Making of World's Smallest working M2 Flamethrower !

I made World's Smallest working M2 Flamethrower !
#flamethrower #M2flamethrower #miniatures #diy #miniatureworld #howtomake
🔴Please consider subscribing :- / @bibinsagaram
🔴Behind the scenes, more technical information and vlog : / @bibinsagaramvlog6972
🔵Facebook :- www.facebook.c...
🔴Instagram :- / bibinsagaramyoutube
✅Link to Materials and Tools (Amazon Affiliate Links)
🔵Amazon.com
My camera
A6400 :- amzn.to/2Ks2bKl
Lens I am using
Sony E PZ 18-105mm :- amzn.to/3auKF2E
Sigma 30mm F1.4 :- amzn.to/2VP9TDM
Sigma 16mm F1.4 :- amzn.to/2XXFlSY
Tools
Cordless Drill Driver :- amzn.to/2WTfcnl
Dremel :- amzn.to/3gbuPhw
Dremel Chuck :- amzn.to/3cUE4k4
Small hacksaw :- amzn.to/36pUoqH
🔵Amazon.in
My camera
A6400 :- amzn.to/34WB8QI
Lens I am using
Sony E PZ 18-105mm :- amzn.to/3bug5rq
Sigma 30mm F1.4 :- amzn.to/34VE3JF
Sigma 16mm F1.4 :- amzn.to/3axJDCY
Tools
Cordless Drill Driver :- amzn.to/2TxJSs9
Dremel :- amzn.to/36ouGTg
Dremel Chuck :- Dremel 4486 Multi Chuck (0.4-3.4 mm)
Small hacksaw :- amzn.to/3bXUnLL
The M2 flamethrower was an American man-portable backpack flamethrower that was used in World War II. It was the successor to the M1 and M1A1 flamethrowers. Although its burn time was only around 7 seconds and the flame was only effective out to around 20-40 meters, it was still a useful weapon. However, with the arrival of flamethrower tanks, the need for flamethrower-carrying infantrymen to expose themselves to enemy fire was greatly reduced.(Source : en.wikipedia.o...)
We have three tanks on the M2 flame thrower, two fuel and one air tank. For making the tanks I am going to use 12 g CO2 capsules. They has to be cut short to make them to scale. I am used the marker pen body along with some epoxy to join back the two half's. Make sure that the material you are using to build the flamethrower is not affected by the fuel. Many organic materials will lose there strength in contact with a solvent(fuel).
Air and fuel lines for the flamethrower is made from brass and soldering is used to join them. Some of the brass tubes are salvaged from old radio antenna. Before bending the brass tubes it is annealed and filled with PLA plastic. Plastic will avoid collapsing of the pipe(For bigger pipes water is filled and freezed. Filling with wax is also an option). For soldering, parts are cleaned with sandpaper. Then solder and flux is applied followed by heating it with a butane torch. Individual joints are checked for leak.
Epoxy is used to connect air pipe and fuel pipe to the tanks.

[@nithinj1991]

Making a miniature model is tough. Making a miniature working model is even more tougher. Amazing piece of craftsmanship👌🏻

[@bibinsagaram]

Thank you so much Bro 😀

[@bibinsagaram]

Don't forget to use your headphones, I have done some experiments with sound design. If you are making one, please remember that petrol, compressed air and fire is a bad combo. Let me know your thoughts on the comments. Thankyou all for watching the video ! Please consider subscribing.

[@christnagar2012batch]

Bhumiyil ee aduthengum kandittillaatha chila pakshkalude shabdham ee vieo-yil ketto ennu oru samshayam :P
*David Attenborough calls Bibin straight away*

[@bibinsagaram]

@@christnagar2012batch 😂😂

[@taco_xd1725]

The sounds are aMazing :)

[@bibinsagaram]

@@taco_xd1725 😊 thanks

[@ARCLIGHT21]

Wow wish I could make one 😢

[@irontech8590]

Super bro

[@bibinsagaram]

Thanks Bro!

