Installing a Smart Start System on my Nissan Navara NP300 Calibre EL (PART 1)
HTML-код
- Опубликовано: 17 сен 2021
- Installing a Smart Start System on my Nissan Navara NP300 Calibre EL (PART 1)
This is the link for the Smart Start System :
s.lazada.com.ph/s.WFh6j
This is the link for the flip key case conversion :
• FLIP KEY CONVERTION FO...
This is the link for the crimp and T-taps connectors:
s.lazada.com.ph/s.WFh8R
s.lazada.com.ph/s.WF5Yx
Hello! I'm Joey. In this video, I will show you how I installed a smart start system on my Nissan Navara NP300 Calibre EL. Part 1 will concentrate on installing and wiring the smart start system or the push start system. And Part 2, since I will not be bypassing the immobilizer, it will concentrate on relocating/extending the immobilizer coil, as well as fabricating a pouch which will serve as a new location for the extended/relocated immobilizer coil. Part 2 of the installation will be uploaded same time and day next week.
If you liked this video, please give it a thumbs up and hit the share button. Also, if you would love to see more videos like this, subscribe to my channel and click the notification bell to be updated on my next videos.
Feel free to comment on what videos you'd like to see next!
For business inquiries, send an email to: joeysdiyvlogs@gmail.com
Follow me on Facebook: / joeysdiyvlogs Авто/Мото
Your video is the best I came across while trying to figure this out! Thank you so much!🎉❤
Best video I've seen yet, thank you so much for the upload.
Thank you for watching.
Well done brother Joey. That plug and play application is great, no splicing of factory harness. If i get my hands on a socket i may attempt this. Keep up the great work. GOD BLESS!!!
Thank you and God Bless!
Grabe boss nkapa linaw ang galing ❤
Maraming salamat po.
Galing and detailed. Waiting for the 2nd part. Thanks sir.
Thank you for watching. God Bless!
Nice 1 sir Joey, thank you sa very informative na video... 👍👍👍
Thank you din po and God Bless!
Thank you so much for making this video paps. Very detailed and clear po ang pagkaka.explain kung paano hanapin ang IG1 and IG2...dito ko naintindihan ng mabuti ang kaibahan ng dalawa. More power to you. God bless
Napaka galing sir! From carwash to installig a smart ignition. Napakarami nyo pong nagagawa para matulungan kami sa pag DIY. Thank you sir and always stay safe! Di ko narealize na ganito lang pala kadali mag install ng ganyan 👍
Thank you sir for watching. Yan po ang main reason kung bakit ako nag create ng youtube channel, to be able to share my car Diys at masaya po akong nakakatulong ang mga videos ko sa inyo. Maraming salamat di po at God Bless!
Wow! Super galing nyo po sir joey. Glory to God.
Thank you po and God Bless!
Thank for your best explaination
Congrats sir another masterpiece👏
Thank you Sir. God Bless!
Maraming maraming salamat po sa informative niyong video tutorial.
Thank you for watching. Salamat din sa pagsupport sa aking channel, God Bless po!
Another good job sir Joey! Madali lang sundan, sadyang dyan pala talaga nilalagay ang PSB kinapa ko yung navara ko may bilog na na abang para butasan👍👌❤️👊🏻
Yes sir dyan talaga ang original location nya, wait nyo sa next sunday sept. 26 ang part2 ng video mas interesting kasi instead na immobilizer bypass eh immobilizer extension ang gagawin ko para active pa rin ito sa navara. Thank you and God Bless!
Anlupeeeet mo talaga sir Joey's . Taba tlga ng utak mo . Patuloy sa pag vlog sir about navara upgrade .
Thank you sir, God Bless!
Good day sir, sana gawa ka din ng video regarding automatic fold and unfold side mirror for navara using remote control key. Slamat and more videos to come.
Sir Joey,thank you.
Thank you po and God Bless!
Good job bro. 👌
salamat kuya sobrang linaw sana gawa ka rin para sa vios gen 3
Thank you for watching. Same lang po ang wiring ng mga ignition kaya madali nyo ito masundan sa vios nyo.
