This what after sales service should be.all gun manufacturers should come closer to the end users and listen to their needs and utilize available tools to communicate with them. A great video Ed and please keep up your intelligent and distinguished ideas and inventions. Wish you all the best.
Ed this is why your a genius in my eyes and that is why your Edguns cost what they do and I have no problam paying what there worth and that is why I own 3 of them because I love them all. Thankbhou
Just stumbled onto this one. Finally, I don't have to use Google translate for your videos. Thank you so much for taking the time in making this one in English. Hope you make more.
Ed so I have a new standard. I have about 500 shots in the gun and it has lost some meters per second. Should I adjust the hammer spring or the regulator?
Hi Ed, could you please pass all the measures used in the Matador Orig? Particularly I need measurement oring that is on the brass ring in the barrel, but I think it would be useful to have measures of the rest Thanks for everything Tere Ed, kas te võiksite läbida kõik meetmed, mida kasutatakse Matador Orig? Eriti vajan mõõtmine Öring mis on messingist sõrmus barrel, kuid ma arvan, et oleks kasulik omada meetmete ülejäänud Aitäh kõige eest
Hi Ed. That valve stem that is partially plastic,Do you have plans to make it all metal ? You mentioned yourself if it is broken just order a new one.I hear they brake often 5-6000 shots on .25cal & up to 1000 shots on .30cal. This is the only reason I have not bought this gun yet.
The metal valve is too heavy and increase the time of opening the valve, thus increase the air consumption.The valve itself cost only 15 euro, so replace it is a 15 minutes work. If you have warranty you will get it for free. In .30 we will make the metal ones as the air consumption is not the critical point at this caliber already. In .22 and .25 we changed the design of the valve and I hope it will las much longer now.
thanks for an english version ed and the simple instruction, may i ask did you ever make the multi shot replacement for the matador r2 that i have many thanks ...del
I have only KITs for Matador R3 now, the only difference is the way of barrel fixing. So, one can cut the part of the front breech of the KIT and use it for R2.
hey i am looking for a new backplug, after the regulater and the valve, the part where the brass oring is going, when i take it out i exidently scrats it, where tie brass oring is going there is now a deep cut, where can i order new one? R3M
Dear Mr Ed, Big Fan of your work,if i live in Romania how can i order a gun from you guys? Thank you for such a nice job and keep posting other videos as well.
Hi There. I live in Uk where air rifles can only have 12ftlb of power unless You have FAC. I want to buy this rifle as have my FAC coming to me soon and my questions is - can You turn it up over 12ftlb using simply adjuster screw or do i need to wait till i get my FAC to buy stronger fac model? If it can be adjusted what's the max power I can get from sub 12 UK version using adjustment screw? Thanks
That's not what I meant. I want to buy sub 12 here in UK and then turn it up only using screw. is it possible and what's the max power I can get out of it if I do that? Thanks
Easy way, can be delivered with the weak spring and the strong spare spring. Just change them and no problem. In .22 up to 45 Joles, in .25 up to 75 Joles.
Hi mr. Ed, can you tell me please which aluminium grade you use to build the air reservoir and could you tell me please what outer diameter and wall thickness has ? Thank you .
TheEDgun i've read that the D16T is close equivalent to 2024 grade aluminium alloy in Europe and west. About wall thickness, you probably use 3,5mm successfully due to the threadless fittings in reservoire. Thank you for answer.
Hello Ed. Thanks a lot for such an informative video about my favorite PCP Airgun. Could you please let me know how I can get Edgun Matador .22 in India?
excellent video man...very informative as far as edgun owners are concerned.do you have any facebook account..........one can easily ask any problem related to edguns.thanks.
thank u or the reply Sir edgun!i figured out a way to make it more solid ! thank u ! just ordered my multishot kit from Tony, cant wait to install it ! Thank u again !:) edgun short is amazing for me,make a .25 short ;p
Hope you like it. I've sold pretty many EDgun to Saudi Arabia last year and have three meeting apointed with people from Saudi Arabia next week at IWA 2017, Nurnberg, Germany. Hope to keep going on selling guns to your country. If you want a direct contact you can send me feedback message from www.edgun.com/en
I like it too much. it's form Russia.You are doing great work on it. But unfortunately it's not popular in Saudi Arabia. They thought it's very complicated airgun. Thank you.
offered to pay me very thich.mau which the design of this type of air gun but did not enter the pay can be used to ask her drawings constitute the proper operation of this gun, sir
Valve stem problem existed since day one for years now with .25 cal. & more so with .30 cal. I do not think Ed has a solution, all he is doing is experimenting and hoping that some day it may work out. There is something wrong with that mentalaty
This what after sales service should be.all gun manufacturers should come closer to the end users and listen to their needs and utilize available tools to communicate with them. A great video Ed and please keep up your intelligent and distinguished ideas and inventions. Wish you all the best.
Hi,
just an awesome video for EDgun owners, this is the great caring!
Best regards
Ari
p.s. the guy from kuwait can eat his socks!
