Why make it so underpowered? I run 3.5t 273 v3 on my stealth frame using a 20s20p 60Ah pack w/ an unlocked svmc72200 doing 30kW peak power, its definitely the fastest 'ebike' at that point. You should hit up Amorge battery to sell u a pack for the stealth, they do 72v 38Ah w/ 200A cont & 300A peak for $900.
@@jose-emanuelgoossens3050 Amorge works directly with Molicel, Samsung and Lishen factories in China. They are well known in the DIY world for their best value packs.
I was about to recommend amorge as well I can see I was beat to it. I still hate nbpower till this day for that garbage battery they sold me at $1600. You know the battery Allen at amorge will set you up with at or less than that price, You’ll be pulling at least 500amps for that price.
Edit: I saw the pinned comment but I'll leave the question here lol. What controller do you have for your QS205 motor? My bike will come with a 80A controller because I heard that a 150A could be damaging for a 5000w motor. What's the top speed you'll think I can get with 80A
Another great video brother, i got some coming but not that goid of ones. But im 6 2 250. I hit 65mph all the time would go faster but runs out of room. You have to remember weieght difference between 205 and 273 is bid. My bike weighs 190lbs. 205 will get you there quicker but 273 does not ever overheat like 205. Also top end way better. But with some programmimg and field weakening. Its way more piwerful and meant for high speeds 205 has more torque stock but less speed. I will never use a 205 again unless i want offroad. But my bike is for my daily driver for work and travel
What in the delusional world are you talking about? Torque and acceleration? Bruddah the more length the magnets have the more torque the motor can produce. QS273 is the largest and fastest 'ebike' motor. People use it with nd96850 @850 phase amps. I doubt a qs205 can even handle 500 phase amps. The Torque at the wheel when actually using the motor to its best ability is way better on the qs273. A good set of hubsinks and ferrofluid and u can run a 961200 on that beast as long as you told the motor seller to send you the upgraded phase wires.
@SRN AR8 THATS WHAT I SAID. Read before you make idiotic comment. That's what 273 weights twice as much. 205bis for torque andv273bis for speed these are facts. Why don't you actually no something about math. A 273 Will not beat a 205 off line. Unless 273 has major field weakening and or a 5t but no top end like a 2.5t. 65mph stock, with a big ass like mine 6 2 250. First bike ever to handle me but it's still way to low. And I got a 21" turtle tires(outside diameter is 27.5.)
I haven’t wheelies a pedal bike in a long time. But I assume it’s similar because it’s really just about finding and holding your balance point. And when the bike does the work for you it’s easier to do.
hi mate great video. just some questions if that's ok.. I'm running a 15000wat 72v 60amp with a sabvoton 150amp and a QS273 2.5T.. I'm looking at getting abit more low end acceleration.. also. is there any upgraded controller that would work with my set up? e.g like a bigger amp and better quality.. aswell is there any videos you have to help setup a sab150amp with a 15000wat motor please. like parameters.. appreciate it mate
You have plenty of power, your motor is probably limiting your low end acceleration. The motor's T rating is like a gear ratio on a gas bike, where the higher the number the more torque the motor will have, but the less top speed. If you switched to a 3.5T motor you would have more low end torque. I'm planning on building a bike with a 5T motor because I want as much torque as possible, and I don't mind having a lower top speed.
@@Calthecool hi thanks for your reply much appreciated.. after looking. I have a sabvoton 200amp installed. for some reason I thought it was 150amp.. right I understand with the motor rating. like 3.5 and 5t ect.. I may look into getting a 3.5t 🤟.. with the low end acceleration. there's a menu you can change in the mqcon app. should I rise that up a few % and see if that helps or would that ruin it?. sorry for the noob questions but appreciate your reply and help.. yeah I bet that 5t would be crazy on the start haha. looking forward to seeing that if you put it on your channel.. cheers mate any help is welcomed haha.. thanks 😊
@@clungechewerGM I'm actually about to buy the parts to build my first bomber ebike, so I'm still a noob also and I haven't used the app yet. I'm going to be making a few videos about the bike, once the bike is working I'll make a video going into the app's settings and seeing what they all do, as I love to mess around with stuff like that. As far as the motor goes, from my research and past knowledge with brushless motors it really depends on how you are going to be riding the bike. For me, I'm just using it to have fun with, not as an actual commuter bike. With a 5T I should have a bunch of torque for ripping off-road with a top speed of about 45mph, which is plenty fast for me to get around town. If I were you I would research the top speed of each T value, and choose the one that matches how you plan on riding. From this video, it looks like 3.5T with 12kW goes around 65mph, so if you think that's fast enough for you then I would go with that.
