Im sure there was a few things you missed like the hangers grease ect but how many hours did you put in, or what would you value the labor at? Love the budget builds. A few months ago i stuck the front axle out of my Sami Under my Sidekick "SPORT" due to cv axles breaking. Im getting ready to stick some toyota BJ60 9.5 inch axles inder the sami. Want to go with air shocks but the cost of the whole link setup is a bit much when it can be done for 1/10th the cost with leafs. Anyway love the content , thanks for taking the time to explain and show all the angles.
Your right also forgot gear oil, anti freeze, brake fluid. I even had to put gas in it lol. If I was building this for a customer it would be $70 a hour. I have a lot of hours into it. I didn’t even keep track.
Let's say you sell it 5-6 k. Go and buy a side by side for that price . If it's a new one gonna be underpowered Chinese junk that breaks all time and hard find parts for if u can even find parts for. If u get sxs around 5k name brand usually getting some one else junk there tired working on. But there are good buys out there have search hard and be ready go up for sell. But back to sami 4500-6000$ all newish rebuilt drive train to run woods hunt , ride can't go wrong my opinion plus get plenty of parts. Everywhere main thing because any of um will and they will break parts here there. Run to local auto parts store or salvage yards good to go sometimes neighbors has sami part's. Do that with Amazon sxs or tractor supply sxs, even Cabela's and Lowe's stuff look good 8000-12000$ they should hard to get part's though. My zero cents n mix and yes I have 88 Sam. Love it.
Shoot lil buddy , looks good not to bad at all. If they treat roads right way and not beat us plum to death all epa rules when gov is way worse than us. and I get it polluting no good for sure You can't beat rust only cut off the cancer. And rebuild. I love my 88.5 beater mostly stock. 235/75/15 Mt thunderer trak. 50 miles on them. 40 is in dirt. Toy 3k carb new installed greasable 2" shackles. New Sony andsony kick speakers. In front new lifetime starter. And kept my core . Stock carb still back brown seat out of 94 Wrangler and new brown front seat covers Dickies brown . 5 al. 5 star Mag wheels. And buddy gave me his fox or fx shocks of his new ranger 4cl. 4wd turbo larriet XLT . Something nice package. And pretty damn fast. Told him we needed pur his old one black half back doors sane thing one notch down 2022 his grey one loaded 2023 4 full doors. Out level lift hew shocks and them only had 23k if that 21k wouldn't lot . Like put motor in ssmmy or old turbo coupe thunder chickens 83. 84 model 2300 . Or 22r toy heck iron duke it trusty 2.5. yes Sir. I like it. I like um all. Stay safe from ur ole hillbilly buddy
Lol. Don’t get me wrong I wanted to make It nice again. But not gonna put 100 of hours into a rig that will only be wheeled. An the guy who is buying it isn’t gonna pay me $100 a hour to do all that work. He wanted it cheap as possible.
Makes sense not to waste your time. The restoration of the Golden Nugget Suzuki ran over $82k. But the revenue that build brought into at least 3-4 RUclipsrs made the investment well worth it and grow their channels.
![ROSÉ(로제) - APT. (Band VER.) (With. 이영지) [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/IW8qaemx74g/mqdefault.jpg)
Very interesting,I’ll be watching what ever you do next
I would like to see an engine swap video or an engine build up video on a Samurai. That would be cool.
This was very nice! I would like to see how you make roll cage or exo
Great series- and under the 5k I would have guessed.
I got a bunch of sami s . N urs at that price looks n works well !
Nice job bud!
Love it!!! Some nice rounded rocksliders for a sami would be a nice video :)
Non rust cars are cheapest projects. Really like to see a 1.9TDI swap.
Monday I'm picking one up keep that bad boy an finish it
Im sure there was a few things you missed like the hangers grease ect but how many hours did you put in, or what would you value the labor at?
Love the budget builds. A few months ago i stuck the front axle out of my Sami Under my Sidekick "SPORT" due to cv axles breaking. Im getting ready to stick some toyota BJ60 9.5 inch axles inder the sami. Want to go with air shocks but the cost of the whole link setup is a bit much when it can be done for 1/10th the cost with leafs. Anyway love the content , thanks for taking the time to explain and show all the angles.
Yea. What about the hours of labor?
Your right also forgot gear oil, anti freeze, brake fluid. I even had to put gas in it lol.
If I was building this for a customer it would be $70 a hour. I have a lot of hours into it. I didn’t even keep track.
@@DrZFabrication what is your website to order Part’s
Put a bronco coil spring front suspension. That's what I hope to do at some point.
How much u want for it??
Nice
Yes Sir ole buddy
U build it , they will come.
Anti wrap bar build for samurai
Let's say you sell it 5-6 k. Go and buy a side by side for that price . If it's a new one gonna be underpowered Chinese junk that breaks all time and hard find parts for if u can even find parts for. If u get sxs around 5k name brand usually getting some one else junk there tired working on. But there are good buys out there have search hard and be ready go up for sell. But back to sami 4500-6000$ all newish rebuilt drive train to run woods hunt , ride can't go wrong my opinion plus get plenty of parts. Everywhere main thing because any of um will and they will break parts here there. Run to local auto parts store or salvage yards good to go sometimes neighbors has sami part's. Do that with Amazon sxs or tractor supply sxs, even Cabela's and Lowe's stuff look good 8000-12000$ they should hard to get part's though. My zero cents n mix and yes I have 88 Sam. Love it.
Tube buggy samurai build basically a sxs
Shoot lil buddy , looks good not to bad at all. If they treat roads right way and not beat us plum to death all epa rules when gov is way worse than us. and I get it polluting no good for sure
You can't beat rust only cut off the cancer. And rebuild. I love my 88.5 beater mostly stock. 235/75/15 Mt thunderer trak. 50 miles on them. 40 is in dirt. Toy 3k carb new installed greasable 2" shackles. New Sony andsony kick speakers. In front new lifetime starter. And kept my core . Stock carb still back brown seat out of 94 Wrangler and new brown front seat covers Dickies brown . 5 al. 5 star Mag wheels. And buddy gave me his fox or fx shocks of his new ranger 4cl. 4wd turbo larriet XLT . Something nice package. And pretty damn fast. Told him we needed pur his old one black half back doors sane thing one notch down 2022 his grey one loaded 2023 4 full doors. Out level lift hew shocks and them only had 23k if that 21k wouldn't lot . Like put motor in ssmmy or old turbo coupe thunder chickens 83. 84 model 2300 . Or 22r toy heck iron duke it trusty 2.5. yes Sir. I like it. I like um all. Stay safe from ur ole hillbilly buddy
Fenders butchered ….hard to watch this build for me….I guess I was expecting a “restoration” of the Suzuki instead of a demolition derby special.
Lol. Don’t get me wrong I wanted to make
It nice again. But not gonna put 100 of hours into a rig that will only be wheeled. An the guy who is buying it isn’t gonna pay me $100 a hour to do all that work. He wanted it cheap as possible.
Makes sense not to waste your time. The restoration of the Golden Nugget Suzuki ran over $82k. But the revenue that build brought into at least 3-4 RUclipsrs made the investment well worth it and grow their channels.
It's a budget build not a restoration. Awesome job. 🤘🏼