Joey good job, the installation is very clear to understand the best part is without damage or compromise the original security system, I am waiting for the second part to see how you will manage the RFID token and the factory immobilizer. 👏🏼👏🏼
Thank you Hector. The part 2 will be available on youtube on sept 26.
Another smart upgrade.
Thank you sir.
Galing sir 👍
Maraming salamat po at God Bless!
napakadali gawin sir pag ikaw nag explain.. thanks
Maraming salamat Marlon palagi kayo naka support sa aking YTChannel God Bless!
@@joeysd.i.y nako wala pa po yan. may mga naeencounter ako sa GC ng wigo sa facebook.. mga nagtatanong, palage ko rin sinasabi na isearch kayo sa youtube.
@@joeysd.i.y dko lang po alam kung nakakausap nyo po sila..
@@marlonlegaspi6366 pasensya na late reply ngayon ko lang ulit naopen youtube ko. Maraming nag tatanong sa akin sa comment section ng video at pati na rin sa messenger malamang yung mga sinabihan mo isa na sila doon.
Excellent Boss..
Thank you for watching and God Bless!
Nice sir. Good sharing
Thank you and God Bless!
Thanks brother!
Welcome!
Nice one sir Joey very much helpful... pwede kaya yan sa manual transmission sir Joey
Yes sir pwede
Can you make a video on how to connect door lock, unlock, trunk release for the keyless alarm system?
I'm trying to install in a 2009 Hyundai i10 but can't. I have a fixed 12V on two pins, what should be connected there?
Ang galing Ka Joey!!! Looking forward sa part2 ng video!!!
Ka Joey, tanong ko lang, momentary lang ba yung pag push nung button para mag start o need i hold hanggang hindi nag start ang engine?
Thank you for watching. Yes po need na tagalan ng konti ang pag pindot. Wait nyo po yung part2 ng video sa next sunday kasi naexplain ko po yan doon.
Nice videos boss.
Thank you for watching.
hello, I'm installing, I'm writing start, I have the same cables red+, black -, brown IG2, BlueACC, white IG1 and yellow start, but I have 5 cables on the switch box (jeep) and only three of them are "functional" 1 +, 2 start, 3 on, position acc and IG2 is not there !! can I connect it so that I put the blue cable directly on cable 3, the brown one on the blue one and finally the brown one on the white one? when I connected it like that, the button worked almost as it should. the car starts and turns off, I still have to solve the immobilizer
good day sir, im planning to DIY my glx ertiga, naka push start stock na po cya planning to upgrade it to pke remote start
helpful po ingat
Thank you and God Bless!
where you add ground ? I had issue with ground in 2013 Camry SE.
How will door lock and unlock will work.where are the wires connected
Sir magandang araw po.. may tanong po ako about sa avanza 2016 ko.. same po kasi ang black at brown wire umi ilaw kahit di pa nka susi. Same din hindi na mamatay ang ilaw during crank at pag on na ng engine..
Na lilito ako san dun ang contant positive dun.. thanks po sir
Sir pwdi Po ba magtanong kung pwdi Po ba sa matic trans na may d hater Ang makina..?
hello again Joey. nice work. in a standart gearbox what do i do with the key. do i leave it in the ignition?
You have the option to cut the key ang leave it inside or pull out the ignition barrel. Both will make your steering wheel free and unlocked.
Great knowledge to learn. thanks for this video. Applicable po b to s Manual EL Sir?
Thank you for watching. Yes po
ung auto q na honda city lock,1,2,3 agad ung ignition niya walang on paanu kaya un sir?
Sir magagawa p b yun rfid tag? Ayaw n Po gumana yun rfid tag ko po
hi Joey. i love your videos.
can you give me some advice i can purchase the pke push to start kit. i wanted to know if you know on the navara np300 where to splice the wire for lock and unlock and also perhaps the windows. thnks joeys
Thanks for watching. I only installed a simple smart start system so I dont know exactly, try the harness on the driver side or lower left side. Use a multitester or light tester to check which wires are for the door lock and unlock.
Sir tanong po pano kung disconnect na po ung ignition 1 or 2 anu po ang gagawin parq mapagana mo ung push start
Bossing powde po paki describe paano mag sntall ng remote at start @ off?