[@mrstraw153]

This guy has so much talent that is such a cool little thing that he made it's nice to know that there's still brilliant people out there

[@bibinsagaram]

Thanks a lot !

[@MrMinimum24]

Great work brother

[@bibinsagaram]

Thanks Brother :)

[@amalvijay6796]

Macha u are awesome.. what I loved the most is how u gave so much care and detailing to all the parts let it be the main tank or even the strap item u have crafted it so beautifully man.. so happy to see this.. way to go macha way to go ❤️❤️❤️❤️

[@bibinsagaram]

Thanks bro 😍👍

[@khushkarandeogun5678]

This project deserves not just million views but million likes 🥺❤️

[@bibinsagaram]

Thanks Bro !

[@MrMinimum24]

Great work man masterpiece 🔥

[@bibinsagaram]

Thanks 😊👍

[@disasterpancake9591]

I don't know how this has less than a million views. It's so cool and took so much skill

[@bibinsagaram]

🤘thanks a lot

[@josephclint9902]

Machane... ne verum poli .... onnumparayan illa.... keep going

[@bibinsagaram]

Thanks bro 😊

[@tongthongchannel8940]

Tuyệt vời pro

[@bibinsagaram]

Cảm ơn bạn rất nhiều

[@arunlaljayaraman1554]

Thats freaking awesome and an amazing craftsmanship you have there....😍😍😍

[@bibinsagaram]

Thanks 😊👍

[@claimsprocessinfo]

Amazing attention to detail. wonderful to see you work.

[@bibinsagaram]

Thanks a lot !

[@MrAbhiabhi7]

Really Cool stuff Bibin!

[@bibinsagaram]

Thanks Abhi 😊

[@TheFreak111]

Dude that thing is insane. Also quite dangerous probably, but you did a really nice job there!

[@bibinsagaram]

Thanks bro! Yes it nearly burnt my hand
ruclips.net/video/L-OCmJzcw2s/видео.html
Behind the scenes video

[@TheFreak111]

@@bibinsagaram hehehe nice. I hope it never blows up on you.

[@varunchauhan6533]

Wow nice video

[@bibinsagaram]

Thank you so much 😀

[@varunchauhan6533]

@@bibinsagaram I like that mini bottles which was filled with fuel fuel and air

[@varunchauhan6533]

@@bibinsagaram I am telling you last time please give me a number I don't know about email

[@NSDG813]

Hell yeah, USA! USA! USA! USA!

[@bibinsagaram]

✌️🇺🇸

[@PrasangSinghParihar]

Great work! 🔥

[@bibinsagaram]

Thanks 👍

[@pranavul5247]

Super Unni Chetta

[@bibinsagaram]

Thanks Pranav 😊

[@pranavul5247]

@@bibinsagaram Welcome Unni Chetta

[@pranithakrishnaraj]

A working miniature model... it's amazing. For every video you put up I say it's the best, but this one is the best of the best. Loved the videography and how you played with the audio is the background. Amazing work. 👏

[@bibinsagaram]

Thanks a lot Pranitha😊

[@thantzin-mh2zu]

This is my very like

[@bibinsagaram]

Thanks 👍

[@reoashwin816]

This is danm cool! 😃 🤩

[@bibinsagaram]

Thanks 👍😊

[@claudiopineiro3bcens100]

Excelent

[@bibinsagaram]

Thanks 😊👍

[@cring3614]

I love it

[@bibinsagaram]

Thanks a lot 😊

[@christnagar2012batch]

This is lit! Well done, man!

[@bibinsagaram]

Thanks bro 😊

[@christnagar2012batch]

@@bibinsagaram RUclips suggest cheythu njan vendum etthi :D motham kanditte ponullu :D

[@bibinsagaram]

@@christnagar2012batch thanks again Shai 😁

[@bavanrandhawa3058]

Only one word for you
Genius

[@bibinsagaram]

😊 thanks a lot

[@abhinavajith555]

Amazing work!