Thanks for the very informative and detailed description video :) Now we need one for the Velez.
Excellent video Ed, all my questions and wonders were answered in the video... Thank-you
Ed this is why your a genius in my eyes and that is why your Edguns cost what they do and I have no problam paying what there worth and that is why I own 3 of them because I love them all. Thankbhou
All i have to said about it is that my next gun it sure will be an ED gun ...thank you mr.Ed you are the man .....
Really educational video, This will be the best for long range shootings.
Just stumbled onto this one. Finally, I don't have to use Google translate for your videos.
Thank you so much for taking the time in making this one in English.
Hope you make more.
***** Thank you, I wil try!
Ed so I have a new standard. I have about 500 shots in the gun and it has lost some meters per second. Should I adjust the hammer spring or the regulator?
Shoot another 500-1000 pellets, then adjust.
Ed
I just got mine to day in .25 cal and all i have to said is...amazing .....thank you for making this incredible piece of machinery Ed....
+Dario Bisogno I do hope you will be completely satisfied with it!
+TheEDgun I am already sir
+Dario Bisogno Glad to hear that!
+Dario Bisogno Hi Eduard what is the deal with Valve stem why people complain abut it?? since i got the gun i didn't have any problem so far
+Dario Bisogno Some valves at .30 are not working properly, it doesn't touch any .22 or .25 who works in the optimal regime.
finally full distribution for the matador thx Ed and we hope u can supply all distributors withe all the spsre part needed Thx
Hi Ed, could you please pass all the measures used in the Matador Orig? Particularly I need measurement oring that is on the brass ring in the barrel, but I think it would be useful to have measures of the rest Thanks for everything
Tere Ed, kas te võiksite läbida kõik meetmed, mida kasutatakse Matador Orig? Eriti vajan mõõtmine Öring mis on messingist sõrmus barrel, kuid ma arvan, et oleks kasulik omada meetmete ülejäänud Aitäh kõige eest
Hi Ed where are all the .177 magazines!! I need more now.. Please send some to dase shop.. Desperate
Hi Ed. That valve stem that is partially plastic,Do you have plans to make it all metal ? You mentioned yourself if it is broken just order a new one.I hear they brake often 5-6000 shots on .25cal & up to 1000 shots on .30cal. This is the only reason I have not bought this gun yet.
The metal valve is too heavy and increase the time of opening the valve, thus increase the air consumption.The valve itself cost only 15 euro, so replace it is a 15 minutes work. If you have warranty you will get it for free. In .30 we will make the metal ones as the air consumption is not the critical point at this caliber already. In .22 and .25 we changed the design of the valve and I hope it will las much longer now.
we want video about chang o rings for matador 👌
thanks for an english version ed and the simple instruction, may i ask did you ever make the multi shot replacement for the matador r2 that i have many thanks ...del
I have only KITs for Matador R3 now, the only difference is the way of barrel fixing. So, one can cut the part of the front breech of the KIT and use it for R2.
hey i am looking for a new backplug, after the regulater and the valve, the part where the brass oring is going, when i take it out i exidently scrats it, where tie brass oring is going there is now a deep cut, where can i order new one? R3M
Great video by the way 👍
21-19 pressure, muzzle velocity 259, 18-16 pressure, muzzle velocity of 252 this is how?
After how many tins would you normally clean the barrel?
VerminSniperUnit When the accuracy goes up, that is time to clean the barrel.
Please tell if the scope rail is angled in order to compensate the pellet drop or it is completely parallel to the barrel?
Yes, it is 0/5 degree.
Dear Ed, I have a multi shot kit for the R3 but it does not have the O ring as in 22:04.
There is just a recess Is that OK?
Send me e-mail to the feedback from the site edgun.com
Dear Mr Ed,
Big Fan of your work,if i live in Romania how can i order a gun from you guys?
Thank you for such a nice job and keep posting other videos as well.
Send me e-mail in feedback from edgun.com and I will explain you how to get it. I've sent some guns to Romania before.
Hi Ed, what shot count can I expect from 177 calibre r3m please set at sub 12ft/lbs?
Have no idea, as it was designed for more energy, I expect about hundred.
TheEDgun I'm getting Atleast 200!
Hi There. I live in Uk where air rifles can only have 12ftlb of power unless You have FAC. I want to buy this rifle as have my FAC coming to me soon and my questions is - can You turn it up over 12ftlb using simply adjuster screw or do i need to wait till i get my FAC to buy stronger fac model? If it can be adjusted what's the max power I can get from sub 12 UK version using adjustment screw? Thanks
No problem to adjust it down 12 ftlb. You can write me to the feedback from www.edgun.com
That's not what I meant. I want to buy sub 12 here in UK and then turn it up only using screw. is it possible and what's the max power I can get out of it if I do that? Thanks
Easy way, can be delivered with the weak spring and the strong spare spring. Just change them and no problem. In .22 up to 45 Joles, in .25 up to 75 Joles.
Hi Ed! I'm from Philippines, where should I order to buy? And how much do I will pay?
