I knew this could do the job! The customer shouldn’t have worried about it! You also would make sure the job was clean and completely finished. Keep up the good work!
I had zero doubts that the.Ventrac could make it through this law and make it look awesome. As I've said a million times, Another awesome job. Well done.
I knew this could do the job! The customer shouldn’t have worried about it! You also would make sure the job was clean and completely finished. Keep up the good work! Illinois here!
@@TheLawnCareLifeinMowssouri Oh yeah I seen them too, and it still whooped those situation. VENTRAC ALL THE WAY!!!! HAPPY BIRTHDAY JESUS, AND MERRY CHRISTMAS!!!
I love that ventrac... Wish I could justify buying one. I had a guy scoff when I showed up to bush hog 25 acres on an 83 year old tractor.... I just chuckle and mow.... Your machine has more horsepower than my tractor! ( South Carolina)
I always say you gotta figure out a way to let your passion or hobbies pay for themselves. A handful of good jobs throughout the year and you’ll have a Ventrac paid for in no time! What kind of tractor do you have? I appreciate you tuning in from South Carolina! I’ve never been there, but would like to visit someday. Best thing to see in SC?!
@TheLawnCareLifeinMowssouri I actually have 2 tractors... 1939 Ford 9n and a 1958 Ford workmaster. I'm in the upstate..soo much to see from the mountains to the ocean... Tons of history we are only 3 miles from Cowpens national battlefield. Revolutionary war.
Thanks for tuning in from West Virginia! Last time I was up that way I ended up in Morgantown to buy some Ventrac equipment! Check out the last two videos, they were pretty long! This was a pretty easy job, so not a whole lot to record. But I will keep that in mind for future videos. Appreciate the support!
From the UK brother. Love Ventrac seen the flail in other videos. They can be specced a lot wider than the tough cut so could be more coverage with each pass?
ABSOLUTELY!!! A walk in the park for the Ventrac. The flail deck would’ve left a really nice cut on the first pass. I’ll have one someday. Thank you for taking the time to watch! I really appreciate it.
How far is that from Ventrac headquarters? I’ve been to Orville twice. Didn’t want to leave without taking some Ventrac equipment home lol. How long have you owned the 4200?
I am, and have been, a Ventrac champion!! I have seen these beasts in action in flatlands, mountains, swampy areas, overgrown to the max and even massive blackberry bushes, small trees and stuff no other machine, short of a huge commercial tractor bush hog would take on!! Loveeeee Ventrac and love your vids. Please keep making more vids of your real work, you have been missed (and no, no that damn robot mower, sorry but I love seeing People do work, not robots. jmho)!!
Not a doubt in my mind that the Ventrac would breeze right through that. You done exactly what I would have done and cross cutted on the second go round. I know Ventrac attachments are pretty expensive but I think a good flail/finish 60 inch deck would definitely be an asset to your arsenal. lol. Keep up the great work man. Bruce in Wv!!!
Hey Bruce, thanks for the continued support! I have to get the one-two combo. Hopefully I can get the flail mower deck soon. I think it would have done great on this property. More Ventrac videos coming…
This one was a walk in the park for the Ventrac. Thanks for tuning in from Georgia. I have several friends in the Lawn Care industry that live down there. One lives just outside of Atlanta near Lake Oconee.
@@TheLawnCareLifeinMowssouri My late father worked for Georgia power we had one of the best lots on Sinclair growing up it was sold to a friend of his back in 94 I tried to keep it but he wanted to sell. Have family that lives on Oconee. Take care Merry Christmas.
I have watched a flail mower (not a ventrac) cutting thicker grass and brush than on this video.. I was very impressed with it. It was slightly wider than the tough cut. I am from Queensland Australia.
Thank you, Trevor! On a job like this, you can usually run about 4-5 mph which is top speed for low range. The Ventrac tops out at 10 mph in high range.
Not sure why the man would have been skeptical over that. To be honest, most of that could be handled quite easily by a zero turn with the right blades under it. Walk in the park for that machine there. You said be honest, and I always am. I would have cut that like you did, but my return pass would have been right back over the pass I just finished like you did for the second half, but I would have t turned around which helps the front edge/skirt of the deck push the bent over stuff back upright and leaves a cleaner finish and you technically only have to go over the place once, plus by having the more open side of the deck facing the work, it would help prevent the tires from maybe popping a stick or branch up and jamming it into the rear skirt of the deck. Just slightly offset the caster tires from their previous pass to help with not running the bent stuff down a second time. I agree- the flail mower would be the right choice there. I'd probably choose the shovel knives over the Y knives for a long weed job like this though. From MI .
I knew this could do the job! The customer shouldn’t have worried about it! You also would make sure the job was clean and completely finished. Keep up the good work!