Sir panu po yung ig1 at ig2 parehas lang po nailaw kapag inistart ko diko tuloy malaman kung alin jan
Magandang gabi sir,tanong ko lang po sana paano kung dalawa ang imiilaw kapag naka ACC yjng key paano po malaman yung ACC lang talaga
If it's too hard for me to reach the brake wire upfront, can I run a wire from the rear brake light?
Yes you can do that.
Boss pwede ba e dual function? Pwede e pushstart tapos pwede din sa susian?
Nag kabit ako nyan maganda turo ni sir kaso sakin mabilis masira 😂😂😂
Sir Joey san ka nakabili yung cover ng guage cluster mo (carbon fiber look)? thanks
Vinly carbon fiber wrap lang po ito nabili ko sa lazada mahirap lang ikabit ilang beses akong nagkamali hehe!
Gawa ka dn boss ng video para sa remote key start El or VL
Thank you for watching. Sige po try ko po gawin sa wigo, add ko na po ito sa future contents natin. Thank you and God Bless!
Sir. kamusta naman after 2 years? working parin po ba?
What brand headunit/stereo do you have????
Thank you for watching. The brand of the 10inches android headunit is Seicane, I bought it online. This is the link if you want to check more about it.
s.lazada.com.ph/s.bAv5L
Gaano ka reliable sir yang ganyang acceaories? Di kaya biglang mag off ang sasakyan habang tumatakbo kapag nag malfunction?
ser joey. saan makakabili ng push start at magkano?
saan po nabibili ang smart system?
Sir idol.. baka pwede mu akong gawan para sa hiace gl 2007 kase 7 po ang wire niya.. salamat po idol.
Thank you for watching. 5 wires lang po ang gagamitin mo since 6 wires lang ang nasa smart start system at yung lang pong 5 wire na tinuro ko sa video ang ikakabit nyo. Gamitan nyo ng light tester to determine the wires.
Kuya joey ano pinanggamit mong pang butas for the switch?
Sir nabili ko ito ng set sa ace hardware. Check mo sa lazada or shoppee hole saw drill kit para magka idea ka.
hello po sir tanong q lang po ung sa brake portion ung brown wire po ba is para sa clutch if meron??
Parang wala ata function kasi sa manual hindi ito naka label at ang nakalagay lang ay (NO FUNCTION)
Pano pag nagkapalit ignition 1 at 2 ano po mangyayari
Thank you for watching. Hindi lang po magstart.
Hello po mag install po ako nito this Saturday. Ask ko po ins Pwede parin magamit gyud Key Ignition just incase ma sira ang Push start button syste?
Thank you for watching. Sorry late ko na nabasa ito. Pag nag install kayo nito kailangan tanggalin ang socket ng wire para sa ignition barrel same ng ginawa ko sa video so if ever magka problem ang smart stop need lang ibalik ang socket sa ignition barrel at idiaconnect naman ang socket ng smart start system then pwede na ulit magstart gamit ang physical key.
Paano po Sir ayusin yung manibela para hindi po mag lock kapag ininstall po yung push stary
Sir watch mo yung part2 ng video kung saan nag insert ako ng duplicate key at nag relocate din ako ng immobilizer
good video.. pero sir ask q lng.. wala b masi2ra sa ecu or sa mga electrical components ng sak2yan if mgpalagay ng push start sa katagalan?.. im planning din po kc mgpalagay..
Thank you for watching. Wala pong akong ginalaw sa ecu kahit po ang immobilizer hindi ako nag bypas so literally yung mechanical ignition barrel lang ang binago ko pinalitan lng ng push start system in which same lang po ito ng function sa ignition barrel, kung baga naging high tech lang po.
@@joeysd.i.y ah ok po sir joey.. big help..godbless
paano po kaya kapag lalagyan din ng timer para sa turbo?
Thank you for watching. Hindi pa po ako naka paglagay ng turbo timer kaya wala pa akong idea doon. Pero magandang upgrade po iyan sa mga naka turbo diesel
Sir pwede po bang break and start button agad direct para mag start? Or need pa mag pindot 3 times para mag start?
