Normally not a fan of the live edge.This is a happy and beautiful exception! Love the way you left the original shape flat plate incorporated into bowl. Super cool idea!
Gosh ..... first time I've seen a Record woodturning lathe in all the videos I've watched, I used to hanker after one of them when I bought handtools in Buck and Ryan's on Tottenham Court Road. Excellent, thank you !
Very different approach and result from a crotch piece. Will approach the pieces I have in my wood shed in an alternate way in the future. Keep up the thought provoking videos. Doug in South Australia.
About ten years ago I gave a chunk of Osage Orange to a friend of mine who is an experienced bowl maker, and he said that as he tried trimming the piece down that small chunks flew off and left cavities that made it even harder to deal with on the second pass, so that he gave up on it. Osage Orange is the hardest wood growing in north America.But I bet if someone could make a bowl out of it that it would last for 1000 years.
Wow, absolutely beautiful, How long was the total time in turning this piece of art ? ///// Vau, aivan kaunista, kuinka kauan tämän taideteoksen kääntämiseen kului aikaa?
hard to say. filming takes so much time along with work. Maybe it took about 15-20 hours to do this project, including editing and filming. I don't take the time though when this is just a hobby.
wow, that was such a good video.. the grain on this piece is fantastic, the final shape turned out great and the finish came out great too.. but I love all that spalting and grain... thank you for sharing..
Question: if I put something that non-symetrical on my lathe it would wobble so terribly that it may fall over (or at least walk across the shop). How do you make it turn so true with a non-round blank?
Good question. i have lots of weight under the benchtop helping to keep lathe stable. that piece was not that non-symmetrical what it looks. litlle bit tweaking between centers while belt is off(easy to find sweetspot when belt is off).
Thanks! 12*36 inches or 30*90cm between centers. headstock swiveled 15 inches diameter manufacturer tells. and it have 450w motor and 3 speeds 450 950 2000 rpm. good lathe but i am dreaming to get someday bigger and more powerful lathe.
Awesome project. I'm going to give you some advice even though you don't know me, and you didn't ask. Set the piece turning and then look through the camera. If it's blurry slowly change the lathe speed until it clears, this might take a few tries. If the picture is clear, it will be much more enjoyable to watch, and you will gain more subscribers. I have just subscribed to your channel, and I hope you are not offended by this comment. 😎
Thanks for commenting! this lathe have only 3 speeds 500 1000 or 2000. hard to turn slowly speed =D my camera gives me bad times or i cant use it properly. i struggle lot of with filming.but learning always something new with every project. And thanks for subscribing ill try to keep getting better videos to watch!
@@jarkko.makkonen muotoilu on tekijän näkemys. Mielestäni aivan sama mitä mieltä muut, vaikka mainitsinkin asiasta. Onko puutilanne helpottunut? Sorvattavaa löytyy?
I love everything about this beautiful unique looking piece great job!! And thanks for showing that towel catch, a great example to remind us to be weary of loose clothing or entangling anything like that around fingers (I can sometimes do..) when gripping to wipe etc. I am quickly becoming more and more of a fan of birch. Just got my hands on some so looking for inspiration, THANK YOU for a great example of its potential! :)
thanks for commenting! i will try my best to do things what no one have seen ever but it isnt easy. I have a few projects in mind as long as I find the suitable blanks.. stay tuned!
have to feel where to cut and wich order to keep plank balanced. this plank of birch thankfully was pretty balanced start to finish ! always it is not that easy.
@@jarkko.makkonen It sounds like it is something that would not be easy for a beginner if it was an odd shape. Probably a beginner should get some experience wood turning on more or less symmetrical pieces first.
What a fantastic piece of wood, and you turned it beautifully. Thank you
Thanks for watching!
Normally not a fan of the live edge.This is a happy and beautiful exception! Love the way you left the original shape flat plate incorporated into bowl. Super cool idea!
thanks a lot! ill try my best to do things bit differentely
Very beautiful. I love birch and the way grain pops.
Very well done. You showed me a different design with this piece and I'm always looking for something different and this is beautiful.
thank you! ill try my best to figure out different designs and shapes, sometimes it work sometimes it wont.
Gosh ..... first time I've seen a Record woodturning lathe in all the videos I've watched, I used to hanker after one of them when I bought handtools in Buck and Ryan's on Tottenham Court Road.
Excellent, thank you !
Thank for watching!
Nice!! That spalting really adds character to this piece! 👍
Oooh, the spalting on this piece is fantastic.