@@Calthecool I will keep a look out for them videos will be good to see what you do with it 🤟. I appreciate your help I'm going to do a bit more research on the T ratings and see what I can plan out.. appreciate that mate. and keep up the good videos. very helpful 👌
So I'm doing an almost identical build based on your initial build and what you've learned. I even ordered the same battery from NB Power (72V 40ah) and 150A controller/ BMS to power the qs205 3.5T. Did you add ferrofluid, and do you experience any heat issues pushing 12KW? That's my main concern being in Texas. Thanks and love how helpful the content has been! I can't wait to start this project
Hey do u recommend this bike for the long run and enduro stuff? I’ve seen videos where people get bad wheel problems where it’s not centered and much more problems. I’m planning on getting one with 12k watt motor 72v 52.5ah
NOT an eBike. It is an eMXC. Stop calling it an eBike, if means us ACTUAL eBikers can't get access to trails because people are afraid of exactly this on Multi-Use Trails. ALL eBikes are restricted to below 30MPH. Chipping it, or native, over that and you have an eMXC.
@@ENDOPRYSMofficial to be fair....went from an x-class 48v with a massive chainring...to 12kw...lol it's not a bike. I can't pedal at speed...have to remember to be nice to cars....gonna get it tagged and remove the pedals. It's quiet, fast and stealthy as hell. I went 2.5t and it's faster than I'm comfortable with...keep up the videos. You and a few others are why I got into this - and - I'm happy I did. Daily commute that I can charge at work as opposed to 14mpg truck...keep up the good work.
The bike is 72v 12,000 watts
The motor is 3.5t
And the wheels are 19 inch rims.
Controller is a sabvaton 72150
And the battery is a 72v 40ah
Why make it so underpowered? I run 3.5t 273 v3 on my stealth frame using a 20s20p 60Ah pack w/ an unlocked svmc72200 doing 30kW peak power, its definitely the fastest 'ebike' at that point. You should hit up Amorge battery to sell u a pack for the stealth, they do 72v 38Ah w/ 200A cont & 300A peak for $900.
@@SRNAR8 so cheap battery
@@jose-emanuelgoossens3050 Amorge works directly with Molicel, Samsung and Lishen factories in China. They are well known in the DIY world for their best value packs.
I was about to recommend amorge as well I can see I was beat to it. I still hate nbpower till this day for that garbage battery they sold me at $1600. You know the battery Allen at amorge will set you up with at or less than that price, You’ll be pulling at least 500amps for that price.
@@SRNAR8 good to know
Lets goo baby! We need this shit
Cool video man, and that bike is a monster!
Maybe make a video about that drone?
It’s a chi mini 3 pro. I’ll probably do a review of it soon. It makes filming so much easier.
Thanks for the video. Tons of actual action. Thanks 💪
Love the bike bro . Been following for a bit, was wondering do you have the rear brakes on the left side?
very good test. No paper fold no thumps up.
I like the B-52 the best because they have pedals looks more like an e-bike
normally this bike comes with pedals he just removed em.
Who do you recommend that I buy a bomber from?
Edit: I saw the pinned comment but I'll leave the question here lol.
What controller do you have for your QS205 motor? My bike will come with a 80A controller because I heard that a 150A could be damaging for a 5000w motor. What's the top speed you'll think I can get with 80A
Probably like 45-50. Although that’s just a guess.
@@ENDOPRYSMofficial nice, i was worried that it wouldn't keep up but 45-50 is good to know
Another great video brother, i got some coming but not that goid of ones. But im 6 2 250. I hit 65mph all the time would go faster but runs out of room. You have to remember weieght difference between 205 and 273 is bid. My bike weighs 190lbs. 205 will get you there quicker but 273 does not ever overheat like 205. Also top end way better. But with some programmimg and field weakening. Its way more piwerful and meant for high speeds 205 has more torque stock but less speed. I will never use a 205 again unless i want offroad. But my bike is for my daily driver for work and travel
What in the delusional world are you talking about? Torque and acceleration? Bruddah the more length the magnets have the more torque the motor can produce. QS273 is the largest and fastest 'ebike' motor. People use it with nd96850 @850 phase amps. I doubt a qs205 can even handle 500 phase amps. The Torque at the wheel when actually using the motor to its best ability is way better on the qs273. A good set of hubsinks and ferrofluid and u can run a 961200 on that beast as long as you told the motor seller to send you the upgraded phase wires.
@SRN AR8 THATS WHAT I SAID. Read before you make idiotic comment. That's what 273 weights twice as much. 205bis for torque andv273bis for speed these are facts. Why don't you actually no something about math. A 273 Will not beat a 205 off line. Unless 273 has major field weakening and or a 5t but no top end like a 2.5t. 65mph stock, with a big ass like mine 6 2 250. First bike ever to handle me but it's still way to low. And I got a 21" turtle tires(outside diameter is 27.5.)
Love this bike👍👍💯⚡⚡
What made u put the QS273 back on ? I ordered that motor but I paired it with a 72/200
I’ll make a vid on it
I know you can put pedals on the suron.
Does the wheelies feel similar to a pedal bike wheelie? Cause I’m getting one and can wheelie a peddle bike.
I haven’t wheelies a pedal bike in a long time. But I assume it’s similar because it’s really just about finding and holding your balance point. And when the bike does the work for you it’s easier to do.
How many amps you putting out?
are these steet legal if so how do you regester them since they dont have a vin or title?
hi mate great video. just some questions if that's ok..