Thank you for watching opo pwedeng press brake then push start button mag start po ang engine.
When i can watch part 2?
This coming sunday Sept. 26 at 6 a.m.
hi po sir joey ano pong tawag dyan sa tester na parang screwdriver po?
Light tester po pero gawa ko lang iyan. May mabibili kayo nito sa lazada or shoppee search nyo lang ang light tester.
@@joeysd.i.y thank you po sir joey
Idol d ba kumplikado yung sa brake switch ikabit don sa brake pedal ang sakin kc apakan muna ang clutch pedal bago umandar pag kinabit ko ba sya sa brake pedal d ba maapektuhan yung sa clutch pedal ko.need ba tlga don sa brake pedal ikabit?slmt sa reply
Actually sir baka pwede nyo naman ilipat iyon at isabay sa clutch para isang tapak nalang kayo need lang naman po ng wire na ito ng mag karoon ng supply na 12volts para mag start at mag turn off.
Slmt idol sa info..god bless po
Gumana ito kahit walang immobilizer yung kotse?
Pwede po idisable yung immobilizer
Bypass na po ba nya ang immobilizer ng original na susi?
No hindi po functional pa rin ang immobilizer
pwde po ba hindi na po lagyan ng rfid sensor sir? para deresto na po start. salamat po
Thank you for watching. Pwede po may nabibiling push start system na walang rfid pero yung sa ikinabit ko pwede rin idisable ang rfid kung ayaw nyo ng feature na ito.
@@joeysd.i.y paano po e disable ang rfid sir??
@@joeysd.i.y😊
Boss papano un susi
Thank you for watching. Wait nyo po ang part 2 ng video this coming sunday Sept 26. Explain ko po doon kung paano irelocate or iextend ang immobilizer coil.
hello po sir baka na try nyong nagkabit ng push start button with remote start paano e troubleshoot,,why is it if i remote start my vehicle the car will start but the starter keeps on starting even thow the car has already started?
Hindi pa po ako nakapag install ng remote start pero sa tingin ko may mali kayong connection kaya mas magandang ireview nyo ulit lahat ng wirings check nyo maigi sa wiring diagram ng remote start.
salamat po sa information sir
Hello po. Mostly pke keyless entry meron po syang wire ss wiring harness na kailangan e connect mo sa oil pump detection line. Kasi po pag hindi ito na econnect sa oil pump line, gumagana parin ang starter kahit umaandar na ang makina. Kung di po nyo ma.locate ang oil pump detection line, pwede na rin po e connect sa constant 12 volts line.
ok po salamat sa info
di napo ba kailangan ng susi yan?
Thank you for watching wait nyo po sa sunday sept26 ang 2nd part ng video, nag relocate po ako ng immobilizer kaya hindi ko na po kailangan ng key. But still need ko parin ang keyfob since nandoon ang microchip more explanations po sa video. Thank you and God Bless!
How much price
I paid 728 + 129 php on lazada last month.
Sir pahingi naman ng link or details ng harness/connector na sinabi nyo nabili nyo sa hardware. Para nga wala ng splicing pang gagawin. Salamat
Sir sa autosupply ka bumili sabihin mo lang 6pin na socket. Alam ko isang design lang ito madalas itong ginagamit sa voltage regulator ng mga lumang sasakyan. Tapos para pumasok sa navara pansinin mo sa video yung binili kong 6pin socket pinutol ko yung lock sa ibabaw.
@@joeysd.i.y ah ok po. Salamat..
sir pde kaya un 6pin socket sa 07 honda crv.. compatible kaya..
Location Nyo sir
Boss baka pwedeng kabitan mo din ako? May kit na po ako ikakabit nalang willing po ako pumunta sa shop mo boss
Message mo po ako sa fb page Joey"sDiy para makapagusap tayo.
Gusto mo bang magtrabaho sa Saudi Arabia kapatid mangyaring makipag-ugnay sa akin
Pag ako nag wiring niyan.
Hindi na yan mag start. 😅
Thank you po for watching and God Bless!
Pwde ba sa manual to?
Pano pag nagkapalit ignition 1 at 2 ano po mangyayari
Hindi po mag start
Salamat po sir joey