[@bibinsagaram]

Thanks a lot!

[@leofilarrofo9377]

Dont know why youtube recommend this but its 🔥

[@bibinsagaram]

Thanks a lot!

[@spectrumstudios4848]

Why does this video feel so soothing? Great job!!

[@bibinsagaram]

Thanks a lot 😊

[@spectrumstudios4848]

@@bibinsagaram you’re welcome

[@nimmielizabeth2188]

What an attention to detail 😎!!! The sound design is superb 💖 Especially every bit from 11:03💕 Capturing the changes in weather and also day/night shifts are really cool 👍 Well used!!

[@bibinsagaram]

😘😘😘

[@AceofKnaves1966]

That is awesome!

[@bibinsagaram]

Thanks a lot !

[@agni1]

Amazing work da

[@bibinsagaram]

Thanks 👍☺️

[@TalhaAziz-tk6oc]

Two tubes were harmed in making the video was very funny 😂😂😂

[@bibinsagaram]

Thanks!:D

[@abhinandvb7843]

Super 🔥

[@bibinsagaram]

Thanks bro 😊

[@arulanand9879]

For any great creative artist if we pose a question “What is your master creation?”. The answer will be my next one. It is very much true in your case. Your creations are getting better and better every day. Beautiful functional piece of Art. Brilliant👏👏. Icing on the cake is of course the back ground music/sound, creating the right emotions.

[@bibinsagaram]

Thanks Arul 😍😊

[@awantanying335]

Perfect

[@bibinsagaram]

Thanks brother 👍

[@shakthiprksh]

Amazing work bro. Keep posting! Got yourself a new subscriber😊

[@bibinsagaram]

Thanks bro 😊

[@chaitanyatabhane8120]

Hey, You got a new subscriber 😁

[@bibinsagaram]

Thanks for Subscribing !

[@dirtz2122]

great vid keep up the good work👍

[@bibinsagaram]

Thanks 😊

[@lionbraveking8486]

nice bro keep it up

[@bibinsagaram]

Thanks bro 😊

[@TheFireGoose]

Amazing well done, you are incredibly underrated keep up the outstanding work! :)

[@bibinsagaram]

Thanks a lot 😊

[@aswinsuseel4625]

Awesome work. Also thank you for that song at the end. 😄😄

[@bibinsagaram]

Thank a lot 👍

[@alanabraham1717]

Awesome 🔥

[@bibinsagaram]

Thanks 🔥

[@gerinyudena9195]

thx for the concept bro cuz i confused and thinking how do i make the m2 flamethrower concept and very simple,what a amazing art :)

[@bibinsagaram]

Thanks a lot

[@aswinap4022]

Bro you are a genius.👏👏👍

[@bibinsagaram]

Thanks bro 😊

[@thantzin-mh2zu]

Very GOOD

[@bibinsagaram]

Thanks 👍

[@thantzin-mh2zu]

Ok

[@aklapotherpotherpothikrebh603]

Genius man!

[@bibinsagaram]

Thanks 👍

[@aklapotherpotherpothikrebh603]

@@bibinsagaram plz start popstick aircraft #demanded

[@allseeingeye3182]

Mini flame thrower for all your bug killing needs

[@bibinsagaram]

😁

[@nadeedahsan]

OMG,, this is awesome brother.. ♥ keep doing.. and keep inspiring us

[@bibinsagaram]

Thanks bro 😊

[@memoriesjourneys]

OMG😍 Brilliant work my dear😍😍😍👌👌👌sound design was awesome 💖💕 what a feel ... especially the wind and thunder & the last scenes...♥️♥️♥️

[@bibinsagaram]

Thanks cheta 😊

[@denierdev9723]

@@bibinsagaram How is there only 7k views?

