CNC Wooden Inlay - Walnut Endgrain Cribbage Board with Maple Inlay
HTML-код
- Опубликовано: 11 сен 2024
- Some of my steps in the process for making a walnut endgrain cribbage board with maple Inlay
This board was finished with Danish Oil.
Finishes:
Odie's Oil: amzn.to/3szoAJG
Walrus Oil - Board Oil and Wood Butcher Block Oil, 32 oz Jug: walrusoil.sjv....
CNC Bits:
CNC Router Bit 6mm Shank 2 Flutes Straight Carbide 0.3mm Tip 15 Degree: amzn.to/3FUjYnJ
CNC Router Bits 3.175 Endmill Flat Nose Two Flute Spiral Upcut: amzn.to/37dTb7S
Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length: amzn.to/3qQFa9z
Supplies:
Spectape ST501 Double Sided Adhesive Tape, 36 yds Length x 1" Width Paper: amzn.to/3iLE2zL
3M Xtract Cubitron II Net Hook and Loop Sanding Disks: amzn.to/3qKV31e
For my board conditioner:
UltraPro Food Grade Mineral Oil, 1 Gallon (128oz): amzn.to/3713BKd
Beesworks Beeswax Pellets: amzn.to/3wQEYLa
Moretoes 36 Pack 2 Oz Metal Round Balm Tins Black Aluminum Cans Empty Containers: amzn.to/3Dph4HX
ARB Woodwork t-shirt: amzn.to/3DpiguV
❤❤❤❤❤❤❤
Thank you buddy!!!
That turned out fantastic! How long did the carve take?
Thank you! The hole pattern was about an hour. Then for the inlay pocket it was about 45 min for the end mill and 45 min for the 15 degree bit. About an hour each for the plug. I still have to figure our the feeds and depths for these bits to try to cut the time.
Very nice work!! How deep to you go for the pockets and what’s your start depth and flat depth for you plug??
Very nice works!, in the the male inlay do you make the 3 clearence first and then the 3 V bits?. thanks
With my old machine I had to do that. It was belt driven and could not handle the strain doing it all in one pass.
I am curious as to what size that board is.
I have made several round boards and several smaller ones but I would like to try something larger.
Thanks In Advance
The board in this video was probably 16 x 8 inches.
@@ARBWoodwork You do some beautiful work. Good luck on all your future projects.
Thanks for the fast response.