Brian … I just replaced the camera on my wife’s 2014 300. Your video was incredibly helpful! The issue with her car was exactly as with yours: no guidelines in the camera view and reversed image. Again, I am very grateful for your video!
I watched Brian's video several times before doing the job. Everything went well, no surprises. Saved a few hundred bucks, took about an hour. Thank you, Sir.
Thank you so much for this video! You saved me $800 and that would not have fixed the problem! The dealership was going to put in a new radio, not a new back up camera
Thanks for the video. The dealership was going to charge me $500 to replace. Ordered off Ebay for $91. The plastic panel rivets cost $9 @ o'Reilly. *Arizona heat disclaimer * It gets so hot that the rubber gasket fused to the light. Had to pry off with screwdriver. Some small breaks in lip of light. I think it will be alright.
Thanks for the info! Dealership and a few mechanics wanted to to charge me from 900-1300$ to fix...ihad the same issue as you. Ordered a cam from eBay for $95 and installed myself🙌
Appreciate your video. So, I have a base model 2012 with 8.4 uconnect display and I want to install a backup camera. I will get a oem third brake light w/camera off of ebay. Do I need to use a Tazer to activate the backup camera function?
is there wire that goes to the radio? or do you just hook it up in back. this stereo shop wants $125.00 he said There's a wire that goes to the radio 🤔
I have the same issue with mine. Mechanic told me OEM will cost around $800 and non-OEM around $400. I think I am not gonna get it fix from them, buy from amazon or something, and do it by myself. It looks like this issue is very common and systematic. They should have recalled the camera and replace all that have this issue.
Hey mate. Thanks for the upload its really helpful.. and is it possible for u to get me the link for buying this same camera as well. Coz its being hard for me to buy online there are heaps of options, aint sure which one to go for.
you actually could have accessed the screws too the camera w/o disassembling the brake light. (right?) After 8 yrs mine just played out. Thks 4 the vid.
@@N0tY0u1 NO, my 12' Limited didn't have the seal around the trunk brake light, so that saved 5 min. LOL You have to take out brake light to get that cam out.
@@marcusmaxwell1788 okay thanks. I had ordered a replacement for my 2013 300s and the day I got it, the current one started working again so I’m gonna wait and see how long that’s going to last
I just got my back up Camera from ebay $85.00 this stereo shop wants $125.00 to put it in. I just want to know if you just take the old Camera out and put in the new one in.
@@rmoldafsky You can replace camera without removing entire housing. I just did mine. I did remove the entire trunk lid liner and got it out of the way. Easy to do. Used a small torx hand tool and was able to remove two camera screws, replace camera, and reinstall screws. Reinstalled liner. Working good so far. Installed camera 56054058AH. Camera I removed was 5605458AF. $104.00 on E-Bay. Was Quoted $495.000 from Chrysler garage. Big savings
@@dajourlivingston27 Worked for me. I just changed my front struts. 98000 mi. Car (2014 Chrysler 300) had a front end driver side rattle I just couldn't find. Checked sway bar bushings/tie rod ends, and everything else those youtube videos suggested. The answer turned out to be the front strut on driver side. Not that hard to change.
Brian I just got my back up Camera from Ebay today. This is for my Chrysler 300 base. This stereo shop wants $125.00 to put it in, it has to go to radio he said, don't you just take the old Camera out and put the new one in??
I have a 2013 chrysler 200 it has a back up camera system but the physical camera itself is missing I ask a auto repair shop how much would it cost me for them to put a back up camera on it letting them know it has a back up camera system They said $300 😆
just did everything up to the part at 3:00 Cant remove the earth (green and yellow) wire socket from its housing. Really annoying, cos it means it dangles the whole time while unmounting the camera and re-fitting the new one
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
Brian … I just replaced the camera on my wife’s 2014 300. Your video was incredibly helpful! The issue with her car was exactly as with yours: no guidelines in the camera view and reversed image. Again, I am very grateful for your video!