[@bibinsagaram]

@@denierdev9723 RUclips algorithm didn't started to recommend to many people. Hopefully soon 🙏

[@polarjet1833]

Holy shit dude, you are a literal genius

[@bibinsagaram]

Thanks Bro 😊

[@akhild8351]

Awesome video bro ! The attention to detail is "vere level" 👍👍

[@bibinsagaram]

Thanks bro ☺️

[@alidababu1099]

Uff! 🔥 Amazing work bro! Hats off to ur patience!

[@bibinsagaram]

Thanks Alida 😊

[@Texasmilitarydepartmentvid9654]

I'd light my Cigars with that

[@bibinsagaram]

:)

[@abhinavps6469]

It’s getting better and better. Once again amazing work brother.❣️
And that sound experiment 👌

[@bibinsagaram]

Thanks bro 😊

[@ushusunni1951]

Anna pwoli 😍😍

[@bibinsagaram]

Thanks ☺️

[@Jcknight7996]

When I see these I can't not think that its the perfect side for a mouse or small rat to use

[@bibinsagaram]

🤘

[@lovinishere]

Bibin, this is brilliant! Awesome man! Your every new videos and creations are getting better and better! The day and night bgm is just amazing! No words bro!

[@bibinsagaram]

Thanks Cheta 👍😊

[@zeeshanahmed4368]

A mini f***ing Flamethrower that actually works!! This is some crazy stuff.. Loved what you did there with the audio, treat to the ears. That shade of green made the finishing touch. And to top it off 'War' by Martin Hall. Sweet Soundtrack🔥🔥

[@bibinsagaram]

Thanks bro 😊

[@ansuyohannan]

Adipoli and new experiments....

[@bibinsagaram]

Thanks bro 😊

[@akhiljayachandran3679]

aliyoo poli. Great to see the love with which you made each part. live it😍😍

[@bibinsagaram]

Thanks bro ☺️

[@BertAndSmokey]

I can see action man will have one in the near future. 😂💯👍

[@bibinsagaram]

Thank 😊

[@gokulgs338]

Polich bro😍

[@bibinsagaram]

Thanks bro 😊

[@ARCLIGHT21]

Friend : can you give me a light
Me : sure "pulls out a literal mini flamethrower"

[@bibinsagaram]

😄

[@dr.abhiramilr2838]

It's really amazing bibin....happy to c ur creative works which needs talent, patience and passion 😍😍
In background I heard some 'thathachilachachathu' sound effect😅 !! It's cool😁.

[@bibinsagaram]

😂 Thanks Abhirami 😊

[@beckywillis9507]

I
Now I really want one cuz why wouldn’t I want a tiny flamethrower?

[@bibinsagaram]

😁

[@lifeat30y]

As always wonderful work bro. I doubt now did i learn anything from engineering in our 4 years at college :P. Anyone can make a real life size part, but scaling it down and making it work takes lot of creative effort. We all loved the way u did it. Getting better day by day :). More power to you :)

[@bibinsagaram]

Thanks a lot bhai :)

[@TheB4mvfreak]

Legit got goosebumps at the end of the video. This is so incredibly well done! 🔥

[@bibinsagaram]

Thanks man 😊

[@SICCKLE]

That's incredible man your ao creative keep the work up and you've got yourself a subscribe also don't burn your house down😉

[@bibinsagaram]

Thanks a lot ! I will 😁

[@allahgamer46]

i should do this lol, i play airsoft and have loads of umarex co2 cartridges laying around

[@bibinsagaram]

sure :)

[@game-bm1rk]

Well i luv airsoft too i have a m24 airsoft rifle

[@dheerajdilraj]

🔥🔥

[@bibinsagaram]

Thanks man 😊

[@mohitraj3585]

Dracarys 11:50

[@bibinsagaram]

😊👍

[@nightmother1]

me be like, time to go a certain somewhere

[@bibinsagaram]

✌

[@edgymushroom]

Dude your animation skills and handwork are beautufle. I'd love to chat with you (Maybe design something together!)

