Hi all. I fitted the second one today to my Yaris 2018. It will fit most cars. The only and best way to fit this is do the prep then put the strip in place using the applied adhesive. You then need to use self tapping screws with washers behind the heads at approx 10cm intervals but only in the narrow part of the strip which has the adhesive on. It works like a dream and will not drop off in the slipstream. I dragged the first one off a few months ago as the slope from my garage up onto the drive was too steep which I have now sorted out. You can of course spend a load of bucks, quid, euro on a factory one but it is what it is and only you are going to notice it really. Oh, and yes, do cut triangles out to make it flex around corners.
That is true, I did say you can insert the screws if you would like, but I did not screw it in for my car . Still hasn't fallen off but the sides do sag a bit .
Hi all. I fitted the second one today to my Yaris 2018. It will fit most cars. The only and best way to fit this is do the prep then put the strip in place using the applied adhesive. You then need to use self tapping screws with washers behind the heads at approx 10cm intervals but only in the narrow part of the strip which has the adhesive on. It works like a dream and will not drop off in the slipstream. I dragged the first one off a few months ago as the slope from my garage up onto the drive was too steep which I have now sorted out. You can of course spend a load of bucks, quid, euro on a factory one but it is what it is and only you are going to notice it really. Oh, and yes, do cut triangles out to make it flex around corners.
I buy it But i havent stall it yet on a 2024 honda
You cannnnnnn dooooooo itttttt
Can you screw the rods to it
You mean like self taping screws ?
@@DocMackGarage no the Splitter Strut Rods
@@keldrinewade7053 I see what you mean ,no not on this unit.
@@DocMackGarage oh ok thx
It just look so flimsy. Wind drag will rip that flap right off the bumper. Just doesnt look very sturdy.
I had it for two years , only corners peeled a bit. Added self tapping screws and lasted 2 years +. It is more for looks only .
One speed bump that's gone
If they drive like you then it certainly will be 😉. I have had it on for a year and no issues but am a careful driver. .
@@DocMackGarageSheeeesh 🥶 ice cold babyyyy
@@policecat6920 make sure to subscribe 😃
You have to screw it on, otherwise it will fall off.
That is true, I did say you can insert the screws if you would like, but I did not screw it in for my car . Still hasn't fallen off but the sides do sag a bit .
@@DocMackGarage fi you drive 200km/h it will fall off:)
@@lorsamadey2435 Haha lol, top speed in this car is 260kmh on the clock.
@@DocMackGarage I screwed mine still fell off and the rubber isn't strong it ripped after I slightly bump into a sidewalk.
@@dailydad6335 These things are not meant to be bumped . It is more for looks. You can try applying some silicone .
Bro come on
Looks great doesn't it ?