I'm happy it helped.
Literally the same problem I’m having thanks 💯
@@bfreeman168Thanks from Australia. Had same problems. Is only fix fitting a new camera.
I watched Brian's video several times before doing the job. Everything went well, no surprises. Saved a few hundred bucks, took about an hour. Thank you, Sir.
Glad the video helped 😊
Just did my camera on 2012 chrysler 300 thanks for video
Thank you so much for this video! You saved me $800 and that would not have fixed the problem! The dealership was going to put in a new radio, not a new back up camera
Thanks for this video. It made the job quick and simple. It took a minute to gather the tools, but your list was on point.
Thanks for the video. The dealership was going to charge me $500 to replace. Ordered off Ebay for $91. The plastic panel rivets cost $9 @ o'Reilly. *Arizona heat disclaimer * It gets so hot that the rubber gasket fused to the light. Had to pry off with screwdriver. Some small breaks in lip of light. I think it will be alright.
Bri, thanks for the video! Been wanting to do this for a while, my camera’s all dim & fuzzy. Thanks my man!
You are a blessing that is exactly what is wrong with my camera.
Thanks for the info! Dealership and a few mechanics wanted to to charge me from 900-1300$ to fix...ihad the same issue as you. Ordered a cam from eBay for $95 and installed myself🙌
Awesome!!!!
@@bfreeman168what is the cost of the camera itself?
@@kw7807 The camera will cost about 100 bucks
saved me $75 taking it to the mechanic when the camera only costed $70😂, preciate it man i just replaced my 2014 300s rear camera
Appreciate your video. So, I have a base model 2012 with 8.4 uconnect display and I want to install a backup camera. I will get a oem third brake light w/camera off of ebay. Do I need to use a Tazer to activate the backup camera function?
Very helpful, Thank you!!!
You're a professional installer, if you want to add Apple Car Play to your factory radio Thank you for the content
You saved me lots of money thank you so much!
How did you get the part? The dealer stopped making it
@@HtownRO amazon had it for 100
is there wire that goes to the radio? or do you just hook it up in back. this stereo shop wants $125.00 he said There's a wire that goes to the radio 🤔
@@lawrencerodriguez801 no just the trunk
Thank you! You’re awesome
Thank you bro
Good job bryan thank you.
Thank you for that i just got a 2012 Chrysler but my screen is blank... hopefully I can replace it myself
You can do it. The hardest part is removing those plastic clips so if you break any simply get replacements.
Thanks!!
I have the same issue with mine. Mechanic told me OEM will cost around $800 and non-OEM around $400. I think I am not gonna get it fix from them, buy from amazon or something, and do it by myself.
It looks like this issue is very common and systematic. They should have recalled the camera and replace all that have this issue.
You can do it!!!!
Hey mate. Thanks for the upload its really helpful.. and is it possible for u to get me the link for buying this same camera as well. Coz its being hard for me to buy online there are heaps of options, aint sure which one to go for.
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323651346922
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F382605505569
You da man! I'm trying this next paycheck! Lol thank you for the upload
@@bfreeman168 was your camera originally a 56054058AF and you replaced it with this 56054058AH from ebay?
@@LCB533 yes .8AH is the camera I got.
thank you
I ended up pushing the connector ends together and I haven't had any issues since a loose connection possibly could cause of alot of malfunction
How much was it?
The camera normally runs between 105 to 150. Search on Ebay
you actually could have accessed the screws too the camera w/o disassembling the brake light. (right?) After 8 yrs mine just played out. Thks 4 the vid.
Good job.
@@bfreeman168 You got it bro! Thanks, again, for the vid. I just bought off eBay (79.00)and I'll be popping it in this wknd or next week. Thks bro.
@@marcusmaxwell1788 were you able to get to the camera screws without taking out the brake light?