[@bibinsagaram]

Thanks bro, sure you can find me in Facebook and Instagram

[@onlinehelper374]

Pressure inside that cartridges is 720 PSI.

[@bibinsagaram]

👍

[@Adam-fo1bs]

To get into the smallest Pacific Pill Boxes

[@bibinsagaram]

😉🤘

[@ch-0162]

Can you do a car?

[@bibinsagaram]

sure :)

[@abialaryea5623]

I love you work, can i recommend another project. I think it would be cool u make a miniature working bazoka like the RPG 7.

[@bibinsagaram]

Thanks 😊👍

[@abialaryea5623]

@@bibinsagaram no need to thank me you deserve it bro

[@abialaryea5623]

@@bibinsagaram 👍

[@bibinsagaram]

😊

[@abialaryea5623]

@@bibinsagaram so when is your next project

[@emajelatancev7079]

My son is a big fan and he love your vides and he rely want this m2 flame thrower can you send him how to bildit pleas

[@bibinsagaram]

Thanks a lot! Please read video description!

[@Mojave_NCR_Trooper]

While this is very cool, I am concerned about the lack of a pressure relief valve

[@bibinsagaram]

Yes, that would be a good safety addition.

[@st._rman8503]

:)

[@bibinsagaram]

😀

[@arjunbs1093]

If there is a zombie apocalypse, I know whom to contact.

[@bibinsagaram]

🤣😬sure

[@game-bm1rk]

He make mini weapons 😂😂

[@bibinsagaram]

@@game-bm1rk yes 😁

[@crazymort2484]

Napalm, Vietnam theme

[@bibinsagaram]

Thought of that, but making it is illegal here.
I used gasoline.

[@crazymort2484]

@@bibinsagaram so it looks like mini napalm

[@bibinsagaram]

@@crazymort2484 yes, when scaled down viscosity of gasoline is right to mimic Napalm.

[@kiminonawa998]

Bro can u please make a camp bowie

[@bibinsagaram]

Sure 👍😊

[@akhiljayachandran3679]

how are you connecting metal pieces together? are you putting solder wire piece on it and using flame to melt it?

[@bibinsagaram]

Exactly, flux is also added

[@memefrank2119]

Bro malayali yano reply

[@bibinsagaram]

Yes!

[@memefrank2119]

@@bibinsagaram keep going bro

[@桜内さん]

🪖軍用火炎放射器🪖

[@bibinsagaram]

ありがとう

[@ekkerts1707]

Hi brother what sort of heat welding is that called

[@bibinsagaram]

Those are solder joints, brass and copper can be easily soldered. Soldering led and soldering flex is used.

[@kiminonawa998]

Plese can u make a small miniature knife and send it to me please

[@bibinsagaram]

😊

[@user2710-n3o]

Sir where to buy this and plz suggest how to code to trigger the flame

[@bibinsagaram]

Sorry, not for sale

[@mae7603]

where do you find the capsules

[@bibinsagaram]

12g CO2 Cartridge

[@christiantorok8991]

Do you happen to sell these?

[@bibinsagaram]

Sorry, I don't sell these.

[@gustavoandres8159]

What s the name of the song?

[@bibinsagaram]

"War"- Martin Hall

[@gustavoandres8159]

@@bibinsagaram thank RUclips keep up with tour excellent job..

[@bibinsagaram]

Thanks a lot 😊

[@GaryHamad]

Can I Buy This For Cockroach Extermination?

[@bibinsagaram]

Breaking News : A Guy burnt down his house to kill cockroach 😬

[@GaryHamad]

@@bibinsagaram apparently the spiders aren't doing their job effectively
I'm taking matters in my own hands lol

[@bibinsagaram]

@@GaryHamad 😁

[@ArielS12]

Super 👍👍👍👍

[@bibinsagaram]

Thanks Bro !