I'm running a 15000wat 72v 60amp with a sabvoton 150amp and a QS273 2.5T.. I'm looking at getting abit more low end acceleration..
also. is there any upgraded controller that would work with my set up? e.g like a bigger amp and better quality..
aswell is there any videos you have to help setup a sab150amp with a 15000wat motor please. like parameters..
appreciate it mate
You have plenty of power, your motor is probably limiting your low end acceleration. The motor's T rating is like a gear ratio on a gas bike, where the higher the number the more torque the motor will have, but the less top speed. If you switched to a 3.5T motor you would have more low end torque. I'm planning on building a bike with a 5T motor because I want as much torque as possible, and I don't mind having a lower top speed.
@@Calthecool hi thanks for your reply much appreciated.. after looking. I have a sabvoton 200amp installed. for some reason I thought it was 150amp.. right I understand with the motor rating. like 3.5 and 5t ect.. I may look into getting a 3.5t 🤟.. with the low end acceleration. there's a menu you can change in the mqcon app. should I rise that up a few % and see if that helps or would that ruin it?. sorry for the noob questions but appreciate your reply and help.. yeah I bet that 5t would be crazy on the start haha. looking forward to seeing that if you put it on your channel.. cheers mate any help is welcomed haha.. thanks 😊
@@clungechewerGM
I'm actually about to buy the parts to build my first bomber ebike, so I'm still a noob also and I haven't used the app yet. I'm going to be making a few videos about the bike, once the bike is working I'll make a video going into the app's settings and seeing what they all do, as I love to mess around with stuff like that.
As far as the motor goes, from my research and past knowledge with brushless motors it really depends on how you are going to be riding the bike. For me, I'm just using it to have fun with, not as an actual commuter bike. With a 5T I should have a bunch of torque for ripping off-road with a top speed of about 45mph, which is plenty fast for me to get around town. If I were you I would research the top speed of each T value, and choose the one that matches how you plan on riding. From this video, it looks like 3.5T with 12kW goes around 65mph, so if you think that's fast enough for you then I would go with that.
@@Calthecool I will keep a look out for them videos will be good to see what you do with it 🤟. I appreciate your help I'm going to do a bit more research on the T ratings and see what I can plan out.. appreciate that mate. and keep up the good videos. very helpful 👌
Does this bike handle well steep climb ?
So I'm doing an almost identical build based on your initial build and what you've learned. I even ordered the same battery from NB Power (72V 40ah) and 150A controller/ BMS to power the qs205 3.5T. Did you add ferrofluid, and do you experience any heat issues pushing 12KW? That's my main concern being in Texas. Thanks and love how helpful the content has been! I can't wait to start this project
can you do a dirt road/offroad test? on high slope, long slope, rocky road etc?
Shure
Get Larry the Enticer to jump it!!!!
You are missing a bolt on the top shock clamp
Hey do u recommend this bike for the long run and enduro stuff?
I’ve seen videos where people get bad wheel problems where it’s not centered and much more problems.
I’m planning on getting one with 12k watt motor 72v 52.5ah
got any links to the bike or was it all.pieced together
🚴♀️⚡️🚀🎖🔥❤️
I need an e bike so badly 😭😭😭
What do you have for your controller motor and battery?
I need to learn wheelies 💀
Are all bikes differant cause Danm 12,000 watts for me is slow as shit
Why did you change the qs205 for the qs273? Did you have heat problems?
I’ll make a vid on why I did it soon.
Who did you buy your battery from?
But the fact that you didn't evenly fold the paper... 😆
😂
Bro... your making my Sur-Ron seem slow
😂 yo message me on instagram @endoprysm I’m down to Cruz with you.
yo i need help with mine
No I just checked it's 15000 w that goes 75 mph 5,099 bucks
install the moto fork and brakes
With the power you have, you should do 0-60 in 7seconds or less.
I want the 15,000 watt get a gel seat cover, one that goes on a Harley-Davidson it's way better thank me later
The 12,000 watt goes 75 mph so it says
Those bikes are quiet
That’s impressive
flux on and test max speed
NOT an eBike. It is an eMXC.
Stop calling it an eBike, if means us ACTUAL eBikers can't get access to trails because people are afraid of exactly this on Multi-Use Trails.
ALL eBikes are restricted to below 30MPH. Chipping it, or native, over that and you have an eMXC.
🤓
@@ENDOPRYSMofficial to be fair....went from an x-class 48v with a massive chainring...to 12kw...lol it's not a bike. I can't pedal at speed...have to remember to be nice to cars....gonna get it tagged and remove the pedals. It's quiet, fast and stealthy as hell. I went 2.5t and it's faster than I'm comfortable with...keep up the videos. You and a few others are why I got into this - and - I'm happy I did. Daily commute that I can charge at work as opposed to 14mpg truck...keep up the good work.
Hello friend, what inch are your tires front and back, pls lmk, mines currently on the ship, with 12kw 2.5T same as yours @@user-ou1ym5ts1d