I had no idea birch markings went all the way thru. Very unique and beautiful piece.
Thank you!👍
You are doing a great job
Very different approach and result from a crotch piece. Will approach the pieces I have in my wood shed in an alternate way in the future. Keep up the thought provoking videos. Doug in South Australia.
Thanks Doug. ill try my best!
Very unique and a beautiful piece ❤️
Great concept which turned into a beautiful design and a spectacular result.
Such a beautiful piece, the wood is exquisite.
Diseño muy original, ya que lo hiciste con un sólo tronco, hermoso!!!! 👏👏👏💖💖💖
Thank you!
You are the best job and thank you for sharing 💞
Beautiful!!!
All I can think of is WOW!
Отличная работа ! Тоже точу шпальтированную берёзу , из за поражения грибком она очень преображается .
Beautiful piece!! Nice job!!
Thank you Scott!
Beautiful piece 👍
Супер работа.👍
About ten years ago I gave a chunk of Osage Orange to a friend of mine who is an experienced bowl maker, and he said that as he tried trimming the piece down that small chunks flew off and left cavities that made it even harder to deal with on the second pass, so that he gave up on it. Osage Orange is the hardest wood growing in north America.But I bet if someone could make a bowl out of it that it would last for 1000 years.
Very nice!
Pretty cool :-) Nice Design and very pretty spalted wood :-) big love :-)
Thank you very much!
Superbe travail et belle réalisation
Muy lindo diseño, permite destacar las bellas líneas oscuras de la veta.
Felicitaciones!
Просто шедевр👍🏼
Good catch of the crotch lol and nice work
Awesome performance.....
Хорошая работа!
МОЛОДЕЦ!!!👍👍👍
Art.
Very nice! Thank you 🙏
Thanks for watching!
Wow, absolutely beautiful, How long was the total time in turning this piece of art ? ///// Vau, aivan kaunista, kuinka kauan tämän taideteoksen kääntämiseen kului aikaa?
hard to say. filming takes so much time along with work. Maybe it took about 15-20 hours to do this project, including editing and filming. I don't take the time though when this is just a hobby.
Sehr schön 🤩 gefällt mir sehr gut.👌
Thank you and thanks for wathcing!👍
wow, that was such a good video.. the grain on this piece is fantastic, the final shape turned out great and the finish came out great too.. but I love all that spalting and grain... thank you for sharing..
Thanks a lot!
Nice. Very nice!
Nádherná práce 👍🏻👍🏻👍🏻
Belle pièce.
Damn beautiful!
Maestro!!
Super tare 👍👍👍👍💡
Very interesting looking bowl
9:54 I was expecting blood. I actually winced when the chisel jumped forward.
Actually i scared my self in that point but no blood on sight!
Is "birch crotch" a painful condition? 😁 Seriously, I LOVE the pattern and the very unique way you used this piece of wood!
it is quite hollowed.. Thank you jim!
Question: if I put something that non-symetrical on my lathe it would wobble so terribly that it may fall over (or at least walk across the shop). How do you make it turn so true with a non-round blank?
Good question. i have lots of weight under the benchtop helping to keep lathe stable. that piece was not that non-symmetrical what it looks.
litlle bit tweaking between centers while belt is off(easy to find sweetspot when belt is off).
@@jarkko.makkonen got it. Thanks for the reply and great work!
Really nice. What finish did you use?
Thanks. Danish oi and some polishin wax.
Wow..Impressive
Nice work. How big pieces can you fit in the lathe. Never seen that brand before. And what kind of engine does it have?
Thanks! 12*36 inches or 30*90cm between centers. headstock swiveled 15 inches diameter manufacturer tells. and it have 450w motor and 3 speeds 450 950 2000 rpm. good lathe but i am dreaming to get someday bigger and more powerful lathe.
@@jarkko.makkonen my dream is a robust sweet 16. But the american doesnt know what real engines are. I want a 3phase on 400v
that would be great lathe. i have too 3phase 400v avaible if i find that kind of lathe.
Awesome project. I'm going to give you some advice even though you don't know me, and you didn't ask. Set the piece turning and then look through the camera. If it's blurry slowly change the lathe speed until it clears, this might take a few tries. If the picture is clear, it will be much more enjoyable to watch, and you will gain more subscribers. I have just subscribed to your channel, and I hope you are not offended by this comment. 😎
Thanks for commenting! this lathe have only 3 speeds 500 1000 or 2000. hard to turn slowly speed =D my camera gives me bad times or i cant use it properly. i struggle lot of with filming.but learning always something new with every project. And thanks for subscribing ill try to keep getting better videos to watch!
