Это видео недоступно.
Сожалеем об этом.
M855 Green Tip Vs Body Armor - Predator Armor
HTML-код
- Опубликовано: 19 май 2022
- Many Level III plates will not stop M855 Green Tip rounds. The M855 is outside of the NIJ Level III Standards. Predator Armor's Level III plates exceed the standards and are able to stop the M855 Green Tip.
Get yours today at: www.predatorarmor.com
"Aim for the face." - Peter North
"What if they shot you in the face?" - Lloyd Christmas
That made me spit out my drink 😂
LIBERAL.....
@@predatorarmor “that was a risk we were willing to take.”
Look at the spalling that flew into the wood though. I don’t want that in my throat.
They make these with plates with a Kevlar spall protection 👍🏼
@@3nealweber3 id rather have ceramic plates than hope a steel plate is gonna protect me
and the moron wasn't even wearing eye protection
Use ceramic plates
@@crosspointholsters1636 without a coating even ceramic is going to spall and throw crap everywhere the coatings are what stop that from happening along with the carrier
Ah, so m855 won't penetrate steel plates, but it will shred the carotid arteries when the round spalls
You order them with kevlar covering
@@bigmikestan yeah but some people are unaware of that Yk
@@bigmikestan or wrap them in duct tape 😂
@bigmikestan where can you find that? I've only seen them talk about "anti-spalling" material but it's never Kevlar. I would love to buy something like that though😊
It will probably go through the soft armor
Shooting metal at short range with no eye protection? You're a madman! Steel tipped ammo no less!!!
Steel core... Not tipped
Don't be a puss.
@@Roboticdoughbull3kyou’re that guy
Will it stop a green tip out of a 20inch barrel
If you’re running a 20 inch and not shooting 69 or 77 grain.. wasting time. M193 from a 20 will do far more penetrating than an m855
Let me repeat someone else's comment, try the green tip out of a 20 inch barrel.
That is what it was designed for, and the loss of velocity with the 16 inch barrel is enough to prevent it from working.
Correct. Was never meant for a short barrel
Yup. My X95 18” barrel will penetrate AR500 target steel plates using PMC XTAC 62gr “green tip”.
Need a 1:8 twist or 1:7 twist for these rounds! 16inch barrel. Preferably the Winchester m855 not PMC.
20in with 1:10 is the best setup for M855 to my knowledge. You agree?
My cmmg wasp is 16" and 1:9 and it's got a hell of a penetration for a 16"
The steel core in M855 was originally designed to add weight in the nose of the projectile and not as a LAP round. This allowed the designers to maintain specified overall length.
The unintended effect of the steel core has it’s benefits though.
Wrong it was designed during the cold war to defeat Russian body armor
Then they would have just used lead for weight, as lead is heavier than steel. The ss109 penetrator as it is called, was designed to defeat body armor back in the day.
You mean REDUCE weight in the nose. Also, enables longer OAL projectiles for better stability in flight and still “tumble” terminally in soft targets.
Armor? No no, your legs are mine. Then your head.
Try same rounds with a 24"barrel
It's a great thing to show the iner construction of a bullet before shooting it. It clears' a lot of confusion. Really appreciates that. Thank you 😇😇😇🙏🙏🙏
Will you test black tip also?
I ordered some of your plates a few months ago with the Kevlar coating based on other videos I watched. Seems like good stuff. I did a presentation on M855 against a soft target at 500 yds. Next will be one with some ballistic gel. You guys are out of Delta right? I originally hail from Beaver Ut.
That range is dangerous with all them rocks
Were you born gay or did it develop over time?
@@jasonshink6589 he was definitely born gay
Fellas is it gay to not die while doing a hobby? @@tokyo6186
Children.
Imagine being the guy standing next to the person wearing this lol
I came across a lot of these for sale at my local gun store one day yrs ago. I went to the range, happened to have alot with me on accident since I save em and they told me I'm not allowed to use that specific 5.56. ROLMAO LOL 😂.
Try it with a 35gr 223 round and a 20-24inch barrel
Steel plates are targets not body armor
With the availability of low cost of lvl IV ceramic plates why anyone would wear steel is beyond me
Hope your able to deal with spall wounds to you neck chin and arms
@Puddles
Do yourself a favor and search “spall off steel” here on YT if you think its gonna be “a few fragments.” I hope you have foreceps and celox rapid in your ifak.