I had zero doubts that the.Ventrac could make it through this law and make it look awesome. As I've said a million times, Another awesome job. Well done.
You're a good advertisement for Ventrac. They should be giving you some good deals on the other attachments. Thanks for the video's!
I knew this could do the job! The customer shouldn’t have worried about it! You also would make sure the job was clean and completely finished. Keep up the good work! Illinois here!
I knew the Ventrac could handle the job; I watching from Jacksonville, Florida!!!
You didn’t doubt it…that’s great! Appreciate you tuning in from Jax! I have family and friends in your neck of the woods. Enjoy that sunshine! ☀️
That was a cake walk for the VENTRAC............VENTRAC SMOKED THAT LITTLE AREA!!!
Haha yes it was! You knew it was gonna be an easy one. Especially if you caught the last two videos that I posted. Thanks for watching!
@@TheLawnCareLifeinMowssouri Oh yeah I seen them too, and it still whooped those situation. VENTRAC ALL THE WAY!!!! HAPPY BIRTHDAY JESUS, AND MERRY CHRISTMAS!!!
I love that ventrac... Wish I could justify buying one. I had a guy scoff when I showed up to bush hog 25 acres on an 83 year old tractor.... I just chuckle and mow.... Your machine has more horsepower than my tractor! ( South Carolina)
I always say you gotta figure out a way to let your passion or hobbies pay for themselves. A handful of good jobs throughout the year and you’ll have a Ventrac paid for in no time! What kind of tractor do you have? I appreciate you tuning in from South Carolina! I’ve never been there, but would like to visit someday. Best thing to see in SC?!
@TheLawnCareLifeinMowssouri I actually have 2 tractors... 1939 Ford 9n and a 1958 Ford workmaster. I'm in the upstate..soo much to see from the mountains to the ocean... Tons of history we are only 3 miles from Cowpens national battlefield. Revolutionary war.
Kameron, I really enjoy your videos that Ventrex is a beast. Keep the videos coming. I will continue watching great job.
It’s a overgrown lawn cutting machine! Thanks for the support! More Ventrac videos coming…
West Virginia here! :) p.s... also wish your vids were longer like they used to be! Love watching you do your magic!
Thanks for tuning in from West Virginia! Last time I was up that way I ended up in Morgantown to buy some Ventrac equipment! Check out the last two videos, they were pretty long! This was a pretty easy job, so not a whole lot to record. But I will keep that in mind for future videos. Appreciate the support!
California. Wow great job You did on this property ☺😊😁🤗👍💜
I had a couple of customers move here from California over the years. Thanks for tuning in from the West coast! I appreciate you watching. 👍
Love that machine
Ohhhh yeah!!!! 💯
I could watch that all day long here from Illinois way to go Camron
Awesome! Thanks for watching the Ventrac work. And thanks for tuning in from Illinois! Home of ECHO outdoor power equipment. 👍💯😎
From the UK brother. Love Ventrac seen the flail in other videos. They can be specced a lot wider than the tough cut so could be more coverage with each pass?
Compared to the last one or two this was a piece of cake. Could see both decks being used.
ABSOLUTELY!!! A walk in the park for the Ventrac. The flail deck would’ve left a really nice cut on the first pass. I’ll have one someday. Thank you for taking the time to watch! I really appreciate it.
If I was looking for a mower I’d be getting one of these. Very nice machine! Nice work!
It can plow through just about anything! Thank you for taking the time to watch. I appreciate the support! 💯
Watching from Orlando used to live in MO great machine
Awesome! Send some of that warm sunshine this way.
I'm from sugarcreek Ohio. Like the ventrac. I have a 4200 vxd.
How far is that from Ventrac headquarters? I’ve been to Orville twice. Didn’t want to leave without taking some Ventrac equipment home lol. How long have you owned the 4200?
Worked very well.
Ohhhh yeah! 👍👍👍
I am, and have been, a Ventrac champion!! I have seen these beasts in action in flatlands, mountains, swampy areas, overgrown to the max and even massive blackberry bushes, small trees and stuff no other machine, short of a huge commercial tractor bush hog would take on!! Loveeeee Ventrac and love your vids. Please keep making more vids of your real work, you have been missed (and no, no that damn robot mower, sorry but I love seeing People do work, not robots. jmho)!!
Thanks for letting me know that you believe in the Ventrac!!! And thank you for the SUPPORT! 💯 More Ventrac videos coming soon…
I knew that the Ventrac would do it very nicely.
Alright!!!! That’s what I’m talking about. 👍
Not a doubt in my mind that the Ventrac would breeze right through that. You done exactly what I would have done and cross cutted on the second go round. I know Ventrac attachments are pretty expensive but I think a good flail/finish 60 inch deck would definitely be an asset to your arsenal. lol. Keep up the great work man. Bruce in Wv!!!
