Very nice, love the rear lights! Deep 6 those mirrors for a single left peep mirror, the tricycle reflectors and the Hokey "Bobber Bonnie" stickers and it would be perfect. Love my Bobber. B Customs cat eliminator and Sleeper Pros going on mine tomorrow.
Can you explain the mods you did to the rear short fender? I am getting mine shipped to me and will be installing the NRC tail lights, license plate relocator and front lights when it comes in. I like how your fender is smooth.
Hey!! How did you wire in the rear light!? I got the same thing but there's only 3 wires when there should be 4? Brake like turns on but doesn't change when braking. Anyone help me out?
Awesome way to hide the front turn signals, very clever. Wonder what's in store for 2018? Hope this bike is doing well and they continue with it. I would like to get one.
Love the front and rear turn signals. I checked on New Rage's website and didn't see anything specific to the Bobber. Any chance you can provide a link to purchase? Also, an install video for the signals would be awesome! Thank you!
Garrett Jackowiec Hey Garrett....... I just checked the site and they are still on there. Go to new rage cycles and click Triumph. I think it was the first item on the left. I had a local shop install them. Good luck with your mods. I’m getting ready to make several more changes myself.
Yeah takes 10 mins. There is a plastic fitting under themirrow clamp on only the RHS change it to the LHS as well. Suggest you do the change & see if they are safe. For me they do not work at all. In South Africa you will be dead on your first ride so....I need to change them back tomorrow! Good Luck.
The front and rear lights were purchased from a company called New Rage Cycles. The rear lighting setup is a Street Twin Fender Eliminator Kit ($270). They shipped quick and it was plug and play.
Picked up my Bobber in the same Ironstone. Have only ridden it 1 mile to unload and place in my heated garage, it was a BLAST!!! Can't wait for riding season. Thanks!
I have a short rear fender and let me tell you the mess is horrendous, my matt black tank gets dirty, the pipes get dirty, my helmet and back get covered in dirty water and anything behind me gets best stay back about 10 bike lengths it looks great but in UK weather is a liability if you ride in the rain.
Great looking mods Rob. Had a question about your rear fender. Did you cut the stock fender or did you buy the Triumph bobbed fender offering? Your fender looks "more bobbed" than what I've seen from the Triumph after market one. I really like the look you got!
Nice bike man. I went on the rage cycles site but not sure which taillight kit you got that fits for the seat. Can you point me in the right direction?
NARBE VAGHARSHAKIAN the seat kit is for a Triumph Street Twin. I copied a bike build by a Triumph dealer in Florida. It kits great and looks even better in person. Let me know if I can help further.
Would you be willing to share which Florida Triumph Dealer did the build you took the inspiration from. I'm about to buy a Bobber from Triumph of Tampa. Also, I guess out of necessity it would have to be done with one of the seats that has the lower pan. I was looking at the Triumph Statement seats, but those don't make use of the seat pan.
![SahBabii - Viking [Official Music Video]](http://i.ytimg.com/vi/D37cL92JX0I/mqdefault.jpg)
Nothing better than dirt and mud slung up your back after a short ride!
Very nice, love the rear lights! Deep 6 those mirrors for a single left peep mirror, the tricycle reflectors and the Hokey "Bobber Bonnie" stickers and it would be perfect. Love my Bobber. B Customs cat eliminator and Sleeper Pros going on mine tomorrow.
Beautiful bike
Do the barrell grips. You'll love em.
nice bike and garage!
So good, wow.
Can you explain the mods you did to the rear short fender? I am getting mine shipped to me and will be installing the NRC tail lights, license plate relocator and front lights when it comes in. I like how your fender is smooth.
William Langer hey William. I had the short rear triumph fender cut further. It was cut with an angle grinder. Hope that helps.
In reference to that comfort cross stitched seat, is it more comfortable and more padded than the stock seat?
Thank you.
Where are you buy the bike accessories
Hey!! How did you wire in the rear light!? I got the same thing but there's only 3 wires when there should be 4? Brake like turns on but doesn't change when braking. Anyone help me out?
Can you do a fitting video of the brake lights and turn signals?
Morgan Maggs
Sure. I’m tied up the next couple of days but I’ll have time on Sunday.