Educate yourself instead of hurling half_ssed insults.
???😒most of the ceramic plates "I've" seen are about Double the price of steel.
Some of us have quite limited income.
@@marknorwood7521
RMA armament part# 1155 level IV nij certified in stock and ready ship for $144.99 each.
Thats easy to budget for over steel plates.
We need a ladder test of calibers until penetration is reached. And some .277 fury action.
Spalling will get ya tho
that's what the spall coating is for. yes, the coating does effectively capture the spall.
@@TheJBerg bed liner doesnt do anything
@@crosspointholsters1636 it passes the balloon test... Put balloons around the plate, shoot it with and without the coating: without will pop balloons, with won't at all.
@@TheJBerg thats not even accurate at all. steel plates are heavy, reverb all that energy into your body. spalling hits you in the face. ceramic is better
I would have at least had safety glasses on
especially with no spall coating....
My throat hurts boss and my ribs I can’t breathe
Ive seen it go through cheap lvl 3 that plate yall got is pretty damn good try that with a 20" and a 1:10
I'm a happy buyer! Good stuff, guys.
Can u please sugest the website.
Can you test m193 out of a 20in barrel?
Yea thats the question, the M193 always seems to give plates an issue over M855.
@@davidtennien39 I use ceramic plates but the reason I would never use a steel is because the most common version of the 223 round punches right through them in every test I've seen. It's kind of a concern I wouldn't use them unless they figured out a way to stop them which I'm sure it's possible with a backer of some kind I think it would be nice to have a reusable plate if they existed
The Level III plate will not stop m193 out of a 20in barrel. The velocity on the round is too high. Our Level III+ plates will stop the m193 out of a 20in barrel. It is specifically designed to stop higher velocity rounds. We did a test video on that already. Go check it out.
ruclips.net/video/eJg8Vog79Ys/видео.html
@@predatorarmor I'll check it out
@@predatorarmor Is that just cause velocity? From what I've seen, it's the 3300fps that gives level 3 steel an issue. The 62grs, I've never seen them chronoed that high on youtube. --- I've pulled GTs out of m855 and reloaded them spicy over TAC to get 3317-3382. Of course it isn't a "safe pressure load" -- but no pressure signs show on nickel brass. (I'd not use this for anything but an "armored emergency" of course... but I've never seen it done.)
nice demonstration. now that i think about it 3/8 ar500 will stop m855 so this isnt that crazy. nice explanation of how it not only meets but exceeds lvlIII
No eye or earpro while shooting a steel plate at close range? Cmon man, that's just plain idiocy
Lol are you shooting an AR without Ear pro?
Forgot the ear protection. Didn't realize until everything was set up and didn't want to go back to get some. Sacrifices made for our audience.
@@predatorarmor Lol, well said, props to you for trucking through it like a boss. I hope your ear drums are okay.
I generally rock an m193 norma 55gr at 3200+ out of an 18" x95 for home defense. Will take out everything but level 4 armor. And if level 4 is coming thru my door Im probably already evacated or fighing on the front line.
You got and vid evidence? I'm loading Hornady 55gr very hot. No pressure signs, but chronos at: min: 3373 max 3423. No pressure signs on the nickel coated brass.... but pressures exceed sammi for the 223 Wylde 18" BA barrel -- by a few thousand from the calculators I plug it into.
Other than sighting in / getting a dope card on it -- I save the barrel life for SHTF armored zombie pigs (Don't know when the hot loads will kill it.)
No ear or eye pro, come on dude! I like my plates though, good vid.
You need green tips if you are running an inferior platform (16" Carbine with 9:1 or 8:1 twist).
Straight up FMJ's out of my 20", 12:1 twist M16 will out perform green tips out of a carbine all day long.
M193 would go right tru it with 20inch barrel like the original m4a1...but the spall with steel plates is the killer/worry even spall coating aka line x doesn't do much just makes you think it does
Coating duh, ceramic plates spawl ass well
@colbywood7667 yeah those coatings don't do much DUH!!!
The spalling will kill you thought. Look at the wood frame closely when bullet impacts. It damaged the wood pretty bad 😆
You're supposed to get the kevlar covering
Yet they don't have a video up of them shooting this plate with kevlar covering. Makes people skeptical that it would be enough to catch the spalling..@@bigmikestan
Ceramic spawl as well and you get the coating
Do it with M193 out of a 20 inch barrel
Bravo.thenks
Holy spalling Batman. Hell no, hell no, hell no... Buy ceramics.