Beautiful
Heart shaped; fitting, she's beautiful.
A bench lathe on a wobbly bench. How tf did you turn that without the lathe turning somersaults?
lots of weights under the benchtop. I have planned to get a sturdier lathe but until then this will be enough
Great pointer at 9:25
Other videos would remove it.
This is a great reminder on how
It can grab so quickly.
Great final product. 😎🇦🇺😉
Thank you! it grabs without question!!..
Masurbjörk 👍🏼
silver birch.. there the link in video wheres the "masurbjörk" ruclips.net/video/I7EYR4T8r1I/видео.html
It is a nice piece, but think I would cut it side to side, top to bottom for two blanks. A lot of good wood was wasted. |||
Sometimes you have to sacrifice wood to make an idea come true.
Kaunista koivua, juuria sopivasti sieni värjännyt raitoja. Hieman arveluttaa itseä tuo muoto, mutta hieno kulho joka tapauksessa.
kiitos! joo hienoa puuta oli ei ollu lahonnu vielä pahasti. ensi kerralla erilaisella muotoilulla👍
@@jarkko.makkonen muotoilu on tekijän näkemys. Mielestäni aivan sama mitä mieltä muut, vaikka mainitsinkin asiasta.
Onko puutilanne helpottunut? Sorvattavaa löytyy?
aivan totta. vaa en silti kahta samanlaista tekis.
on mulla jonkun verran aihioita mut ei tietenkää ikinä liikaa oo..
hyvettiä tulee :)
👍👍👍🍻
Ohh.. Birch crotch. I read that so very wrong. hahaha.
I absolutely love that Idea of letting the crotch feature control the shape outcome. supurb Job. I just subscribed and hit like on this one.
Thank you David!
vaikuttava!
kiitos paljon!
what a waste of a beautiful piece of wood
😅
Almost got a finger
I wonder why it’s called crotch
Beautiful
I love everything about this beautiful unique looking piece great job!! And thanks for showing that towel catch, a great example to remind us to be weary of loose clothing or entangling anything like that around fingers (I can sometimes do..) when gripping to wipe etc.
I am quickly becoming more and more of a fan of birch. Just got my hands on some so looking for inspiration, THANK YOU for a great example of its potential! :)
An important safety tip for all - A cup live centre is much safer than a point centre.
Très belle réalisation bravo 👍👏
That's beautiful. I love the creativity you show in turning this piece.
Thank you Alan!
That really is a bit different.
I like watching these wood turning videos but why don't you try doing something that isn't a wooden bowl?
thanks for commenting! i will try my best to do things what no one have seen ever but it isnt easy. I have a few projects in mind as long as I find the suitable blanks.. stay tuned!
@@jarkko.makkonen How about a desk lamp? A set of chess men?
You are far more talented than I am but a bit of variety???
Cool
класс
Красиво!!!
if its balanced when it is mounted and then you cut way part of it
doesn't it get unbalanced and start shaking?
maybe the operator can suppress the unbalancing by knowing where to
cut and in which order or could you mount some kind of adjustable weights on it??
have to feel where to cut and wich order to keep plank balanced.
this plank of birch thankfully was pretty balanced start to finish ! always it is not that easy.
@@jarkko.makkonen It sounds like it is something that would not be easy
for a beginner if it was an odd shape. Probably a beginner should get some experience wood turning on more or less symmetrical pieces first.
Beautiful wood and excellent craftsmanship. Very unusual bowl. Great work 👏
That is a pretty cool treatment of a turning blank... I'll have to remember that one.
Страшно немного таким образом обрабатывать заготовку)
Отличная работа.
What a unique and interesting piece! I've never seen anything like it!
Nice piece of spalted birch. Made a beautiful bowl. 👍
Beautiful creation!
That’s different and I like different 🌞
Great piece, loved the shape. I had a hard time seeing what you were going for but turned out great. Kind of an emerging bowl. What was finish?
Thanks for commenting. danish oil and some polishing wax.
Now that's different
beautiful
A new twist on bowl design. New to me anyways. I will definitely imitate thos soon. Kudos
Thanks! I would love to see the end result of that👍
nice work what is it for now ?
just a decorative object.
That wood kinda thick
NOW!!!! PUT POPCORN IN!