You should contact Brian from www.edgunwest.com
hi ! I Want to know how many shoot this barrel can take? 10000 shoot? or 20000?
Hi mr. Ed, can you tell me please which aluminium grade you use to build the air reservoir and could you tell me please what outer diameter and wall thickness has ?
Thank you .
It is Russian D16T, I have no idea about West analog. The outter diameter is 38 mm. the wall thickness is 3.5 mm.
TheEDgun i've read that the D16T is close equivalent to 2024 grade aluminium alloy in Europe and west. About wall thickness, you probably use 3,5mm successfully due to the threadless fittings in reservoire.
Thank you for answer.
Hello Ed. Thanks a lot for such an informative video about my favorite PCP Airgun. Could you please let me know how I can get Edgun Matador .22 in India?
You should write me e-mail to ed(at)edgun.ru
Hi Ed,
Will be dangerous for the airgun shoot it without a pellet inside?
Thanks and regards from Costa Rica!
No problem.
So Ed. All the Edguns leave the factory at around 280-285 mps correct ?
Correct.
TheEDgun Thanks Ed. LOving my Guns. Excellent work.
Any chance to put saftey in this gun by modifiaction ?
Can you transfer it to Vietnam? I want to buy it.
I'm using the edgun matador r3, is there anybody know where to buy the kit to change from r3 to r3m? Thank you
excellent video man...very informative as far as edgun owners are concerned.do you have any facebook account..........one can easily ask any problem related to edguns.thanks.
What is the pressure at 25 cal regulator and what the 22 cal...??? thanks for all..!!!
130 bar both.
What are the regulators set to in 177 cal Ed?
110 bar
TheEDgun really OK thanks
my r3 doesnt have second part for holding gun to stock,it ok but not at as solid and moves slightly.
Well, if it works well and you don't have any problems with accuracy and stability, just forget about it.
thank u or the reply Sir edgun!i figured out a way to make it more solid ! thank u ! just ordered my multishot kit from Tony, cant wait to install it !
Thank u again !:) edgun short is amazing for me,make a .25 short ;p
What is the bridge compensation value?
0.5 degreee
Hi ED,
very interesting video.
I am from Saudi Arabia. How can I contact you?
I have R3M 6.35.
Thank you
Hope you like it. I've sold pretty many EDgun to Saudi Arabia last year and have three meeting apointed with people from Saudi Arabia next week at IWA 2017, Nurnberg, Germany. Hope to keep going on selling guns to your country. If you want a direct contact you can send me feedback message from www.edgun.com/en
I like it too much. it's form Russia.You are doing great work on it. But unfortunately it's not popular in Saudi Arabia. They thought it's very complicated airgun.
Thank you.
hi Ed does the offset moderator for the matador fit the morana?
No.
+TheEDgun thanks Ed. how can I get one for a morana in .22 in the uk?
I don't have them for Morana :(
How I get the regulator for .177 pcp in Indonesia?
Winardi Cfc I can send it by ground mail, it will cost you 100 euro, shipment is included.
En español puede realizar el video
How to install the spring?
To where?
21-19 pressure, muzzle velocity 259, 18-16 pressure, muzzle velocity of 252 this is how?
How long range shooting target?
Nomally up to 100 meters.
TheEDgun Yes, do I need to set the height of the bridge?
TheEDgun yes
TheEDgun strelokpro
How to set
我想问问如何购买了,我在中国?
李易 在中国 应该 没办法
李易你愿意出多少钱?
兄弟 你买了吗 哈哈
All that is complex is not useful, all that is useful is simple
I just received my 22 and 25 edguns...
Nice air gun ,...if i have it ..hehe
Эдуард, вместо magazine ИМХО лучше говорить clip, это более разговорный вариант.
offered to pay me very thich.mau which the design of this type of air gun but did not enter the pay can be used to ask her drawings constitute the proper operation of this gun, sir
Didn't understand what you meant!
TheEDgun I would like to export the drawings to make such a passion put to use only, rather imported to Vietnam thaanhf price too high
who sells the EDGun in the united states???
+markber69 Representative in USA
E-mail: trudenko@yahoo.com
Company: EDgun USA
Name: Tony Rudenko
WTF! An over 1.5k air gun does not even come with qualified screws! The 2 screws on the end of the bridge are irregular! Now no tools can remove them!
GUN SMITH What screws are you talking about? All the screws used in the gun a standards ones, you can buy them in the shop.
very nice, but not $2,000 worth of pellet gun in my opinion
R Mộtcám ơn bạn và tôi muón 1 cái q gồm băng đạn thì mua nhu thê nao
please add Turkish subtitles
How? I don't speak Turkish. By the way I am in Sranbulbnow :-)
Как спрашивал Матроскин у Шарика: ..и не жалко тебе зверушек стрелять? =) =)..
Нет.
Valve stem problem existed since day one for years now with .25 cal. & more so with .30 cal. I do not think Ed has a solution, all he is doing is experimenting and hoping that some day it may work out. There is something wrong with that mentalaty
hieu duoc chet lien