Everyone thinks green tip means goes through everything when really it just goes further after hitting something
It was designed to penetrate Soviet metal helmets.
I’m sure most people were talking about soft armor
Yeah better find ceramic plates if you don’t want that shrapnel in ya neck.
that wasnt a green tip bullet
Can you do m193 vs your III and III+?
theres no point bro
@@21exodus I know. Just wanted to see if they'd respond, which they are upholding their reputation and not responding.
We have a video testing the m193 out of a 20" barrel on our III+. Depending on the the barrel length of your gun the m193 will penetrate the Level III armor. It reaches a high enough velocity that it will penetrate. Our Level III+ plate is designed to stop the higher velocity rounds. Check it out.
ruclips.net/video/eJg8Vog79Ys/видео.html
This is literally the first youtube video where someone (well besides me) correctly identifies the internal construction of M855.. :D
Great plate for the weight but need spalling protection. I have a ar500 3+ plate and weights 13:pounds. So this one it’s lighter but if no spalling coating no one it’s gonna buy it. NO ONE!!
With all that spalling, you wish you were dead. 😂
You do know they have a kevlar spall and fragmentation containment layer right as an option right?
Aim below the plate......
Where can i buy this & is it deliver in India?
Can you hook a brother up?
M855 penetrates soft level 3 not steel
Have any vids of which soft lvl3 beats m855s? velocity matters? -- (I agree with what you said, looking for oneoffs.)
@@clarehodgekins3570 yeah Buffman has one using low velocity rounds
The spattering alone will kills the wearer.
20" gang
Maybe you need to back up a liitle so the bullet can get some speed up before hitting that. I'm sure if it is used for the soldiers that they would be getting shot at more than a few yards, that was pistol range.
Learn ballistics/physics before commenting. At 30 feet from the muzzle, a bullet is already slowing down. They do all of their “getting up to speed” INSIDE the barrel.
Try it with M955
Where would you even get a good supply from?
M855 gets stopped by all level 3 steel plates but not poly ethylene plates. Try this with m193 16-20 inch barrel lol or better yet will it stop m855a1
Likely their III+ will stop M855A1.
I smell a challenge!!!!
Our Level III+ will stop M855A1. We have a video of it on our social media.
Link: instagram.com/p/CPZY4Ten12J/?igshid=NmZiMzY2Mjc=
M855 beats level 3 from a 20 INCH barrel. There are multiple youtube videos showing that level 3 stops m855 from a 16, but not a 20.
Show your tests from a 20 inch, or youre not proving anything. We already know that 99% of steel plate level 3 stops m855 from a 16 inch barrel.
All I learned here is to not put my life in your armors hands. Bc you put it up against a test you KNEW everybody on the market passes, then said "that means we're better".
But will it stop the #kingofarmordestruction :D
Must be a steel plate with all that spawling
Green tips were designed to penetrate Russian titanium armor.
XM193 will put you a hole in that plate
That depends on the length of the barrel and distance. Velocity is the factor at play here. The Level III plate will stop M193 from a 16" barrel and the Level III+ will stop it from a 20" barrel, at 15 yards. Depending on distance the Level III will stop it as well.
Won't stop m8551a..
Idk understand the big deal about ppl upset about steel plates and spall, like if someone is legit going to buy this for the 1 in a million chance the sh*t hits the fan. Or it sits in your closet for 25 years, I’d rather have fragments in my cheeks neck ect than a gaping a** hole in my chest. Idk my 2 cents to the hole spall deal
because you can get ceramic for very affordable prices nowadays and spall will absolutely kill you
@@tomboysupremacist my point was that you also would die with a chest impact with nothing there at all, just saying better than nothing and if someone can’t afford something get what you can
@@evankloepper a set of level IV hesco 4401s is like $230. there really is no better value all things considered
🇦🇺😎👍Nice🏁
The m855 otherwise the ss109 was originally designed to defeat a Soviet Helmet at distance. Try plates with a round say like 6.5 Grendel or God forbid a .30/06 black tip. Yeah it might not penetrate but it is going to ring Your bell.
One in the off switch.