@@N0tY0u1 NO, my 12' Limited didn't have the seal around the trunk brake light, so that saved 5 min. LOL You have to take out brake light to get that cam out.
@@marcusmaxwell1788 okay thanks. I had ordered a replacement for my 2013 300s and the day I got it, the current one started working again so I’m gonna wait and see how long that’s going to last
Will this fix if when I put in reverse my screen goes black when I put into drive my screen is fine and all controls work ?
It's hard to say unless a diagnostic is done.
Yep will fix
Do u have the part number for camera i been looking just want to make sure i buy the right part
Unfortunately i do not have the part number. I suggest you take the Vin number to your dealership and they can provide the correct part number
Man, I’m having a really difficult time getting my new camera to plug in to the power connection. I checked and the old & new ones are identical
Try connecting the old one back in. If the old one connects then you have a bad connector on the new camera
Were do you buy the backup camera from
Amazon has em
Do it suppose to make a sound when reversing and where do I get the part from and what's it called
You can search for the backup camera on eBay or Amazon. price varies but here is the part number 56054058AH
Your camera should not be making any noise when you put the car in reverse
Does this work with replacing the whole trunk with a camera if u didn’t have a Camera already but have Uconnect?
Not sure. You can add the 3rd brake light with the camera but wiring and compatability with your system is not certain
I just got my back up Camera from ebay $85.00 this stereo shop wants $125.00 to put it in. I just want to know if you just take the old Camera out and put in the new one in.
Yes just the camera. You will need to replace
Is it possible to change the camera without removing the whole housing?
You will need to remove the housing. You will not have enough working space
@@bfreeman168 thank you.
@@rmoldafsky You can replace camera without removing entire housing. I just did mine. I did remove the entire trunk lid liner and got it out of the way. Easy to do. Used a small torx hand tool and was able to remove two camera screws, replace camera, and reinstall screws. Reinstalled liner. Working good so far. Installed camera 56054058AH. Camera I removed was 5605458AF. $104.00 on E-Bay. Was Quoted $495.000 from Chrysler garage. Big savings
@@denl1569 I hope this helps me cuz I personally don’t want to remove the entire 3rd light to get to my camera
@@dajourlivingston27
Worked for me.
I just changed my front struts. 98000 mi. Car (2014 Chrysler 300) had a front end driver side rattle I just couldn't find. Checked sway bar bushings/tie rod ends, and everything else those youtube videos suggested. The answer turned out to be the front strut on driver side. Not that hard to change.
Can you reply the part number? I have same car - thanks
I just did mines but my lines not there
Anyone know the part number?
I'm about to change mine. I don't think I have to take entire lights out... Do I?
I dont see how you can get to the camera without removing the brake light.
Does the seal just stick back on?
Yes it will seal back on. Just reapply it to the third brake light
@@bfreeman168 Thanks! I got it done. Mine's didn't have a seal however.
I have a 2011... and my problem is that the lines are crooked. So if I park using them I am always parked at a steep angle.
I would replace the camera
Brian I just got my back up Camera from Ebay today. This is for my Chrysler 300 base. This stereo shop wants $125.00 to put it in, it has to go to radio he said, don't you just take the old Camera out and put the new one in??
I have a 2013 chrysler 200 it has a back up camera system but the physical camera itself is missing
I ask a auto repair shop how much would it cost me for them to put a back up camera on it letting them know it has a back up camera system
They said $300 😆
Can you come do mine?
Lol.....it's a good feeling to do a small project like this . You got this 👍
just did everything up to the part at 3:00 Cant remove the earth (green and yellow) wire socket from its housing. Really annoying, cos it means it dangles the whole time while unmounting the camera and re-fitting the new one
I did not disconnect that connection, just let it hang and work on removing the camera. It was annoying to remove so I just worked around it
talk but did't show removal of camera tks
Simple step so no need to show how to actually unscrew the camera from the break light housing
Thank you