If college lecturers are not telling their students to watch these videos for on site application, there is something wrong. These videos are an apprentices dream.
Apprentice college/Tech in my day don’t teach these skills Charlie. Fantastic . Brilliant young Sir . Every day is a school day Thank you 👍keep the videos coming.
The fascia and soffit are done Charlie, that’s the finish! Why are you leaving like half brick voids? That’s a big hole the rendering crew needs to fix and it will always crack or be a problem. I’m not being a hater, just genuinely interested why you couldn’t just run the bricks in a bit further past the soffit line and avoid those holes? 06:38 You see at least 3 08:06 🤷
Привет, коллега. Хотел поинтересоваться-вы на фронтонах подпирающие столбики не вылаживаете, чтобы фронтон от ветра не завалился??а то мы выкладываем такие подпорки. Привет из России.
Been watching team Collison for a while now, great stuff Charlie 👍 One question though as I'm not a brickie.... Sometimes you furrow the bed, and sometimes you don't, does that depend on brick or is it just how you feel 🤔
I don’t furrow it because I find I get a more full bed and also quicker to spread along the wall, and can also use the excess to peep a brick which saves going back to the spot board but it’s each to there own
excuse my ignorance just a humble plumber but where did this gable transform from a cavity (this must be in roof space ) and why not use a better bond !! header stretcher in stead of going up 2 stretcher courses or is it all based on time/cost .
3 mins 14 seconds you can see it’s a double garage I’m assuming it’s a double…if there’s no cavity that normally indicates towards a garage as a house always has a cavity
@@shifty277Bon keystone forged 10 inch narrow London with plastic handle made in Slovenia by ab tokos . Bon also make 3 lines of welded trowels as well.
It’s a garage gable. Single skin once you put the lintel on a course of soldiers run one across the top and carry on up in 4 inch. The garages get boarded. But we still have to double joint which is a nightmare in summer
8:55 / 9:07 How to build gable Ends Efficiently! 🧱🚧 Charlie Collison 구독자 111만명 351 5 공유 오프라인 저장 클립 조회수 6.5천회 7시간 전 #bricklaying #bricklayer #teaching How to build gable Ends Efficiently! 🧱🚧 #bricklaying #bricklayer #teaching 댓글 30개
Хобби
If college lecturers are not telling their students to watch these videos for on site application, there is something wrong. These videos are an apprentices dream.
my college does👍
I’m a gas engineer and even I reckon I could do it now 😂
Top videos Charlie 😊
Apprentice college/Tech in my day don’t teach these skills Charlie. Fantastic . Brilliant young Sir . Every day is a school day Thank you 👍keep the videos coming.
Great video as always Charlie
im from up north its a pike txD the gabel end is the build before the pike
What's the link for the hammer 🔨 please?
The fascia and soffit are done Charlie, that’s the finish! Why are you leaving like half brick voids? That’s a big hole the rendering crew needs to fix and it will always crack or be a problem.
I’m not being a hater, just genuinely interested why you couldn’t just run the bricks in a bit further past the soffit line and avoid those holes?
06:38 You see at least 3
08:06 🤷
Lovely tip cheers
Привет, коллега. Хотел поинтересоваться-вы на фронтонах подпирающие столбики не вылаживаете, чтобы фронтон от ветра не завалился??а то мы выкладываем такие подпорки. Привет из России.
Thankyou again Charlie appreciate it as always wondered how you run a line through
glad my college shows us these videos👍
Do you find the wall to be pissed as you follow ladder/fascia board which are most of the time out of plumb quite a bit?
All the time. Just finished 3 houses so 6 gables and only 1 was bang on
@@Lee-ou6ps me gaffer used to rip the soffits off and get us to build the gable end plumb, joiners were not impressed haha
@@marceaumouchene6264 😂😂 I’m getting to that point myself
Hi Charlie, enjoy your videos but didn't you show us you doing gables before only you said you start from the middle to line the person up
I always hated doing pike's
You learn more off these video than i did at college. This looks so much easier than building small corners each side
Been watching team Collison for a while now, great stuff Charlie 👍
One question though as I'm not a brickie.... Sometimes you furrow the bed, and sometimes you don't, does that depend on brick or is it just how you feel 🤔
I don’t furrow it because I find I get a more full bed and also quicker to spread along the wall, and can also use the excess to peep a brick which saves going back to the spot board but it’s each to there own
Hello from Cincinnati Ohio
Hi Charlie, supposed to read perps
What the best brick lines to
Use ?
Why don't you pick n dip anymore?
What make of brick hammer you using there Charlie, atb mate 👍
excuse my ignorance just a humble plumber but where did this gable transform from a cavity (this must be in roof space ) and why not use a better bond !! header stretcher in stead of going up 2 stretcher courses or is it all based on time/cost .
It’s a garage.. a garage doesn’t have a cavity. He is using stretcher bond as you can see it’s half bond stick to plumbing my mate lol
does not show its a garage in vlog
regardless would a different bond be stronger @@xyieni4535
3 mins 14 seconds you can see it’s a double garage I’m assuming it’s a double…if there’s no cavity that normally indicates towards a garage as a house always has a cavity
@@xyieni4535 He asked why not use a different bond.
Question is... would you buy a new build house
no way build my own save 60k
César 🧔🏻
Почему у тебя всегда разные кельмы
Hey Charlie I have a good way for you to build those gables. Would you like me to do a video on my channel explaining?
What trowel you using mate?
Bon
It looks like maybe a 10" bon wide London?
@@shifty277Bon keystone forged 10 inch narrow London with plastic handle made in Slovenia by ab tokos . Bon also make 3 lines of welded trowels as well.
What happened to the cavity and no wall ties?
It’s a garage gable.
Single skin once you put the lintel on a course of soldiers run one across the top and carry on up in 4 inch.
The garages get boarded. But we still have to double joint which is a nightmare in summer
@@imdaprophet Now I get it.
8:55 / 9:07
How to build gable Ends Efficiently! 🧱🚧
Charlie Collison
구독자 111만명
351
5
공유
오프라인 저장
클립
조회수 6.5천회 7시간 전 #bricklaying #bricklayer #teaching
How to build gable Ends Efficiently! 🧱🚧 #bricklaying #bricklayer #teaching
댓글 30개
Good stuff Charlie god I hate gables
Your doing that wrong mate
Eat videos man