Hey Bruce, thanks for the continued support! I have to get the one-two combo. Hopefully I can get the flail mower deck soon. I think it would have done great on this property. More Ventrac videos coming…
@ I agree with ya Cameron that property turned out great.
Looking good I've seen your Ventrac cut some thick stuff before watching from Georgia.
This one was a walk in the park for the Ventrac. Thanks for tuning in from Georgia. I have several friends in the Lawn Care industry that live down there. One lives just outside of Atlanta near Lake Oconee.
@@TheLawnCareLifeinMowssouri My late father worked for Georgia power we had one of the best lots on Sinclair growing up it was sold to a friend of his back in 94 I tried to keep it but he wanted to sell. Have family that lives on Oconee. Take care Merry Christmas.
Great job
Thanks, Jerry! I appreciate the support. Hope you and your family have a very merry Christmas!
You are very welcome. You do a great job, I hope you and your family have a very merry Christmas as well.
Tullahoma Tennessee.
Thanks for tuning in from Tennessee! Is that anywhere near the great Smoky Mountains National Park?
I have watched a flail mower (not a ventrac) cutting thicker grass and brush than on this video.. I was very impressed with it. It was slightly wider than the tough cut.
I am from Queensland Australia.
Wow! Thank you for tuning in from Australia 🇦🇺. I think the flail mower deck is the way to go if you want it chewed up more and a cleaner cut. 💯
Merry CHRISTmas to you and your family bro!
Thank you! Have a merry Christmas and a blessed 2025!
@@TheLawnCareLifeinMowssouri Thank you.
That flail mower deck is impressive, one time across would have been sufficient
Can’t wait to get one someday! Thank you for watching. 👍
Fantastisch Good work lawn you the best te famely te natuur te helpen best friend Top weekend merry christmas 🚚🚜🌾✔️🤗🍹⛅👍🧤🎽🧢😎🎄🎁🎅🥂✳️
You’re the best. Thank you for watching. Appreciate the support. 💯 👍😎
Rocky Mount NC
Thanks for tuning in from NC! Appreciate the continued support.
South west missouri, fescue, etc.
Hey 👋 neighbor! I think Fescue is the best. Nice and green. Stripes really well!
👌🏻
Thank you!
In my opinion that
was some what of
easy one for the
Ventrac.
I agree! Some jobs are a walk in the park for the Ventrac. Especially compared to the last two jobs that I tackled. Thanks for watching!
great job was you going half speed or full speed through those weeds.
Thank you, Trevor! On a job like this, you can usually run about 4-5 mph which is top speed for low range. The Ventrac tops out at 10 mph in high range.
Darlington Wisconsin
Way up north! Are you guys getting any snow up that way? Thanks for taking the time to watch.
Yes
Awesome! ❄️
👍👍👍👍😁😁😁👍
💯👍😎
springfieville mo.
Awesome! Good to see a fellow Mowssourian in here. Appreciate you watching!
Ventrac is 1 step below a drum mulcher. Drum mulcher cost thousands more.
You are 100% right! Thank you for watching.
Not sure why the man would have been skeptical over that. To be honest, most of that could be handled quite easily by a zero turn with the right blades under it. Walk in the park for that machine there. You said be honest, and I always am. I would have cut that like you did, but my return pass would have been right back over the pass I just finished like you did for the second half, but I would have t turned around which helps the front edge/skirt of the deck push the bent over stuff back upright and leaves a cleaner finish and you technically only have to go over the place once, plus by having the more open side of the deck facing the work, it would help prevent the tires from maybe popping a stick or branch up and jamming it into the rear skirt of the deck. Just slightly offset the caster tires from their previous pass to help with not running the bent stuff down a second time. I agree- the flail mower would be the right choice there. I'd probably choose the shovel knives over the Y knives for a long weed job like this though. From MI .
One to knock down,the other to finish.
That would be a great combo!
@ now the tough part, balancing act. Do you have or can you generate enough work to feed both tools?
Me I'm from Illinois
Illinois - hey neighbor! 👋 Thank you for watching!
He's got enough land to run some cows. He could do rotational grazing and grow his own beef.
Hey, there you go! I like that idea. Nothing wrong with living off the land. Fill the freezer for the whole year. Thanks for taking the time to watch!
Central Ohio
Thanks for tuning in from OHIO! Home of VENTRAC 🇺🇸
Fantastisch Good work lawn you te best te famey te helpen te natuur te best fried Happy Crismas men Top 🚛🪤🚜🌾🌿🎧🧋🍂💯🎄🎁🎉🎋🥂👍
Thank you for watching! Have a merry Christmas! 👍😎💯
Great job
Thank you!