Awesome way to hide the front turn signals, very clever. Wonder what's in store for 2018? Hope this bike is doing well and they continue with it. I would like to get one.
where did you buy all the items your showing ? good job
Please tell us
www.newragecycles.com/Triumph_Bobber_Fender_Eliminator_Kit_p/bobber-fe.htm
&
www.newragecycles.com/Rage360_Turn_Signals_p/rage-360.htm
Hi, from Chile. I cant get the turn fron signal 41mm diameter. Can you say me where you buy.
item.taobao.com/item.htm?spm=a1z0k.7386009.0.d4919233.208f70e8sIq1ha&id=593943969711&_u=t2dmg8j26111
I'm thinking of switching out my stock fenders to the shorter style. Where did you get yours and did they bolt right on?
No Brasil, não passa numa Blitz de trânsito.
hello Rob, hope all is well. Where did you get that side plate display? and did you cut the rear fender?
Love the front and rear turn signals. I checked on New Rage's website and didn't see anything specific to the Bobber. Any chance you can provide a link to purchase? Also, an install video for the signals would be awesome!
Thank you!
Garrett Jackowiec Hey Garrett....... I just checked the site and they are still on there. Go to new rage cycles and click Triumph. I think it was the first item on the left. I had a local shop install them. Good luck with your mods. I’m getting ready to make several more changes myself.
That does look so much better, the stock rear lights look terrible
Hi! Great Bike. Do you use relay or resistors to get the flash rate right?
Arturo Arques I ordered them with resistors.
Sick! Nice work mang! How did you do the rear fender?
Sick
Question, so on the mirrors, did you just put them on the opposite sides and face them down? I've been looking for some
Rob I️ just turned them face down. Easy mod that does not cost you anything.
Yeah takes 10 mins. There is a plastic fitting under themirrow clamp on only the RHS change it to the LHS as well.
Suggest you do the change & see if they are safe. For me they do not work at all. In South Africa you will be dead on your first ride so....I need to change them back tomorrow! Good Luck.
i am from India, i own a bobber. Dear can u seggest me where i can get the tail light set
arun arun try the new rage cycles website and see if they will ship to India. Good luck!
thank you rob marchand
Awesome! For the front turn signals did you do the load equalizer or running light upgrade? Thanks
Those rear lights look so much better!! Any chance you could post a link to where to buy them??
The front and rear lights were purchased from a company called New Rage Cycles. The rear lighting setup is a Street Twin Fender Eliminator Kit ($270). They shipped quick and it was plug and play.
Do you usually keep your receipts for your purchases?
Exactly the info I needed! Love the look. Planning to copy it on my own Bobber.
I want these mods. Thanks for posting mate.
Great looking!
Where did you get the engine temp Guage?
The Blind Spot A&J Cycles. They have a bunch of Bobber parts online.
What kind of floor is that? I hope to deal on a Bobber tomorrow!
Jonny TheKid thanks.......it’s RaceDeck flooring.
Picked up my Bobber in the same Ironstone. Have only ridden it 1 mile to unload and place in my heated garage, it was a BLAST!!! Can't wait for riding season. Thanks!
Beautiful!
Do you have any issue when it's raining with the rear fender?
Pan Artemis I haven’t ridden in the rain yet.
same question here do you take a rain beating from both ends of short fenders
I have a short rear fender and let me tell you the mess is horrendous, my matt black tank gets dirty, the pipes get dirty, my helmet and back get covered in dirty water and anything behind me gets best stay back about 10 bike lengths it looks great but in UK weather is a liability if you ride in the rain.
What diameter size are the front turn signals?
Robert Dixson 41mm
Great looking mods Rob. Had a question about your rear fender. Did you cut the stock fender or did you buy the Triumph bobbed fender offering? Your fender looks "more bobbed" than what I've seen from the Triumph after market one. I really like the look you got!
Nice bike man. I went on the rage cycles site but not sure which taillight kit you got that fits for the seat. Can you point me in the right direction?
NARBE VAGHARSHAKIAN the seat kit is for a Triumph Street Twin. I copied a bike build by a Triumph dealer in Florida. It kits great and looks even better in person. Let me know if I can help further.
Would you be willing to share which Florida Triumph Dealer did the build you took the inspiration from. I'm about to buy a Bobber from Triumph of Tampa. Also, I guess out of necessity it would have to be done with one of the seats that has the lower pan. I was looking at the Triumph Statement seats, but those don't make use of the seat pan.
Its a fuk all bike