!
I didn't know about this feature.....many thanks x
That's awesome Su M-M!
I'm a cricut user and I'm new to Silhoutte Design. I do have the business addition. I'm trying to figure out how to warp a entire wrap for a tumbler.
How to make a custom Starbucks Vinyl Cup on our Facebook will show an easy way to measure this out with just paper: facebook.com/therhinestoneworld/videos/634445340478140 If that's not helpful, try this RUclips of ours going over the warp feature: ruclips.net/video/RsDLhh-N49w/видео.html Thanks! -TRW Crystal
Conical is also in the designer plus edition :)
Awesome! -TRW Crystal
when you measure the top and bottom of the cup are you measuring around (circumference) the whole top or bottom or just across (side to side)?
Annette,
I believe we're just measuring from side to side.
TRW Alexis
How do you do a FULL warp for sublimation? I am trying to do a shot glass and when I use the cone It's way off. I do have the correct dimensions.
Unfortunately we don't do much of sublimation on our channel, so I don't have a video to referred you to. But if you just look for it on RUclips I'm sure you ca find some helpful videos.
-TRW Mireya
@@TheRhinestoneWorld I was thinking of the same thing, However it will be the same process, the only thing that will change is the media your putting it on. I'm trying to use a full picture and warp it to fill a tapered cup.
can i use this tool to make a full wrap template for the tumbler? like for rhinestones etc or HTV Glitter
Vinyl yes, but rhinestones likely not. They'll need a few thousand holes knocked out to cut from the magic flock then place on the glitter. We have templates for a few kinds of cups already made on TheRhinestoneWorld.com though. -TRW Crystal
okay, sorry to write so much. I finally got it to accept my figures. However when I bring it into Design Space, the top width is too small. Across the top is 3.5, across the bottom is 3 and the height (where I want the wrap to stop) 4.5. The image I brought into design space is 6.251 x 4.631. The circumference of the top is 11 inches. Not big enough to wrap the tumbler. The stopping point is about 9 inches (I call this the waist).
Did you say you have Sil Biz? No need for DS if so :-) -TRW Crystal
Can you save warp dimensions? Say for a 20 oz tumbler, 30 oz tumbler, coffee mug? Can you put in your dimensions for an item and save it in the event that you are going to use the same dimensions for other items?
As of right now, it is not an option, but hopefully soon! - TRW Lisa :)
I am trying to do a full wrap on a warped tumbler, but I can not get the image to expand correctly. I have done it before and I am doing it the same way. I don't understand.
Try this method:
ruclips.net/video/rKXNWBBLEO0/видео.html
-TRW Crystal
what about the shape of the 30 oz tumbler?? they have a shape on the middle part, and I can't put a imagen always it get wrinkle in that part, no matter what I do
Hello. Please email info@therhinestoneworld.com with a photo of the kind of tumbler that you are working with (that way we can picture it a bit better) and we'll try to get you an answer. - TRW Richard
Do you know if I can export SVG to Cricut design space? I have a Cricut but am thinking about buying silhouette business edition
Hi Mike, Business Edition allows you to export an SVG. Here's a video how. ruclips.net/video/YQxI4GLvuHc/видео.html
:) TRW Lisa
How should I adjust the setting when working with a wine glass?
Good video but the difference before and after warping is negligible with the for sale design you chose. :)
What if the tumbler has an odd shape in the middle? I am using the football shaped tumbler, does that make a difference?
It shouldn't depending on how big your decal will be!
- TRW Haley
hi.... HOW do I get the conical wrap??? I have cameo 3, thanks
You have to own Designer edition of Silhouette to have the toolbar unlocked. :)
We sell the upgrade here:
www.therhinestoneworld.com/Silhouette-Studio-Designer-Edition_p_2524.html
-TRW Bri
@@TheRhinestoneWorld you have to have designer edition plus...75.00!
Lisa is there a feature for Corel Draw? I have the big cutter and dont want to have to buy a smaller cutter if I dont have to
Not yet, but I've passed the word on! Just a note, the Business Edition upgrade can export SVG files. You can get the upgrade and still use your bigger cutter. :) - TRW Lisa
how can see the video to wrap ornaments
Hello Monica Rivera,
I will tell our Silhouette trainer about your video idea! - TRW Aaron
Good video Lisa
Very informative ! Only correction is on the warp being less lower on the glass... actually the "warping" is greater towards the narrow bottom (and you can see the amount of change lessen in the dimensions as you moved the design higher. i.e. less warping). Question is the vertical dimension the length of the tumblers side? or the height of the tumbler?
Hello,
You can adjust the dimensions for the height and the length of the design.
TRW, Grant
Can you use the warping tool when doing a disk shaped ornament?
There's a few ways to achieve warp :-)
We appreciate you!
Sorry we missed your comment!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal
Hi i have the business edition and I dont have the wrap tool. How do I get it?
The call center will be able to help you with this! They are open Monday-Friday 9am-5pm. 941-755-1696
-TRW Abby
I have version 4.3 and it does not give me the same information. What do you suggest?
Hey Lori! This is a feature that isn't very blatant in their software. At the very bottom of your right-hand toolbar, you will see a leftward facing arrow. Click that, and then click on the Warp button to open the Warp panel. Hopefully that helps!
- TRW Haley
@@TheRhinestoneWorld after a lengthy conversation vis the internet (I hate that)
I was told I needed to purchase designer edition plus which is 75.00!!!
I don't know how my project work without that. Any ideas!??
Thanks for responding!
I dont have it in designer edition😭
Do you have to own a Silhouette in order to use the Silouette business edition?
No, you can use Silhouette Business Edition without have a Cameo. Here is the link!
www.therhinestoneworld.com/Silhouette-Studio-Business-Edition_p_2520.html
-TRW Abby
How do you add the tumbler as an option?
That's not automatically showing up in your software?
TRW Alexis
@@TheRhinestoneWorld I dont have that option either
I have the business edition but my buttons are not the same as yours
Kim,
your copy of Silhouette Studio may be outdated.
Go to Silhouetteamerica.com and click on the update button.
You will be taken to a page with the most recent version of Silhouette Studio.
TRW Casey
I had the same issue. I upgraded from Silhouette 4.0 to 4.2 Business Edition and the new features showed up. I had gone to the "Check for updates" menu item and it didn't detect that there was a new version so I had to manually download and install it.
The only problem is you didn't show how you got the measurements!
Are you asking for the measurements of the cup or the design?
-TRW Mireya
nevermind. I figured it out. The file will not allow itself to be warped.
Hopefully all is going well with it -TRW Crystal